About Nucrel® 0407HS is a copolymer of ethylene and methacrylic acid made with nominally 4 wt% methacrylic acid. It is available for use in conventional extrusion coating, coextrusion coating and extrusion laminating equipment designed to process polyethylene resins.&& Product Description…
About Nucrel® 0411HS is a copolymer of ethylene and methacrylic acid made with nominally 4 wt% methacrylic acid. It is available for use in conventional extrusion coating, coextrusion coating and extrusion laminating equipment designed to process polyethylene resins.&& Product Description…
About Westlake EMAC® SP2207 is a 20% ethylene methyl acrylate (EMA) copolymer designed for extrusion coating, tie-layers, and extrusions where flexibility, compatibility, low heat seal temperatures, or high coefficient of friction are required. SP2207 provides excellent adhesion to polyolefins, polyesters,…
About Optema TC 120 is an ethylene methyl acrylate copolymer, which can be used as an impact modifier or compatibilizer in polymer compounds. Optema TC 120 has been processed on typical LDPE compounding equipment at temperatures up to 625°F.&& Product…
About DuPont™ Conpol® 13B is a concentrated masterbatch made from an ethylene-methacrylic acid carrier and containing 12.5 wt% antiblock. It is supplied in pellet form and is intended for blending with DuPont™ Surlyn® and Nucrel® resins to modify the surface…
About Optema TC 120 is an ethylene methyl acrylate copolymer intended for extrusion coating, coextrusion coating and extrusion lamination where good interlayer adhesion between polyethylene, polypropylene, nylon, PVdC or other substrates is required. It offers excellent balance of adhesion onto…
About DuPont™ Surlyn® 8660 is an ionomer of ethylene acid copolymer. This polymeric material can be processed in conventional extrusion and injection equipment designed to process polyethylene and ethylene copolymer type resins, to create various shapes and sheeting.&& Product Description…
About Elvaloy® AC 1218 is a copolymer of ethylene and methyl acrylate. It is available in pellet form for use in conventional extrusion equipment designed to process polyethylene type resins. 18% Methyl Acrylate&& Product Description Supplier DOW Generic EMA Material…
About DuPont™ Surlyn® 8320 is an ionomer of ethylene acid acrylate terpolymer. This polymeric material can be processed in conventional extrusion and injection equipment designed to process polyethylene and ethylene copolymer type resins, to create various shapes and sheeting.&& Product…
About EMAC resins adhere to and are compatible with a wide range of materials including paper, polyolefins, oriented polyolefins, polyesters, ionomers, PVdC, unplasticized PVC and other polar polymers. For use as heat seal layer, adhesive layer, or modifier for cost/performance…
About ICORENE® N9902 is a random copolymer of ethylene and methyl acrylate, made by high pressure radicalar polymerization process. Due to the methyl acrylate content, this grade is a polymer of choice for softness, flexibility and polarity required.&& Product Description…
About Nucrel® 0908HS is an ethylene-methacrylic acid copolymer resin, made with nominally 9 wt% methacrylic acid. The resin is available for use in conventional extrusion coating, coextrusion coating, and cast film operations designed to process polyethylene resins.&& Product Description Supplier…
About DuPont™ Surlyn® 9320 is an ionomer of ethylene acid acrylate terpolymer. This polymeric material can be processed in conventional extrusion and injection equipment designed to process polyethylene and ethylene copolymer type resins, to create various shapes and sheeting.&& Product…
About Optema TC 220 is an ethylene methyl acrylate copolymer, which can be used in specialty bonding applications and as a toughener for engineering polymers. It can be processed at temperatures as low as 200°F (93°C) and as high as…
About Product Description Generic EMA Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method MA content 20 wt% 日本聚乙烯法 Density 0.942 g/cm³ JIS K7112 Melt Flow Rate 6.0 g/10min JIS K6922-2 MECHANICAL Nominal value Unit Test method…
About LOTADER® 3430 is a random terpolymer of ethylene, acrylic ester and maleic anhydride, polymerized by high-pressure autoclave process. Applications LOTADER® 3430 is a versatile adhesive for extrusion coating or lamination, designed as: Concentrate to be used in dry blend…
About Optema TC 220 is an ethylene methyl acrylate copolymer, which can be used for making alloys, blends and compounds or be injection molded where softness and flexibility are required. It is also an excellent grade for coextrusion coating and…
About Westlake EMAC® SP2404 is a 18.5% EMA copolymer designed for blown film, tie-layer, coextrusions and blending where flexibility and strength are important. SP2404 provides excellent elasticity and low temperature performance. Articles produced from SP2404 will exhibit very high C.O.F…
About LOTRYL® 24MA02 is a random copolymer of Ethylene and Methyl Acrylate produced by high-pressure radicalar polymerization process. Applications Due to its high methyl acrylate content, LOTRYL® 24MA02 can be used for applications where softness, flexibility and polarity are required.…
About LOTRYL® BESTPEEL 2407 is a ready-to-use thermoplastic composition designed to make peelable heat seal layers onto various substrates. The base resin is a random copolymer of ethylene and methyl acrylate, polymerized by high-pressure process in autoclave reactor. Modification is…