About 43% Glass Reinforced Polyamide 66&& Product Description Supplier DuPont Generic PA66 Material Status Commercial: Active Features HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data IMPACT Nominal value Unit Test method Charpy…
About 30% Glass Reinforced, Heat Stabilized, Hydrolysis Resistant, Polyamide 66&& Product Description Supplier DuPont Generic PA66 Material Status Commercial: Active Features Hydrolysis stability,Heat Stabilized,HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data IMPACT…
About Product Description Supplier Nan Ya Generic PA66 Material Status Commercial: Negative Features Fatigue resistance,Good wear resistance,HB Availabilitys Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.50 g/cm³ ASTM D792 Melt index 275℃，2.16kg…
About Product Description Supplier BASF Material Status Commercial: Negative Features Good Rigidity,Good tear strength Technical Data PHYSICAL Nominal value Unit Test method Density 1.18 g/cm³ DIN EN ISO 1183-1-A MECHANICAL Nominal value Unit Test method Shore hardness 47 Shore A…
About Product Description Supplier Chemours Material Status Commercial: Negative Features Food contact compliance,Good melt strength,High purity,Low smoke,Good flexibility,Heat Stabilized,Solvent resistance,Weather resistance is good,Good Electrical Properties,Low moisture absorption,Low liquidity,V-0,High ESCR,Low coefficient of friction,Heat Resistance, Good Availabilitys Europe,Latin America,North America,Asia Pacific Process…
About For inventory control purposes product name may be followed by an X. Products labeled PFA 440HPB and PFA 440HPB X are equivalent and all information in this document is applicable to both. Typical Application Applications for DuPont™ Teflon ®…
About Product Description Supplier Chemours Material Status Commercial: Negative Features Weather resistance is good,Good Electrical Properties,High purity,Heat Stabilized,Low coefficient of friction,Solvent resistance,High liquidity,Good flexibility,Heat Resistance, Good,Low smoke,V-0,Low moisture absorption,Good melt strength,Food contact compliance Availabilitys Europe,North America,Latin America,Asia Pacific Process Methods…
About Product Description Supplier TEIJIN Generic PC+ABS Material Status Commercial: Active Features Halogen free,Good Rigidity,Biocompatible,Flame Characteristics Availabilitys Latin America,North America,Europe,Asia Pacific,Africa & Middle East Technical Data PHYSICAL Nominal value Unit Test method 1.17 g/cm³ ISO 1183 Mold Shrinkage flow…
About Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.2 g/cm³ ISO 1183 Transmittance 2 mm 58 % ASTM D1003 Melt Volume Rate 300℃，1.2 kg 8 cm³/10min ISO 1133…
About Panlite® LV-2250Y is a Polycarbonate (PC) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of Panlite® LV-2250Y are: Flame Rated Good Mold Release Medium Viscosity&&…
About PC1004R resin is a medium-low flow (MFR = 10 at 300°C), natural, FDA food contact complaint, heat stabilized, polycarbonate product with mold release designed for use in the general purpose molding market. Product Description Supplier SABIC Generic Polycarbonate Material…
About 30% Glass Reinforced, Flame Retardant, Polybutylene Terephthalate&& Product Description Supplier DuPont Generic polybutylene terephthalate Material Status Commercial: Active Features Flame Characteristics,V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value…
About Neoflon® FEP NP-3180 was developed for high-speed extrusion of thin coatings of small wire sizes such as plenum cable insulation. It may also be used for small tubing and injection molding of thin wall parts.&& Product Description Supplier Daikin…
About Product Description Supplier Chemours Material Status Commercial: Negative Features Food contact compliance,Solvent resistance,Quick molding cycle,High Heat Resistance,Low moisture absorption,Weather resistance is good,High ESCR,Good Electrical Properties,Low coefficient of friction,Good flexibility,Good coloring,V-0 Availabilitys North America,Asia Pacific,Latin America,Europe Process Methods Injection Molding,Extrusion…
About Product Description Supplier Chemours Material Status Commercial: Negative Features Low coefficient of friction,Food contact compliance,Low moisture absorption,High ESCR,Weather resistance is good,Solvent resistance,V-0,Good flexibility,High Heat Resistance Availabilitys Europe,Asia Pacific,North America,Latin America Process Methods Injection Molding,Extrusion Technical Data PHYSICAL Nominal value…
About Product Description Supplier Chemours Material Status Commercial: Active Features Good Electrical Properties,Good flexibility,High Heat Resistance,Solvent resistance,No viscosity,Heat Stabilized,Weather resistance is good,Good liquidity Availabilitys Latin America,North America,Europe,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 372℃，5.0kg…
About Product Description Supplier Chemours Material Status Commercial: Negative Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com.…
About For inventory control purposes product name may be followed by an X. Products labeled FEP 100 and FEP 100 X are equivalent and all information in this document is applicable to both. Typical Application Wire and cable insulation, small…
About DuPont™ Tefzel 207 fluoropolymer is a special-purpose resin available in translucent, 2.5 mm (0.1 in) pellets. Compared with other grades of Tefzel ®, it has a higher flow rate but still maintains a service temperature of 150°C (302°F). Tefzel…
About Butyl rubber is essentially a product of copolymerization of isobutylene and isoprene. Medium Mooney viscosity. Product characteristics: Appearance – bale of milk-white color; weight of a bale – (30 ± 1) kg; packing – a plastic container; shelf life…