About Product Description Generic LDPE Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Density D-method 0.925 g/cm³ GB/T 1033.2 Melt Flow Rate 2.16 g/10min GB/T 3682 Particle appearance 0 gkg SH/T 1541 MECHANICAL Nominal value Unit…
About Modified PPE 10% Filler reinforced Flame retardant V-1 Electrically Conductive, Stiffness High, Warpage Low&& Product Description Supplier Asahi Kasei Generic PPO(PPE)+PS Material Status Commercial: Active Features Good Rigidity,Low warping,Conductive,V-1 Availabilitys Africa & Middle East ,North America,Asia Pacific,Europe Process Methods…
About 40% Glass Reinforced, Enhanced Mechanical Strength&& Product Description Supplier DSM Material Status Commercial: Active Features V-0 Availabilitys North America,Europe,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.65 g/cm³ ISO 1183 Molding shrinkage ISO 294-4 TD…
About Ryton® R-4-200NA and R-4-200BL 40% glass fiber reinforced polyphenylene sulfide compounds provide enhanced mechanical strength and low maintenance molding using conventional molding equipment&& Product Description Supplier Solvay Generic PPS Material Status Commercial: Active Features Good Rigidity Availabilitys North America,Latin…
About Product Description Material Status Commercial: Active Features Renewable resources,Good Rigidity,Environmental protection,weathering resistance,high wear resistance ,high machine finish Technical Data PHYSICAL Nominal value Unit Test method Density 1.19 g/cm³ ISO 1183 Mold Shrinkage 0.2-0.6 % ASTM D955 Water Absorption 0.3…
About Product Description Supplier Chang Chun Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Specific Gravity 1.56 Water Absorption 0.2 % ASTM D570 Molding shrinkage 1.0 % ASTM D955 MECHANICAL Nominal value Unit…
About Product Description Supplier BASF Material Status Commercial: Negative Features Low temperature toughness Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.23 g/cm³ ASTM D792 MECHANICAL Nominal value Unit Test method Tensile modulus 26.2 MPa…
About Grivory® HT XE 4027 black 9916 is a Polyamide 10T/X Copolymer (Nylon 10T/X) material filled with 30% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important…
About Grivory® HT XE 4027 nat is a Polyamide 10T/X Copolymer (Nylon 10T/X) material filled with 30% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes…
About BJ368MO is a polypropylene copolymer characterized by good flow, and optimum combination of high stiffness and high impact strength. The material is nucleated with Borealis Nucleation Technology (BNT). Flow properties, nucleation and good stiffness give potential for cycle time…
About SERIES 20 STANDARD ESTER Products based on standard grade saturated polyester. These show strong resilience and tear resistance, excellent abrasion resistance and good stability in water solvents, light and oxidation.&& Product Description Generic TPU-酯 Material Status Commercial: Active Features…
About A soft, black, flame retardant thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material has been designed to meet the Underwriter Laboratories (UL) Subjects 6703, 6703A, 3730 and 1703 material requirements for both junction boxes and connectors…
About PA6 30% glass fiber reinforced injection moulding grade. Natural colour. Suitable for parts requiring high stiffness and good mechanical resistance. ISO 1043 : PA6 GF30&& Product Description Supplier Radici Generic PA6 Material Status Commercial: Active Features HB,Good Rigidity Availabilitys…
About Amodel® AS-1566 HS resin is a 65% glass and mineral reinforced polyphthalamide (PPA) resin that exhibits a high deflection temperature and high flexural modulus. This grade was designed specifically to be cost effective for most applications requiring high stiffness,…
About BE961MO is a heterophasic copolymer. This grade is characterized by an optimum combination of high stiffness, low creep and very high impact strength. This grade uses Borealis Nucleation Technology (BNT) to increase productivity by cycle time reduction. BNT in…
About Product Description Supplier Sumitomo Generic PP not specified Material Status Commercial: Active Features X-Ray Transparent,High liquidity Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 0.900 g/cm³ ASTM D792 Melt Flow Rate 8.0 g/10min ASTM D1238…
About Polybutylene Terephthalate (PBT) based compound. Glass fibres.&& Product Description Supplier LATI Generic polybutylene terephthalate Material Status Commercial: Active Features HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit…
About Product Description Supplier LOTTE Generic ABS transparent Material Status Commercial: Negative Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.09 g/cm³ ASTM D-792 Mold shrinkage rate parallel 0.4-0.8 % ASTM D-955 vertical 0.4-0.8 %…
About A hard, colorable, UV resistant thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material is designed for automotive interior applications requiring low fogging and good appearance. This grade of Santoprene TPV is shear-dependent and can be processed…
About Ixef® 1032 is a 60% glass-fiber reinforced, general purpose polyarylamide compound which exhibits very high strength and rigidity, outstanding surface gloss, and excellent creep resistance. Natural: Ixef® 1032/0008 Black: Ixef® 1032/9008 Custom Colorable&& Product Description Supplier Solvay Generic Paraformaldehyde…