About Lupolen 2421 K is an additivated, low density polyethylene. It contains an antioxidant and is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use…
About TASNEE LD 1925AS是一种熔体流动速率为1.9 g / 10min（190°C / 2.16kg）的低密度聚乙烯。主要用于收缩膜应用。 它含有滑爽剂和防粘连添加剂，具有合适的分子结构，可以生产出具有优异机械性能的薄膜.TASNEE LD 1925AS可以很容易地在所有类型的聚乙烯挤出机上加工。 建议熔体温度在160-190℃的范围内。 吹膜比为2：1，推荐膜厚范围为25至60μm。 典型应用： 包装袋，收缩膜，食品包装，表面保护。 产品特性 特点：防粘连滑爽添加剂，良好的光学性能，良好的加工性，低摩擦。 Product Description Generic LDPE Material Status Commercial: Active Features Alkali resistant,Food contact compliance,Acidproof,Good tear strength,Puncture Resistant,High shrinkage Availabilitys Asia Pacific Technical Data…
About InnoPlus LD2420D is produced by high pressure tubular process, a technology licensed by LyondellBasell. This grade offers easy processability, good balance of mechanical and optical properties. Film extruded from InnoPlus LD2420D has high tensile strength, elongation, good toughness and…
About This low density polyethylene is tailored for extrusion coating applications that require: Excellent processability Very high line speed at low coating weights Processability at lower extrusion temperature High temperature extrusion stability Excellent drawdown characteristics Low neck-in Typical extrusion coating…
About Polene LDPE MM 1018 is a Low Density Polyethylene material. It is available in Asia Pacific or North America for extrusion coating or laminating. Important attributes of Polene LDPE MM 1018 are: Good Adhesion Low to No Odor/Taste Typical…
About This low density polyethylene is tailored for extrusion coating applications that require: Excellent processability High line speed at low coating weights High temperature extrusion stability Good drawdown characteristics Low neck-in Typical extrusion coating applications may include: Food packaging Laminations…
About SABIC® LDPE 1965N0 is a fast flowing polymer for flexible articles where mechanical properties are not critical. The material has a typically low tendency to warp. This product is not intended for and must not be used in any…
About Lotrène® LDPE FB3003 is a Low Density Polyethylene product. It can be processed by blown film, extrusion, or film extrusion and is available in Africa & Middle East or Europe. Applications of Lotrène® LDPE FB3003 include agricultural, bags/liners, bottles,…
About SABIC® LDPE 2004CX3 is an Ultra Melt Strength (UMS) grade typically used in foam applications. Application SABIC® LDPE 2004CX3 can be typically used for all types of foam, produced with chemical blowing agents or physical gases, X-linked and non…
About Lupolen 2420 F is a non-additivated, low density polyethylene. It is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical…
About International grade: PE-M-18D022&& Product Description Generic LDPE Material Status Commercial: Active Availabilitys Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 0.919 g/cm³ ASTM D1505 Melt Flow Rate 2.0 g/10min ASTM D1238 MECHANICAL…
About Low Density Polyethylene for Pharmaceutical Blow Moulding Benefits & Features Eltex® MED PH27D630 is a LD-polyethylene produced in a high-pressure process intended for blow moulding of soft and flexible packages for pharmaceutical products. Eltex® MED PH27D630 is produced according…
About TASNEE LD 0725N是一种熔体流动速率为0.75 g / 10min（190°C / 2.16kg）的低密度聚乙烯。无添加剂，具有合适的分子结构，可以制成具有优异机械性能的薄膜。可以在为聚乙烯设计的所有类型的挤出机上轻松加工。 建议熔体温度在170-220℃的范围内。 该膜的优异性能是以2：1的吹胀比和推荐的膜厚范围从25至100μm实现的。 典型应用： 中型收缩包装，中型袋和袋，食品包装薄膜。 产品特性： 良好的薄膜强度，良好的光学性能，良好的加工性。 Product Description Generic LDPE Material Status Commercial: Active Features Alkali resistant,High impact resistance,Food contact compliance,Acidproof,Good tear strength,Puncture Resistant,High shrinkage Availabilitys Asia Pacific Technical Data PHYSICAL…
About SABIC® LDPE PCG09 SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG09 is an additive free grade, typically designed for healthcare…
About HANWHA LDPE 724 is manufactured by autoclave process and designed for variety of injection molding application such as artificial flower, lids etc. LDPE 724 is well known for its excellent processing characteristics and high quality assurance.&& Product Description Supplier…
About SABIC® LDPE PCG07 SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG07 is an additive free grade, typically designed for healthcare…
About PETLIN LD M022X is a low density polyethylene resin designed primarily for injection molding and masterbatch applications. It is produced by the state-of-the-art Clean Tubular Reactor production technology.&& Product Description Generic LDPE Material Status Commercial: Active Features Good surface…
About PAXOTHENE NA112-27 (LDPE) possesses low melt index and good toughness especially suitable for films with thickness of 0.020~0.100 mm. The said films are for package of shopping bags, frozen bags, re-closable bags and shrink packaging applications. NA112-27 is formulated…
About This autoclave, low density, ethylene homopolymer is tailored for blow molded applications that require: Good impact resistance Excellent flexibility Good clarity Good gloss No slip or antiblock Typical blow molded applications for 4538A include: Pharmaceutical bottles Squeeze bottles Flexible…
About SUMIKATHENE® F213-P is a Low Density Polyethylene material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application of SUMIKATHENE® F213-P: Film&& Product Description Supplier Sumitomo Generic LDPE Material Status Commercial:…