About SABIC® HDPE B1054 is a material with a specific molecular weight distribution, typically used for blow moulding of light weight and UN certified cans from 2 until 20 liters. This product is not intended for and must not be…

About 吉林石化公司生产的JHMGC100S产品为PE100级管材专用料,分子量呈双峰分布,具有较好的加工性能和物理机械性能,优异的耐环境应力开裂性能,适于生产燃气管、给水管等。 Product Description Generic HDPE Material Status Commercial: Active Features Excellent Processability,Bimodal molecular weight distribution,High ESCR Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 0.20-0.26 g/10min GB/T3682 Density 0.946-0.950 g/cm³ ISO 1183-2 MECHANICAL…

About InnoPlus HD7000F is high density polyethylene film grade which well known for the high quality film applications. This grade is excellent for thin film processing with high mechanical strength, good stiffness and good heat sealability. It is suitable for…

About HDB0763 is a high density polyethylene homopolymer, developed specifically for blow molding food containers. It exhibits excellent processing characteristics and extremely low odor in the finished container. This material meets the Food and Drug Administration requirements of 21 CFR…

About Applications Plastic beer, soda or juice boxes Fruit and vegetable baskets Characteristics The Exelene resin HDPE 8000 meets the requirements of section 177.1520, paragraph C, from chapter 21 denominated “Olefin Polymers” from the Code of Federal Regulations of the…

About It is a HDPE compound for solid insulation of telephone singles with high extrusion speed. HE3366 is designed as insulation for petroleum filled telephone cables. It is also suitable as outer skin in “foam-skin” constructions. Specifications HE3366 meets the…

About SABIC® HDPE CLARENE sets a new standard in optics and aesthetics on brightness. SABIC® HDPE CLARENE 3H673 is a material with a high molecular mass, supplied as pellets. This product is not intended for and must not be used…

About C430A is a high density polyethylene with broad molecular weight distribution. This grade shows good processability and mechanical properties, and is designed to be suitable for bottle cap applications such as water and soft beverages.&& Product Description Supplier HANWHA…

About EL-LENE H5604F is a product of bi-modal process from Mitsui Chemicals, Inc. of Japan.&& Product Description Supplier SCG Generic HDPE Material Status Commercial: Active Features Good Rigidity,High impact resistance,Low speed solidification point,Food contact compliance,Moisture resistance Availabilitys North America,Asia Pacific…

About Description LUTENE-H ME1000 is mainly intended for injection molding and compression molding of bottle caps and closures. It has an excellent environmental stress crack resistance and organoleptic property. Applications Cap & Closure for beverage bottles of sparking water Hot-fill…

About Lumicene® mPE M 6040 is a second generation metallocene high density Polyethylene. Lumicene® mPE M 6040 can be processed at high output rates with low extrusion pressure, low neck-in, excellent drawability and gauge control in comparison with conventional LLDPE…

About BL3 is a high density polyethylene grade with broad molecular weight distribution, suitable for blow moulding applications. Characteristics: High rigidity. Good flow ability. Good impact strength. Good stress cracking resistance. Typical applications are: Containers ranging from a few ml…

About Excellent high-speed molding Oxidation Stability&& Product Description Supplier LOTTE Generic HDPE Material Status Commercial: Active Features Quick molding cycle,Inoxidizability Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 0.948 g/cm³ ASTM D1505 Melt Flow Rate…

About This high density polyethylene is an ethylene-hexene copolymer that is tailored for injection molded applications that: Require moderate flow Require excellent impact strength Require good stiffness Are durable and recyclable for sustainability Typical injection molded applications for 9006 include:…

About BorSafe HE3490-LS-H is a bimodal polyethylene compound produced by the advanced Borstar technology. It includes a combination of pigments and stabilisers to ensure excellent long-term thermal stability and UV-resistance. BorSafe HE3490-LS-H is classified as an MRS 10.0 material (PE100).…

About HI-ZEX™ 8800B is a High Density Polyethylene product. It can be processed by blow molding and is available in Asia Pacific, Europe, or North America. Typical application: Containers. Characteristics include: Good Stiffness Impact Resistant&& Product Description Generic HDPE Material…

About EVERCAP™ DMDB-1220 NT 7 High Density Polyethylene Resin (HDPE) enables the right performance properties to meet demanding one-piece closure application needs. It is intended for use in compression molded one-piece closures designed for carbonated soft drinks, pressurized water and…

About High Productivity, Good stiffness&& Product Description Supplier LOTTE Generic HDPE Material Status Commercial: Active Features Good Rigidity,Quick molding cycle Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 0.959 g/cm³ ASTM D1505 Melt Flow Rate…

About P6006 is black compound high density (class MRS 10 – PE 100) Polyethylene with bimodal distribution of molecular mass. It is specifically designed for Pressure Pipe applications. It provides excellent stress crack resistance properties (ESCR) combined with very good…

About Hostalen GC 7260 is a high density polyethylene resin used in general injection molding applications such as closures, toys, housewares and packaging. Hostalen GC 7260 demonstrates good flowability and high rigidity and has been extensively used by customers in…