About Description Weather Resistance, Good Flow Application Automotive Exterior Product Description Supplier LG Chemical Generic ASA+PC Material Status Commercial: Active Features Weather resistance is good,Good liquidity Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value…
About PC alloy grade, non halogen flame retardant series Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial: Active Features Bromine free,Ultra high liquidity,Flame Characteristics Technical Data PHYSICAL Nominal value Unit Test method Density 1.19 g/cm³ ISO 1183 Molding Shrinkage…
About Product Description Supplier DSM Material Status Commercial: Active Features Flame Characteristics Technical Data PHYSICAL Nominal value Unit Test method Molding shrinkage Parallel 0.21 % ISO 294-4 Normal 0.65 % ISO 294-4 Density 1550 kg/m³ ISO 1183 Water Absorption 0.05…
About Product Description Supplier BASF Generic PA66 Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About Leona™ 14G43 is a Polyamide 66 (Nylon 66) product filled with 43% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, or North America. Applications of Leona™ 14G43 include automotive, electrical/electronic applications and engineering/industrial parts.…
About Product Description Supplier DIC Corporation Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.93 g/cm³ ISO 1183 Water Absorption 23℃，24 h 0.01 % ISO 62 Molding Shrinkage 0.3 % ISO 294-4 MECHANICAL Nominal value…
About Celanex 3316 is a non-exuding flame retarded (UL and CSA approved V-0 at 1/32 inch and 5V at 1/16 inch), 30% fiberglass reinforced polybutylene terephthalate which has an excellent balance of mechanical properties and processability. It is well suited…
About Purall GA7760 is a high density polyethylene with a good flow and a high density. The grade is used by our customers for all type of injection moulded applications in the healthcare market but also for closure applications. Without…
About Description Flame Retardant, General Purpose Applications IT/OA, E&E, Automotive&& Product Description Supplier LG Chemical Generic polybutylene terephthalate Material Status Commercial: Active Features Flame Characteristics,V-0 Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit…
About Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Volume Rate 11 cm³/10min ISO 1133 Density 1200 kg/m³ ISO 1183 MECHANICAL Nominal value Unit Test method Tensile Strength Yield…
About Product Description Supplier DuPont Generic Paraformaldehyde Material Status Commercial: Active Features Excellent Processability,Heat Resistance, Good Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.42 g/cm³ ISO 1183 Melt Volume…
About Product Description Supplier LG Chemical Generic HDPE Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 190℃，2.16Kg 8 g/10min ASTM D1238 Density 0.957 g/cm³ ASTM D792 MECHANICAL Nominal value Unit Test method Tensile…
About Rilsan® BMVO TLD resin is a polyamide produced from a renewable source. This natural grade is designed for injection molding.&& Product Description Supplier Arkema Generic PA 11 Material Status Commercial: Active Features Renewable resources Availabilitys Africa & Middle East…
About Grivory® GVN-35H black 9915 is a Polyamide 66 + PA 6I/X (Nylon 66+Nylon 6I/X) material filled with 35% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion or…
About Grilamid® TR 90 LXS is a Polyamide 12 (Nylon 12) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of Grilamid® TR 90 LXS are: Flame…
About Product Description Supplier Trinseo Generic PC+ABS Material Status Commercial: Negative Features Weather resistance is good,Excellent Processability,Good surface appearance,High impact resistance,Halogen free,Flame Characteristics,V-0,5VA,5VB Availabilitys North America,Latin America,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density…
About A soft, black, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide range of injection molding applications. This grade of Santoprene TPV is shear-dependent…
About Product Description Supplier Covestro Generic TPU Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.14 g/cm³ DIN 53479 MECHANICAL Nominal value Unit Test method Shore hardness 83 – 87 Shore A DIN 53505 tensile…
About The G1300H and G1350H are suitable for use in a wide range of electrical and electronics components as UL94 HB flammability rating, while the G1302 grade delivers low friction. HB grades do not contain halogen-containing flame-retardants. The GW1458HF offers…
About Product Description Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 230℃，2.16kg 3.31 g/10min GB Ash Content 0.0158 % GB/T 9345.1-2008 MECHANICAL Nominal value Unit Test method Tensile Strength…