About SABIC®HDPE F00952树脂是经过设计的高分子量高密度聚乙烯共聚物 专门用于吹塑薄膜挤出。 它具有广泛的分子分布和高密度结合成功的优秀 具有高膜强度和刚性的可挤压性。 该材料含有抗氧化剂。SABIC®HDPE F00952树脂推荐用于吹塑薄膜挤出。 建议用于制造高强度杂货袋，购物袋和高质量薄膜用于多壁袋衬垫和替代薄纸产品。 加工条件SABIC®HDPE F00952E可以在常规HMW-HDPE设备上挤出，熔体温度在200°C至235°C之间。15μm吹塑薄膜上测量了薄膜特性 BUR = 4。 Product Description Supplier SABIC Generic HDPE Material Status Commercial: Active Features Inoxidizability Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 190℃，2.16kg 0.05 g/10min…

About HDPE 5502 is a high density polyethylene (HDPE) with good compromise between stiffness and Environmental Stress Crack Resistance (ESCR). It has been specifically designed for the manufacture of blow molded packaging for household, industrial and cosmetics liquids. HDPE 5502…

About SABIC® HDPE   PCG5421 SABIC® HDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® HDPE PCG5421 is typically used for the blow moulding of healthcare…

About Daelim Po1y® TR580 is a High Density Polyethylene product. It is available in Asia Pacific or Europe. Applications of Daelim Po1y® TR580 include containers and food contact applications. Characteristics include: Antioxidant Good Processability High ESCR (Stress Crack Resistant) Impact…

About It is is a fully formulated compound for chemical foamed telesingles. Borcell HE1346 is a high-density polyethylene compound containing chemical blowing agent. Borcell HE1346 meets the applicable requirements as below when processed using sound extrusion practice and testing procedure:…

About HD7600M is a High Density Polyethylene (HDPE), copolymer, developed for use in LLDPE and LDPE blends, special for shrink films. This product has gels control and optimized additive for this application. Applications: LLDPE and LDPE blends for shrink films.…

About SABIC® HDPE BM6246LS is a high density polyethylene blow moulding grade for high rigidity, good toughness and good processability. These properties offer bottles to be made at lower weight with very good top load strength. Typical applications. SABIC® HDPE…

About Lupolen 5031 L Q 449 K is a high density polyethylene (HDPE) base material for extrusion of silane crosslinked pipes (PE-Xb). It is not intended for medical and pharmaceutical applications.&& Product Description Supplier LyondellBasell Generic HDPE Material Status Commercial:…

About HI-ZEX™ 1608J是一种高密度聚乙烯产品,。 它可以通过注射成型进行加工,在亚太地区、北美洲或欧洲有供货。 典型应用领域为:工业应用。 主要特性为:良好的刚度。&& Product Description Generic HDPE Material Status Commercial: Active Features Good Rigidity,Good liquidity Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 0.955 g/cm³ ISO 1183 Melt…

About BL6200 is produced by slurry process technology. This resin is ideally suited for use in blow molding application. BL6200 is designed to offer high speed processability, good ESCR. Applications Bottle (small) and household product. (shampoo, bleach, makeup)&& Product Description…

About HIVOREX 5200B is produced by slurry process technology. This resin is ideally suited for use in blow molding application. HIVOREX 5200B is designed to offer high stiffness, excellent impact resistance, good resistance at low temp and chemicals resistance.&& Product…

About SABIC® HDPE CLARENE sets a new standard in optics and aesthetics on brightness. SABIC® HDPE CLARENE 3H677 is a material with a specific molecular weight distribution, typically used for blow moulding of light weight and UN certified cans from…

About R902U is a linear low-density polyethylene resin for rotational molding applications. This grade is available in pellet form. This grade is designed to be processed in conventional rotational molding equipment.&& Product Description Supplier HANWHA Generic HDPE Material Status Commercial:…

About Good Stiffness, Good Impact Strength&& Product Description Supplier LOTTE Generic HDPE Material Status Commercial: Active Features Good Rigidity,High impact resistance Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 0.959 g/cm³ ASTM D1505 Melt Flow…

About YUZEX 8800U provides stronger film than ones made from competitive HDPE film grades and this grade is bimodal type resin. Therefore YUZEX 8800U shows superior stability in film extrusion to that of competitive HDPE film resins and gives excellent…

About Product Description Generic HDPE Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 0.954 g/cm³ ash content 0.02 Melt Flow Rate 0.9 g/10min MECHANICAL Nominal value Unit Test method tensile strength 30 MPa Tensile strain…

About EL-Lene H6105JU is a high density polyethylene resin with UV resistance suitable for industrial product produced from injection molding process.&& Product Description Supplier SCG Generic HDPE Material Status Commercial: Active Features Good Rigidity,Weather resistance is good,Excellent Processability,High impact resistance,Food…

About 7000F is manufactured to be processed in conventional blown film equipment by CSTR Slurry process technology. Thanks to Bi-modal design of molecular composition, 7000F offer both excellent processability and superior mechanical properties.&& Product Description Supplier LOTTE Generic HDPE Material…

About A chemically-crosslinkable HDPE compound for the production of flexible pipes with an improved surface quality for domestic hot and cold water, under floor heating and central heating application. TABOREX-TA 1132 HD is a crosslinkable compound made by Silane grafted…

About CONTINUUM™ DGDD-2480 BK Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation are desired.…