About LCP-MG350防火加纤50%，填充，低翘曲； 应用于高精密电子部件专用 Product Description Supplier YOUHUA Generic 液态聚合物 Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Shrinkage rate 0.07-0.52 % ASTM D955 Density 1.75 g/cm³ ASTM D792 hardness 98 R ASTM-D785 MECHANICAL…

About Exceptional strength and stiffness. Suitable for metal replacement applications. Electrically conductive. 30% carbon fiber reinforced. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant UL-Listing V-0 at 0.46mm thickness per UL 94 flame testing. Relative- Temperature-Index (RTI)…

About SUMIKASUPER® LCP E4006L is a Liquid Crystal Polymer (LCP) material filled with glass fiber. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of SUMIKASUPER® LCP E4006L are: Flame Rated Heat Resistant Low…

About SUMIKASUPER® LCP E6007LHF is a Liquid Crystal Polymer (LCP) material filled with glass fiber. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of SUMIKASUPER® LCP E6007LHF are: Flame Rated Good Processability Warp…

About Vectra® MT1345 VF3001 (natural) is a 30% mineral filled, easy flow LCP grade for injection molding. Vectra® MT1345 VF3001 (natural) is a special grade developed for medical industry applications and complies with: Food Contact Substance Notification (FCN) No. 742…

About Product Description Supplier UENO Generic 液态聚合物 Material Status Commercial: Active Technical Data Electrical performance Nominal value Unit Test method Tensile strength 216 Mpa ASTM D638 Dielectric strength 1 mm 47 kV/mm ASTM D149 PHYSICAL Nominal value Unit Test method…

About Best overall surface appearance with properties similar to A130. Less abrasive than glass fiber reinforced grades. Improved toughness over A130. Outstanding hydrolytic stability. Recommended where aesthetics are key. 30% mineral filled. Chemical abbreviation according to ISO 1043-1 : LCP…

About Product Description Supplier YOUHUA Generic 液态聚合物 Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Shrinkage rate 0.01-0.45 % ASTM D955 Density 1.62 g/cm³ ASTM D792 hardness 108 R ASTM-D785 MECHANICAL Nominal value…

About Zenite® 5145L is a 45% glass fiber reinforced and toughened liquid crystal polymer for injection molding. It has improved toughness.&& Product Description Supplier Celanese Generic 液态聚合物 Material Status Commercial: Active Features Good flexibility,Lubricating,V-0 Availabilitys North America,Asia Pacific,Europe Process Methods…

About SUMIKASUPER® LCP E5002L is a Liquid Crystal Polymer (LCP) material filled with glass fiber. It is available in Asia Pacific, Europe, or North America for injection molding. Primary attribute of SUMIKASUPER® LCP E5002L: Flame Rated.&& Product Description Supplier Sumitomo…

About Catalytically modified E820i Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant UL-Listing V-0 in natural at 1.5mm thickness per UL 94 flame testing. Relative-Temperature-Index (RTI) according to UL 746B: electrical 130°C, mechanical 130°C at 1.5mm. UL…

About LAPEROS® GA130 is a Liquid Crystal Polymer (LCP) product filled with 30% glass fiber. It is available in Asia Pacific. Characteristics include: Flame Rated High Flow&& Product Description Supplier Polyplastics Generic 液态聚合物 Material Status Commercial: Active Features V-0 Availabilitys…

About Zenite® 6140L is a 40% glass fiber reinforced and lubricated liquid crystal polymer for injection molding. It has excellent impact resistance and excellent heat deflection temperature.&& Product Description Supplier Celanese Generic 液态聚合物 Material Status Commercial: Active Features High impact…

About Product Description Supplier UENO Generic 液态聚合物 Material Status Commercial: Active Technical Data Electrical performance Nominal value Unit Test method Tensile strength 186 Mpa ASTM D638 Dielectric strength 1 mm 45 kV/mm ASTM D149 PHYSICAL Nominal value Unit Test method…

About Glass Fiber – UL94 V-0&& Product Description Generic 液态聚合物 Material Status Commercial: Negative Features V-0,5VA Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.75 g/cm³…

About Product Description Supplier UENO Generic 液态聚合物 Material Status Commercial: Active Technical Data Electrical performance Nominal value Unit Test method Tensile strength 170 Mpa ASTM D638 Dielectric strength 1 mm 45 kV/mm ASTM D149 PHYSICAL Nominal value Unit Test method…

About 35% glass and mineral reinforced grade. It offers excellent flowability, low warpage, excellent surface appearance, excellent dimensional stability, and good weldline strength. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant&& Product Description Supplier Celanese Generic 液态聚合物…

About Easy flowing grade with very good heat resistance, and mechanical properties. May reduce warpage in some parts compared to E130i. 50% glass reinforced. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant FDA compliant UL-Listing V-0 in…

About SUMIKASUPER LCP is a thermotropic liquid crystalline polyester, showing the highest heat resistance among engineering plastics.&& Product Description Supplier Sumitomo Generic 液态聚合物 Material Status Commercial: Active Features Good Rigidity,Excellent Processability,Good heat aging resistance,Good Dimensional Stability,Good liquidity,Low Viscosity,High Heat Resistance,Good…

About Product Description Supplier UENO Generic 液态聚合物 Material Status Commercial: Active Technical Data Electrical performance Nominal value Unit Test method Tensile strength 150 Mpa ASTM D638 Dielectric strength 1 mm 45 kV/mm ASTM D149 PHYSICAL Nominal value Unit Test method…