About Product Description Supplier Wanhua Material Status Commercial: Active Features Excellent Processability,Good coloring,weathering resistance,High scratch resistance,Good transparency Technical Data PHYSICAL Nominal value Unit Test method Density 1.19 g/cm³ ISO 1183 Forming shrinkage rate 0.2-0.6 % ISO 294 Water absorption rate…
About Product Description Supplier Trinseo Material Status Commercial: Negative Features weathering resistance,Good Clarity,High Flexibility Process Methods Extrusion Technical Data PHYSICAL Nominal value Unit Test method Density 1.19 g/cm³ ISO 1183 Water absorption rate 0.4 % ISO 62 Mold shrinkage rate…
About Product Description Supplier EMS-GRIVORY Generic PA 6I/X Material Status Commercial: Active Features Hydrolysis stability,Aromatic,Block resin,V-2 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.15 g/cm³ ISO 1183 Shrinkage rate…
About ACRYLITE® Optical POQ compounds are specialty crystal-clear acrylic polymers that provide high optical purity for applications that require high transmission efficiency in long light paths. ACRYLITE® Optical POQ compounds are available in three grades: POQ66, POQ64 and POQ62. The…
About Product Description Supplier LG Chemical Generic PC+ABS Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.14 g/cm³ ISO 1183 Melt Flow Rate 250℃，2.16 kg 6 g/10min ISO 1133 Molding Shrinkage flow ，3.2 mm 0.5-0.7…
About Aramco PMMA R1504UM是一种聚甲基丙烯酸甲酯通用型挤出树脂，具有优异的挤出成型性能。典型应用 用于制造标牌和显示屏的声音屏障，建筑应用和用于普通LED照明的导光板。 型材挤出产品，如管道和棒材。 Product Description Supplier Aramco Generic PMMA Material Status Commercial: Active Technical Data optical performance Nominal value Unit Test method Refractive index 1.49 ISO 489 Total light transmittance 92 % ISO 13468-1 Haze < 0.5…
About Product Description Generic Polycarbonate Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Density 23℃ 1.2 g/cm³ ISO 1183 Melt Flow Rate 300℃，1.2kg 9 – 11 g/10min ISO 1133 Shrinkage rate 0.5 – 0.7 % ISO…
About CALIBRE™ 201-10 is produced in compliance with the US Food and Drug Administration (FDA) and EU food contact regulations. It provides excellent impact resistance, heat distortion resistance and optical clarity. CALIBRE 201-10 product is formulated with mold release. Govt.…
About Product Description Generic Polycarbonate Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Volume Rate 300℃ 10.4 g/10min ISO 1133 MECHANICAL Nominal value Unit Test method Tensile stress Yield, 50mm/min 54.6 MPa ISO 527 Tensile…
About Material code according to ISO 1043-1: PP Heat stabilized polypropylene reinforced with 50 weight percent long glass fibers. The product has low emissions. The fibers are chemically coupled to the polypropylene matrix. The pellets are cylindrical and normally as…
About UMG ABS® 3001M is an Acrylonitrile Butadiene Styrene (ABS) material. It is available in Asia Pacific or North America for injection molding. Important attributes of UMG ABS® 3001M are: Flame Rated RoHS Compliant Typical application of UMG ABS® 3001M:…
About Iupilon® MB1700 is a Polycarbonate + ABS (PC+ABS) material. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of Iupilon® MB1700 are: Flame Rated Flame Retardant&& Product Description Supplier Mitsubishi Generic PC+ABS Material…
About TYPE: Polyester-based grade Extrusion and injection molding grade FEATURES: Excellent mechanical properties, high abrasion resistance, low compression set, good low-temperature flexibility Applications: Wire & cable, tubes, conveyor belt, automotive interior applications, rigid / flexible composite systems, etc&& Product Description…
About Injection-moulding grade containing 30% glass-fibres, for rigid,tough and dimensionally stable technical parts, used in applications with highest demands on hydrolysis resistance such es automotive connectors and housings for electronic units under the hood. The black colored product Ultradur® B4330…
About NORYL™ Resin LTA6020 – Asia is a Polyphenylene Ether + PS (PPE+PS) product. It can be processed by injection molding and is available in Asia Pacific. Typical application: Electrical/Electronic Applications. Primary characteristic: flame rated.&& Product Description Supplier SABIC Generic…
About Torlon® 4301 is a wear-resistant grade of polyamide-imide (PAI) resin. It has a good balance of mechanical properties and wear resistance. It offers high flexural and compressive strength with a low coefficient of friction and outstanding wear resistance at…
About Grilamid® LKN-3H is a Polyamide 12 (Nylon 12) material filled with 30% glass bead. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of Grilamid® LKN-3H are:…
About Product Description Supplier Toray Material Status Commercial: Negative Features V-0 Availabilitys Asia Pacific,Europe,North America Technical Data PHYSICAL Nominal value Unit Test method Density 23℃ 1.67 g/cm³ ISO 1183 Water absorption rate 23℃，24hr 0.02 % ISO 62 Forming shrinkage rate…
About Product Description Supplier Asahi Kasei Generic PA66 Material Status Commercial: Negative Features High liquidity Availabilitys North America,Europe,Africa & Middle East ,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.59 g/cm³ ASTM D792 Shrinkage rate MD 0.20…
About Product Description Supplier DIC Corporation Generic PPS Material Status Commercial: Active Features High impact resistance,Good Dimensional Stability,V-0 Availabilitys North America,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.72 g/cm³ ISO 1183/A Shrinkage rate MD 0.25…