About A hard, colorable, specialty, non-hygroscopic thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. It is designed for use in medical and healthcare applications. This grade of Santoprene TPV is shear-dependent and can be processed on conventional thermoplastics equipment…
About A soft, colorable, specialty, non-hygroscopic thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. It is designed for use in medical and healthcare applications. This grade of Santoprene TPV is shear-dependent and can be processed on conventional thermoplastics equipment…
About Product Description Supplier DuPont Generic PA66 Material Status Commercial: Active Features Heat Stabilized Technical Data PHYSICAL Nominal value Unit Test method Molding Shrinkage parallel 0.4 % ISO 294-4 vertical 0.9 % ISO 294-4 Density 1510 kg/m³ ISO 1183 MECHANICAL…
About Amodel® AS-4145 HS polyphthalamide (PPA) is a a 45% glass reinforced resin that is hot-water moldable. Key properties include high heat resistance, high strength and stiffness over a broad temperature range, low moisture absorption, excellent chemical resistance and excellent…
About Teflon® Lubricated Medium Viscosity Acetal Homopolymer with Low Wear and Low Friction&& Product Description Supplier DuPont Generic Paraformaldehyde Material Status Commercial: Active Features Low coefficient of friction,Lubricating,Good wear resistance,HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process…
About Product Description Supplier Kumho Petrochemical Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Index 16 g/10min ASTM D1238 Bulk density 0.28-0.32 g/cm³ Rubber content 48-52 % MECHANICAL Nominal value Unit Test method Tensile Strength…
About Product Description Generic HDPE Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 0.952 g/cm³ Melt Flow Rate 0.2 g/10min MECHANICAL Nominal value Unit Test method tensile strength 26 MPa Tensile strain…
About Product Description Supplier Audia Material Status Commercial: Active Features Excellent Processability,Elastic,High scratch resistance Technical Data PHYSICAL Nominal value Unit Test method Density 0.9 g/cm³ ASTM D792 MECHANICAL Nominal value Unit Test method Tensile Strength Broken BBrk 7.5 MPa ASTM…
About Product Description Supplier Audia Material Status Commercial: Active Features Elastic,High scratch resistance Technical Data MECHANICAL Nominal value Unit Test method Shore hardness 61 Shore A ASTM D2240 Tensile Strength 8.2 MPa ASTM D412 Tensile Stress 100% 1.3 MPa ASTM…
About Product Description Supplier TEIJIN Generic PEN Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.33 g/cm³ ISO 1183 Melt Volume Rate 300℃，1.2 kg 18 cm³/10min ISO 1133 MECHANICAL Nominal value Unit Test method Tensile…
About Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial: Active Features High scratch resistance,Ammonium-tolerant Technical Data PHYSICAL Nominal value Unit Test method Density 1.17 g/cm³ ISO 1183 Water absorption rate 23℃，24hr 0.1 % ISO 62 Melt Volume Rate 300℃，1.2…
About Product Description Supplier CHI MEI Generic SAN Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the…
About High performance thermoplastic material, PolyArylEtherKetone (PAEK), reinforced with wear additives, semi crystalline, granules for injection moulding, easy flow, FDA food contact compliant, colour black. WG101 does not contain polytetrafluoroethylene (PTFE) or other halogenated additives. Tribological applications with thin cross…
About Hepla® H7020GF H is a Polyamide 12 (PA12) material filled with 20% glass fiber and Heat Stabilizer.Characteristics include:Heat Stabilized.It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Product Description…
About NORYL™ HNA055 resin >PPE+PS-HI< Autoclavable engineering thermoplastic. Biocompatible per ISO10993 (color dependent).&& Product Description Supplier SABIC Generic PPO(PPE)+PS Material Status Commercial: Active Features Biocompatible,High pressure heat resistance Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL…
About PPE+PS blend. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), food contact compliant (restrictions apply). Combines good hydrolytic stability and dimensional stability.&& Product Description Supplier SABIC Generic PPO(PPE)+PS Material Status…
About Iupital® F20-03 is an Acetal (POM) Copolymer material. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of Iupital® F20-03 are: Flame Rated Medium Viscosity Typical application of Iupital® F20-03: Automotive&& Product Description…
About SERIES 25 SPECIAL ESTER Products based on special grade saturated polyester. The features are similar to those of Series 20 but are characterised by a higher resistance to hydrolysis failure and improved flexibility at low temperatures.&& Product Description Generic…
About AKROLOY® PARA ICF 40 black (6128) is a 40% carbon fibre reinforced polyarylamid with good flexural strength and tribological properties as well as reduced moisture. Components with high dimensional stability, independent from moisture content.&& Product Description Generic Paraformaldehyde Material…
About Ultrason S 6010 is a high molecular weight injection molding and extrusion grade with excellent chemical resistance (stress crack resistance) and good solubility in typical solvents (N-methylpyrrolidone, dimethlyacetamide, dicholormethane) used in the production of membranes or coatings. Applications Typical…