About Product Description Supplier Fushun Generic HDPE Material Status Commercial: Negative Availabilitys Asia Pacific Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer…
About Product Description Generic HDPE Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com.…
About Product Description Generic HDPE Material Status Commercial: Negative Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com.…
About 中国石化高密度聚乙烯中空料密度较大，模量高，刚性、韧 性好，耐环境应力开裂性能良好，加工性能优异，适用于中 空吹塑中型或大型装运液体的容器。 Product Description Supplier Maoming Generic HDPE Material Status Commercial: Active Features Excellent Processability,High density,Rigid-tough balance,High ESCR,High modulus Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 0.3 g/10min Density 0.955 g/cm³…
About Product Description Generic HDPE Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com.…
About Product Description Generic HDPE Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density THERMAL Nominal value Unit Test method MECHANICAL Nominal value Unit Test method Electrical performance Nominal value Unit Test method Notes 【 Disclaimer…
About Product Description Generic HDPE Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method Shore hardness 64 ISO 868 ESCR(FNCT) 2.5MPa 1.5 hrs IEC CD 16770 Tensile strain fracture ＞1000 % ISO 527 tensile strength yield 29…
About Product Description Generic HDPE Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 0.954 g/cm³ MECHANICAL Nominal value Unit Test method tensile strength 30 MPa impact strength 15 kg/cm² bending strength 24 MPa Tensile strain…
About Product Description Generic HDPE Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com.…
About Description LUTENE-H ME9180 is mainly intended for injection molding of complicated parts. It has high productivity and good appearance. Applications Complicated parts, Light-weight household, Extrusion coating&& Product Description Supplier LG Chemical Generic HDPE Material Status Commercial: Active Features Weight…
About Description LUTENE-H ME8000 is mainly intended for injection molding of bottle caps and closures. It has excellent processing performance. Applications Cap & Closure for beverage bottles of still mineral water and juice, Crates&& Product Description Supplier LG Chemical Generic…
About Description LUTENE-H BE0400 is an excellent material for blow-molded articles with high density and rigidity. It has good flow characteristics and impact resistance. Applications LUTENE-H BE0400 is used to produce for the following parts. lightweight container from 1 to…
About HMA 016 is a HDPE grade, characterized by fast cycling and good impact strength. It has high gloss and high dimensional stability.&& Product Description Supplier ExxonMobil Generic HDPE Material Status Commercial: Active Availabilitys Europe,Asia Pacific,Africa & Middle East Technical…
About Product Description Supplier DOW Generic HDPE Material Status Commercial: Active Availabilitys North America,Latin America,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 0.964 g/cm³ ASTM D792 Melt Flow Rate 190℃，2.16kg 0.75 g/10min ISO 1133 190°C，5.0kg 22 g/10 min…
About SABIC® HDPE M80064 is a high density polyethylene injection moulding grade with a narrow molecular weight distribution. It is typically used for injection moulding applications where rigidity, toughness and warp resistance are required. SABIC® HDPE M80064 is available with…
About SABIC® HDPE M200056 SABIC® HDPE M200056 is a high density polyethylene copolymer injection moulding grade with a narrow molecular weight distribution. It is typically used for easy mold fill-out and low warpage with a good balance of toughness…
About TAISOX® 9001 is a High Density Polyethylene material. It is available in Asia Pacific, Europe, or North America. Important attributes of TAISOX® 9001 are: High Strength High Toughness Typical applications include: Bags/Liners Film Plumbing/Piping/Potable Water&& Product Description Supplier fpc-tw…
About TAISOX® 8050 is a High Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of TAISOX® 8050 are: Good Processability Impact Resistant Rigid Typical applications include: Containers Seating&& Product Description…