About Glass Fiber – Lubricated&& Product Description Generic HPPA Material Status Commercial: Negative Features Lubricating Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.56 g/cm³ ASTM…
About Carbon Fiber&& Product Description Generic HPPA Material Status Commercial: Negative Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.30 g/cm³ ASTM D792 Shrinkage rate MD：3.2…
About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade.&& Product Description Generic HPPA Material Status Commercial:…
About TECHNOMELT PA 638 (e) high performance thermoplastic polyamide is designed to meet low pressure molding process requirements. This product can be processed at low processing pressure due to its low viscosity, allowing encapsulation of fragile components without damage. This…
About Kalix® 2940 is a bio-sourced, polyamide-based compound with 40% by weight glass fiber reinforcement. This material is specifically formulated for high strength and stiffness applications where good impact resistance and excellent dimensional stability after molding are required. The formulation…
About High Temperature polyamide injection molding grade, 50% glass fiber reinforced. Highly improved thermal resistance in contact with hot air. Black colour. Suitable for applications in very severe temperature conditions, where the parts must endure long term contact with hot…
About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade.&& Product Description Generic HPPA Material Status Commercial:…
About Kalix® 2930 HFFR is a bio-sourced polyamide-based material specifically formulated to meet UL 94V2 @ 0.4 mm requirements for electronic devices. The material uses an advanced halogen-free flame retardant package expressly designed to minimize blooming, plate out, and other…
About Kalix® 9945 HFFR is a 45% glass-fiber reinforced, halogen-free flame retardant High Performance Polyamide. It is hot-water moldable and intended for use in components requiring superior mechanical properties, excellent surface quality and excellent flammability rating. Black: Kalix® 9945 BK000…
About Omnix® LF-4060 BK 000-9 is a 60% Long Glass Fiber reinforced, easy-flowing, heat stabilized HPPA with a very high flexural modulus. It exhibits unique stiffness/toughness combination, an excellent retention of properties in a wide temperature range, as well as…
About TECHNOMELT PA 678 (e) high performance thermoplastic polyamide is designed to meet low pressure molding process requirements. This product can be processed at low processing pressure due to its low viscosity, allowing encapsulation of fragile components without damage. This…
About Omnix® LF-4060 BK 000 is a 60% Long Glass Fiber reinforced, easy-flowing, heat stabilized HPPA with a very high flexural modulus. It exhibits unique stiffness/toughness combination, an excellent retention of properties in a wide temperature range, as well as…
About Omnix® LF-4050 BK 000-9 is a 50% Long Glass Fiber reinforced, easy-flowing, heat stabilized HPPA with a very high flexural modulus. It exhibits unique stiffness/toughness combination, an excellent retention of properties in a wide temperature range as well as…
About INVISTA’s Novadyn™ DT/DI is made from monomers DYTEK® A diamine, purified terephthalic acid (PTA) and purified isophthalic acid (PIA).&& Product Description Supplier INVISTA Generic HPPA Material Status Commercial: Active Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical…
About Kalix® 2955 is a bio-sourced, polyamide-based compound with 55% by weight glass fiber reinforcement. This material is specifically formulated for high strength and stiffness applications where good impact resistance and excellent dimensional stability after molding are required. The formulation…
About Omnix® LF-4050 BK 000 is a 50% Long Glass Fiber reinforced, easy-flowing, heat stabilized HPPA with a very high flexural modulus. It exhibits unique stiffness/toughness combination, an excellent retention of properties in a wide temperature range as well as…
About Kalix® 9850 is a 50% glass-fiber reinforced high-performance polyamide. It is hot-water moldable and intended for use in components requiring superior mechanical properties and excellent surface quality. Kalix® 9850 is characterized by high stiffness and strength, very good impact…
About Kalix® 5950 HFFR is a halogen-free, flame retardant (UL-94 V0 at 0.4 mm), highly reinforced polyamide material specifically formulated for high strength and stiffness applications where good impact resistance and excellent dimensional stability after molding are required. The formulation…
About Omnix® FC-9050 is a 50% glass-fiber reinforced high-performance polyamide. It is hot-water moldable and intended for use in components requiring superior mechanical properties even after moisture absorption. Omnix® FC-9050 is characterized by high stiffness and strength, very good impact…
About Product Description Supplier Solvay Generic HPPA Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…