About LUTENE LB7500 is mainly intended for extrusion coating and can be processed uniform thickness and width. LUTENE LB7500 is also noted for the excellent heat stability and has good silicone coating processibility. LB7500 has a good adhesion strength with…
About 20 Melt, Prime Low Density Polyethylene, FDA Compliant&& Product Description Generic LDPE Material Status Commercial: Active Features ADCF,Food contact compliance,High Heat Resistance,Grease resistance Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 0.920 g/cm³ ASTM…
About Microthene G polyolefin powders are ground, irregularly-shaped particles for use in a broad range of specialty applications. Microthene G powders combine the unique properties of a polyolefin resin with a small ground particle size.&& Product Description Supplier LyondellBasell Generic…
About Product Description Supplier SINOPEC Shanghai Generic LDPE Material Status Commercial: Active Features Good surface appearance,Good Dimensional Stability,High liquidity,Quick molding cycle Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 0.924 g/cm³ GB/T1033-1985 Melt Flow Rate…
About MarFlex® 5428是一种低密度聚乙烯材料,。 该产品在北美洲或拉丁美洲有供货,加工方式为:薄膜挤出。 MarFlex® 5428的主要特性有: Antiblock 软件 滑动 透明度 典型应用领域包括: 电影 包袋/内衬&& Product Description Supplier Chevron Phillips Generic LDPE Material Status Commercial: Active Features Good Clarity,Smoothness,High anti-blocking,Low density Availabilitys North America,Latin America Process Methods Film extrusion Technical Data PHYSICAL…
About SUMIKATHENE® L405-H is a Low Density Polyethylene material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion. Important attributes of SUMIKATHENE® L405-H are: Heat Resistant Low to No Odor/Taste Typical…
About HP0823JN is a Low Density Polyethylene grade formulated with slip and antiblock additives. It typically exhibits good melt strength with good draw down ability. Films typically exhibit good toughness and good biaxial shrink properties Product Description Supplier SABIC Generic…
About SUMIKATHENE® G701 is a Low Density Polyethylene material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of SUMIKATHENE® G701: Good Processability.&& Product Description Supplier Sumitomo Generic…
About Polymer-E M5100 is a Low Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific. Typical application: Coating Applications. Primary characteristic: good processability.&& Product Description Supplier APC Generic LDPE Material Status Commercial: Negative…
About LDF2023S1 is a low density polyethylene which contains slip and antiblock additives. It has good optical properties and excellent processability. Applications: Bags and sacks, Shrink Film, Blown Film, Cast Film and Food Packaging Films. Process: Blown Film, Cast Film.&&…
About SABIC® LDPE 2801H0W offers high production output with very good optical properties, as well as good stiffness toughness balance. Application SABIC® LDPE 2801H0W is typically used for high clarity collation shrink films, glossy automatic packaging printed films and deep…
About SABIC® LDPE PCG00 SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG00 is an additive-free grade produced using SABIC’s proprietary high…
About SABIC® LDPE Powder 2102TP5 is an additive free standard CTR® tubular grade for masterbatch with a relatively low melt flow rate. This grade is supplied in powder form. Application SABIC® LDPE Powder 2102TP5 is a general medium sized powder…
About TAISOX® 6130F is a Low Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for blow molding. Important attributes of TAISOX® 6130F are: Good Aesthetics Low Shrinkage Rigid Typical applications include: Coating Applications Film&& Product…
About The oblate pellet product is colourless with excellent chemical stability. Under the normal conditions, the product is acid resistant, alkali resistant, and salt resistant. It possesses certain mechanical properties and light transmittance. Scope of Application: Light-duty / laminated film…
About IPETHENE® 323 is a low density polyethylene extrusion grade, produced by high pressure autoclave technology. This grade is particularly suitable for the production of blown & cast transparent thin films. It has excellent draw-down, good optical and processing properties.…
About DOW ENDURANCE™ HFDB-0586 BK S is a specially formulated semiconductive, vulcanizable compound designed for conductor shield and bonded insulation shield applications in medium and high voltage crosslinked polyethylene insulated cables.(1) DOW ENDURANCE™ HFDB-0586 BK S has stable volume resistivity…
About Purell PE 3020 K is a non-additivated, low density polyethylene with high rigidity, good opticals and good chemical resistance. It is delivered in pellet form. Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and…
About LD02520 is designed for heavy duty film applications. Superior puncture resistance combined with excellent impact properties make this resin an ideal choice for bags used to package fertilizer, peat moss, decorative stone and agricultural and construction materials. LD02520 has…
About Lupolen 3220 F is a non-additivated, low density polyethylene with high rigidity. It is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in…