About SERIES 25 SPECIAL ESTER Products based on special grade saturated polyester. The features are similar to those of Series 20 but are characterised by a higher resistance to hydrolysis failure and improved flexibility at low temperatures.&& Product Description Generic…
About DURACON® M90-44 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Automotive. Primary characteristic: flame rated.&& Product…
About Product Description Supplier Polyplastics Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com.…
About Product Description Supplier Polyplastics Generic 液态聚合物 Material Status Commercial: Negative Features V-0,Good Dimensional Stability Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.63 g/cm³ ISO 1183 Shrinkage rate Internal Method TD： 0.03 % Internal…
About Product Description Supplier Polyplastics Generic polybutylene terephthalate Material Status Commercial: Negative Features V-0 Availabilitys North America,Europe,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.60 g/cm³ ISO 1183 MECHANICAL Nominal value Unit Test method tensile strength fracture…
About LAPEROS® E463i is a Liquid Crystal Polymer (LCP) product filled with 40% glassmineral. It is available in Asia Pacific. Characteristics include: Flame Rated Warp Resistant&& Product Description Supplier Polyplastics Generic 液态聚合物 Material Status Commercial: Active Features Low warping,Low anisotropy,V-0…
About DURANEX® 330NF is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame…
About TOPAS® 6013M-07 Product Description TOPAS 6013M-07 is an injection molding grade with a wide processing window, especially suited for blow molding processes including IBM and ISBM. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance,…
About TOPAS® 8007S-04 Product Description TOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare…
About EMERGE™ PC 8130 Advanced Resin is an ignition-resistant polycarbonate resin with improved UV stability. It is designed for thin-wall applications and has a UL94 V-0 rating at 1.0 mm. EMERGE PC 8130 is also f1 rated according to UL…
About TOPAS® 5013L-10 Product Description TOPAS 5013L-10 is a high flow, internally lubricated injection molding grade with a 130°C heat distortion temperature. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive…
About Product Description Generic POM Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com.…
About Product Description Supplier Polyplastics Generic PPS Material Status Commercial: Active Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.85 g/cm³ ISO 1183 Water absorption rate 23℃，24hr 0.01 % ISO 62 MECHANICAL Nominal value Unit…
About LAPEROS® E525T是一种液晶聚合物（LCP）产品,含有的填充物为25% 矿物填料。 它,在亚太地区有供货。 主要特性为:阻燃/额定火焰。 Product Description Supplier Polyplastics Generic 液态聚合物 Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.55 g/cm³ ISO 1183 Shrinkage rate TD：1 mm 0.36 % TD：1 mm…
About LAPEROS® S475 is a Liquid Crystal Polymer (LCP) product filled with 30% glassmineral. It is available in Asia Pacific. Characteristics include: Flame Rated Heat Resistant High Flow High Stiffness Warp Resistant&& Product Description Supplier Polyplastics Generic 液态聚合物 Material Status…
About DURACON® HP25X is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated High Viscosity Rigid&& Product…
About DURACON® SW-01 is an Acetal (POM) Copolymer + PE product filled with 10% calcium carbonate. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical…
About DURACON® EB-10 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated Antistatic Carbon Black Conductive&&…
About DURACON® GH-20 is an Acetal (POM) Copolymer product filled with 20% glass fiber. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame…
About DURACON® JW-03 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated Lubricated&& Product Description Supplier…