About Reinforced with glass fiber&& Product Description Supplier UBE Generic PA6 Material Status Commercial: Active Features HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.25 g/cm³ ISO 1183 Shrinkage…
About UBESTA 3030 U is a high viscosity, non-reinforced and non-plasticized Polyamide 12 preferably for extrusion application. UBESTA 3030 U shows only low moisture absorption and therefore exceptional dimension stability.&& Product Description Supplier UBE Generic PA12 Material Status Commercial: Active…
About Ultradur B 4520 BK00110 is a medium viscosity, pigmented black, rapidly freezing injection molding grade.&& Product Description Supplier BASF Generic polybutylene terephthalate Material Status Commercial: Active Features Lubricating,HB Availabilitys North America Process Methods Injection Molding Technical Data PHYSICAL Nominal…
About EMERGE™ PC 8600 is a translucent, ignition-resistant and easy flow polycarbonate resin. This resin contains no bromine, chlorine or phosphate additives and is intended to comply with global environmental standards. It has a UL94 flammability rating of V-0 at…
About CYCOLOY CS9610 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) resin is an excellent flammability, low smoke grade that can be injection molded. This non-chlorinated, non-brominated flame retardant PC/ABS has a UL V0 & 5VB flame rating. CYCOLOY CS9610 resin is an excellent…
About TECHNYL® C 218 V50 Black 51 is a polyamide PA6, reinforced with 50% of glass fibre, heat stabilized, for injection moulding. This grade offers high mechanical strength, good surface aspect for injection moulding.&& Product Description Supplier DOMO Generic PA6…
About TECHNYL® C 218 V50 Black 21N is a polyamide PA6, reinforced with 50% of glass fibre, heat stabilized, for injection moulding. This grade offers high mechanical strength, high surface aspect by easy flow & low pressure moulding for injection…
About TECHNYL® C 216 V50 Natural is a polyamide 6, reinforced with 50% of glass fibre, for injection moulding. This grade offers high mechanical strength, good surface aspect for injection moulding.&& Product Description Supplier DOMO Generic PA6 Material Status Commercial:…
About Product Description Supplier Sumitomo Material Status Commercial: Negative Features High Heat Resistance,Good liquidity,Optical performance,HB Availabilitys Asia Pacific,Europe,North America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.19 g/cm³ JIS K7112 Melt Flow Rate 230℃，3.80kg…
About Product Description Supplier Sumitomo Generic PMMA Material Status Commercial: Active Features Good liquidity,Optical performance,HB Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.19 JIS K7112 Melt Flow Rate 230℃，3.80kg 20.0 g/10min JIS K7210 Shrinkage…
About SUMIPEX general-purpose grades can be classified into two basic categories; good flow and heat resistant types. Each grade is available in pellet form. Bead form is available for some grades&& Product Description Supplier Sumitomo Generic PMMA Material Status Commercial:…
About Product Description Material Status Commercial: Negative Availabilitys Asia Pacific Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on…
About Product Description Material Status Commercial: Negative Availabilitys Asia Pacific Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on…
About Product Description Material Status Commercial: Negative Availabilitys Asia Pacific Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on…
About Product Description Material Status Commercial: Negative Availabilitys Asia Pacific Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on…
About MVR (300 °C kg) 12 cm³/10 min; general purpose; medium viscosity; UV stabilized; easy release; injection molding – melt temperature 280 – 320 °C; available in transparent, translucent and opaque colors&& Product Description Supplier Covestro Generic Polycarbonate Material Status…
About Product Description Supplier POLYU Generic TPU Material Status Commercial: Active Features Flow ductility Technical Data PHYSICAL Nominal value Unit Test method Density 1.22 ASTM D792 MECHANICAL Nominal value Unit Test method Shore hardness Shaw’s A 85 ASTM D2240 tensile…
About Polyamide 66 (PA66) based compound. Heat stabilised. Glass fibres. UL94 V-0 classified, with brominated flame retardants, PBB/PBDE free.&& Product Description Supplier LATI Generic PA66 Material Status Commercial: Active Features High impact resistance,Heat Stabilized,Flame Characteristics,V-0,Halogenated Availabilitys Latin America,North America,Asia Pacific,Europe,Africa…
About Leona™ 90G50 is a Polyamide 66 (Nylon 66) product filled with 50% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, or North America. Applications of Leona™ 90G50 include automotive, engineering/industrial parts, fabrics/fibers and industrial…
About Product Description Supplier LG Chemical Material Status Commercial: Negative Features Good surface appearance,Good Electrical Properties Availabilitys Asia Pacific,North America,Latin America,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 0.958 g/cm³ ASTM D1505 Melt Flow Rate 190℃，2.16kg 45 g/10min…