About Product Description Supplier fpc-tw Generic HDPE Material Status Commercial: Active Features Good Rigidity,High density Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 0.957 g/cm³ ASTM D1505 Melt Flow Rate 190℃，2.16kg 4.0 g/10min ASTM D1238…
About High Stiffness, Good resistance at chemical&& Product Description Supplier LOTTE Generic HDPE Material Status Commercial: Active Features Good Rigidity,Solvent resistance Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 0.964 g/cm³ ASTM D1505 Melt Flow…
About Product Description Generic HDPE Material Status Commercial: Active Features Good Hardness,Good Rigidity Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Particle appearance Black granules 0 个/kg Chromophore ≤15 个/kg Large and small grains ≤10 g/kg Melt…
About TAISOX® 7200 is a High Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for injection molding. Primary attribute of TAISOX® 7200: Fast Molding Cycle. Typical applications include: Containers Bottles Household Applications&& Product Description Supplier…
About Description F920A is a high-density polyethylene resins for blown film applications. This grade is designed to be processed in conventional LLDPE blown film equipment. Characteristics Excellent transparency and high stiffness Good processability Good compatibility with LDPE and LLDPE Applications…
About BM1052是一种具有宽分子量分布的高分子量高密度聚乙烯共聚物牌号。 它有 优异的加工性能和极高的抗冲击强度，刚度和卓越的抗环境应力开裂性能。BM1052树脂适用于吹塑大型容器，如封闭式集装箱，油箱和汽车工业用容器。 它也可以被挤压成具有特别高冲击强度的片材。 Product Description Supplier SABIC Generic HDPE Material Status Commercial: Active Features Excellent Processability,High impact resistance,High ESCR Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 190℃，2.16kg 0.05 g/10min ASTM D1238 190℃，5.0kg 0.38 g/10min…
About B220A is a high-density polyethylene resin for blow molded bottles. This grade can be processed in conventional blow molding equipment.&& Product Description Supplier HANWHA Generic HDPE Material Status Commercial: Active Features Excellent Processability,Good surface appearance,High impact resistance,Food contact compliance,Good…
About SABIC® HDPE ICP5602 is part of SABIC’s high density polyethylene Industrial Container Product portfolio. SABIC® HDPE ICP5602 is typically used for blow moulding UN certified Tight Head drums, from 25 up to 220 liters. This food approved grade combines…
About UNITHENE LH606 is a high density polyethylene (HDPE) suitably used for injection molding and filament applications. Typical applications are the injection molding of fruit crates, food containers, industrial items such as pallets, transportation crates, housewares, toys and the fine…
About 中国石化高密度聚乙烯薄膜料具有卓越的物理性能和良好的加工性能，较高的机械强度，良好的着色性、可印刷性、密封性，具有防潮、防油、防化学腐蚀和高速加工性能等特点。 Product Description Supplier Maoming Generic HDPE Material Status Commercial: Active Features Excellent Processability,Good Printability,Moisture resistance,Good coloring,Good Hermeticity Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Melt flow rate 0.19 g/10min Density 0.946 g/cm³ MECHANICAL Nominal…
About EL-Lene H6670B is a high density polyethylene resin suitable for producing milk bottles by using Extrusion blow molding machine.&& Product Description Supplier SCG Generic HDPE Material Status Commercial: Active Features Good Rigidity,Excellent Processability,Good liquidity,Good Printability,Food contact compliance,Low odor Availabilitys…
About Product Description Supplier ExxonMobil Generic HDPE Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 0.956 g/cm³ ASTM D1505 Melt Flow Rate 190℃，2.16kg 20 g/10min ASTM D1238 THERMAL Nominal value Unit Test method Hot deformation…
About Excellent stress crack resistance and rigidity High impact strength Moderate swell High melt strength Complies with: U.S. FDA 21 CFR 177.1520 (c) 3.2a U.S. FDA-DMF Canadian HPFB No Objection (with Limitations) EU, No 10/2011 Underwriters Laboratories Inc. (ULI) Consult…
About TAISOX® 9003 is a High Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for blow molding. Important attributes of TAISOX® 9003 are: Chemical Resistant High ESCR (Stress Crack Resistant) High Toughness Typical applications include:…
About 5000S is manufactured to be processed in flat yarn for tarpaulin by CSTR Slurry process technology. 5000S is ideally suited for use in monofilament application. 5000S offers good stretching, spinning, high strength property and melting stability.&& Product Description Supplier…
About SABIC® HDPE B4520 is typically used for blow moulding packaging up to 20 l, combining medium stiffness with a good ESCR. This grade is typically used for packaging of aggressive detergents and technical articles such as spare fuel tanks,…
About SHC7260LS-L is a high-density polyethylene, developed for the injection molding which presents high hardness and stiffness, besides low tendency to warpage. This resin has additives against the ultraviolet radiation action. The minimum biobased content of this grade is 94%,…
About TAISOX® 8001 is a High Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for extrusion or pipe extrusion. Important attributes of TAISOX® 8001 are: Chemical Resistant Creep Resistant High ESCR (Stress Crack Resistant) Typical…
About TAISOX® 8003 is a High Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for blow molding. Important attributes of TAISOX® 8003 are: Chemical Resistant Good Stiffness Rigid Typical applications include: Bottles Consumer Goods Containers…
About AXELERON™ CS K-3364 NT CPD is a high-molecular weight, high-density polyethylene insulation compound (“CPD”) specifically formulated to provide excellent oxidative stability, toughness, and abrasion resistance. It provides superior long term aging performance, while providing excellent environmental and thermal stress-cracking…