About Geon™ Vinyl Rigid Molding M4810 is a Rigid Polyvinyl Chloride product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Geon™ Vinyl Rigid Molding M4810 include food contact applications and…
About Product Description Supplier Chang Chun Generic polybutylene terephthalate Material Status Commercial: Negative Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of…
About Product Description Supplier Radici Generic PA6 Material Status Commercial: Negative Features V-0,Halogen free,Flame Characteristics,Low to no phosphorus content Availabilitys Africa & Middle East ,Asia Pacific,Latin America,Europe,North America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method…
About Special unreinforced, medium viscosity injection moulding grade for applications demanding inherent color, transparency and free from specks.&& Product Description Supplier BASF Generic PES Material Status Commercial: Active Features V-0 Availabilitys Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test…
About Grivory® HT2V-5H is a Polyamide 6T/66 Copolymer (Nylon 6T/66) material filled with 50% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of Grivory® HT2V-5H…
About Grivory® HT2V-45H is a Polyamide 6T/66 Copolymer (Nylon 6T/66) material filled with 45% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of Grivory® HT2V-45H…
About 43%的玻纤增强，pa66/6 Product Description Supplier DuPont Generic PA66/6 Material Status Commercial: Active Features High impact resistance,Good wear resistance Technical Data MECHANICAL Nominal value Unit Test method tensile strength Fracture, 23 ℃ 203 MPa ISO 527-1/-2 Tensile strain Fracture, 23 ℃…
About Product Description Supplier DOW Generic Polyolefin Elastomer Material Status Commercial: Active Features Good Electrical Properties,weathering resistance,Good heat resistance and aging,Good Clarity Technical Data PHYSICAL Nominal value Unit Test method Density 0.872 g/cm³ ASTM D792 Melt Index 190℃，2.16kg 4.8 g/10min…
About Product Description Supplier Lubrizol Advanced Materials Material Status Commercial: Negative Features Soft,Good flexibility Technical Data PHYSICAL Nominal value Unit Test method Specific Gravity 1.19 ASTM D792 Mold Shrinkage 0.3-0.8 % ASTM D-955 MECHANICAL Nominal value Unit Test method Shore…
About PE 15803-020 is a film grade of low-density polyethylene. The grade is additive free. Typical Applications: PE 15803-020 is recommended for film extrusion, including thin films, food packaging and technical films. It complies with EU Food Contact Regulations.&& Product…
About 14% Glass Reinforced, Toughened, Polyamide 66&& Product Description Supplier DuPont Generic PA66 Material Status Commercial: Active Features HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data MECHANICAL Nominal value Unit Test method…
About Molding compound with excellent heat resistence, mechanical strength, and light transmission up to 93% Application: LGP (light guide panel)&& Product Description Supplier Double Elephant Generic PMMA Material Status Commercial: Active Features High Heat Resistance Availabilitys Asia Pacific Process Methods…
About Product Description Supplier Trinseo Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.18 g/cm³ ISO 1183 Melt Flow Rate 230℃，3.8 kg 27 g/10min ISO 1133 Molding shrinkage Flowing flow 0.2-0.6 % ASTM D955 Water…
About Product Description Supplier Lubrizol Advanced Materials Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Specific Gravity 1.11 ASTM D792 MECHANICAL Nominal value Unit Test method Shore hardness 93 Shore A ASTM D2240 Tensile Strength 37…
About CYROLITE CG-97 compound is an impact-modified acrylic-based multipolymer for molding and extrusion of medical applications. Typical properties of CYROLITE® acrylic-based multipolymer compounds are: excellent chemical resistance to fats and oils excellent bonding and welding capabilities excellent bonding to PVC…
About Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial: Negative Features Ultra high liquidity Technical Data PHYSICAL Nominal value Unit Test method Melt Volume Rate 18 cm³/10min ISO 1133 Density 1200 kg/m³ ISO 1183 MECHANICAL Nominal value Unit Test…
About Product Description Supplier Wanhua Material Status Commercial: Negative Features Excellent Processability,Good coloring,weathering resistance,High scratch resistance,Good transparency Technical Data PHYSICAL Nominal value Unit Test method Density 1.19 g/cm³ ISO 1183 Forming shrinkage rate 0.2-0.6 % ISO 294 Water absorption rate…
About Luran® S KR2867CWU is a blend of ASA and PC with enhanced flowability. It particularly offers flame retardancy including V0 classification. FEATURES Highest flowability V0 classification APPLICATIONS Office equipment&& Product Description Supplier INEOS Generic ASA+PC Material Status Commercial: Active…
About SABIC® PP CX02-81 is a high crystalline copolymer. It offers high stiffness in perfect balance with high thermal dimensional stability, impact resistance and flow. This material has excellent aesthetic properties as well and is typically used for automotive interior…
About Product Description Generic PS (HIPS) Material Status Commercial: Active Features Mechanical property,Good flexibility,high-rigidity Process Methods Extrusion Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 200℃，5kg 3 g/10min ASTM D1238 Spiral Flow 220℃ 44 cm ASTM D3123…