About MAGNUM* 3513 is a grade which combines high impact with good flowability. It is suitable for injection moulding and extrusion applications. The mass (continuous process) ABS technology ensures an ABS resin that combines excellent processability with a stable light…
About Outline: FZ-1140 is a 40% glass fiber reinforced polyphenylene sulfide compound that is well balanced with excellent engineering properties and processability. Color: Black and Natural (Brown)&& Product Description Supplier DIC Corporation Generic PPS Material Status Commercial: Active Features Excellent…
About Outline: FZ-1140-R5 is a 40% GF reinforced PPS compound which provides excellent hydrolytic stability for use of applications exposed to hot water or engine coolant. Color: Black and Natural (Brown)&& Product Description Supplier DIC Corporation Generic PPS Material Status…
About FRIANYL® A3 GF25 V0XI is a Polyamide 66 (Nylon 66) compound, 25% glass fiber reinforced, flame retardant with halogens, free from PBB and PBDE, UL listed V0. It is VDE certified. It is also certified according to railways requirements…
About Ultradur S 4090 G6 LS BK15077 is a 30% glass reinforced PBT + ASA blend. It produces moldings with good surface finish and is resistant to chemicals and stress cracking. It has low shrinkage and warpage.&& Product Description Supplier…
About Teflon ® PTFE 7A X is a white powder with small particle size and high bulk density. The small particle size of Teflon ® PTFE 7A X helps to minimize voids even at relatively low molding pressures. High bulk…
About Product Description Supplier Denka Material Status Commercial: Active Features HB Availabilitys North America,Europe,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.086 g/cm³ ISO 1183 Melt Flow Rate ISO 1133 200℃，5.0kg 5.2 g/10min ISO 1133 220℃，10.0kg…
About Product Description Supplier CHI MEI Generic PC+ABS Material Status Commercial: Active Features High Heat Resistance,Flame Characteristics Technical Data PHYSICAL Nominal value Unit Test method Melt index 26 g/10min 1133 Spiral flow 260℃,2mm 24.7 cm CHIMEI proportion 1.19 g/cm3 1183…
About Product Description Supplier Maoming Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Shrinkage rate flow 1.09 % GB/T 17037.4 vertical 1.2 % GB/T 17037.4 Melt Index 1.49 g/10min GB/T 3682 Ash…
About Product Description Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 1.9 g/10min GB/T 3682.1-2018 Ash Content 0.0155 % GB/T 9345.1-2008 Rockwell hardness 85 R GB/T 3398.2-2008 Mold shrinkage…
About Product Description Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density ISO 2781 MECHANICAL Nominal value Unit Test method Shore hardness 75 Shore A ISO 7619-1 Tensile Modulus 50% 2.9 N/mm² ISO 22654 100% 4.1…
About UV, Steam and Long-term heat resistance, High strength&& Product Description Supplier Idemitsu Generic Polycarbonate Material Status Commercial: Active Features Good Rigidity,Weather resistance is good,Resistance to the steam,V-2 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection…
About Product Description Supplier Celanese Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1490 kg/m³ ISO 1183 Molding shrinkage Parallel 0.3 % ISO 294-4 Normal 0.9 % ISO 294-4 MECHANICAL Nominal value Unit Test method…
About TAISOX® 8010 is a High Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for extrusion. Important attributes of TAISOX® 8010 are: Good Processability Impact Resistant Typical applications include: Bags/Liners Foam Sheet Straps/Ropes Yarn&& Product…
About A hard, black, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide range of applications. This grade of Santoprene TPV is shear-dependent and can…
About Ceramer and Ceramerplus are high performance polymers and additives based on polyphenylene sulfone (PPSO2). Ceramer and Ceramerplus have excellent thermal stability, inherent flame resistance and universal chemical resistance.&& Product Description Material Status Commercial: Active Features Heat Stabilized,Good Hardness,Solvent resistance,Flame…
About Ryton® XE5430BL 30% glass fiber reinforced polyphenylene sulfide alloy compound provides high ductility and impact resistance along with good thermal stability.&& Product Description Supplier Solvay Generic PPS Material Status Commercial: Active Features Good Rigidity,Good flexibility,Ductility,Solvent resistance Availabilitys North America,Latin…
About Description Good Weatherability, General Purpose Application Mail Box, Sprinkler, Sash Joiner, Toy, Satellite Antenna Cover&& Product Description Supplier LG Chemical Generic ASA Material Status Commercial: Active Features Weather resistance is good,HB Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection…
About Compound based on Polyamide 6 (PA 6). Heat stabilised. Glass fibres. UL94 V-0 classified, halogens and red phosphorous free. Product UL certified. Very good electrical properties.&& Product Description Supplier LATI Generic PA6 Material Status Commercial: Active Features Good Electrical…
About Polyamide 66 (PA66) based compound. Heat stabilised. Glass fibres. UL94 V-0 classified, free of halogens-based flame retardants and red phosphorous. Very good mechanical properties. Very good electrical properties.&& Product Description Supplier LATI Generic PA66 Material Status Commercial: Active Features…