About LDF200YY is a low density polyethylene resin for film extrusion and is a barefoot grade. LDF200YY meets the U.S. Food and Drug Administration (FDA) criteria for food contact use as specified in 21 CFR 177.1520 (c) 2.1 & (c)…

About Aceso® PEM 2440 is a low density polyethylene made by a high pressure autoclave process without antioxidant. This grade is particularly suitable for the coating of paper, paperboard or aluminium as well as for the injection moulding process. Aceso®…

About CORENE® N2100 is a low density polyethylene resin designed for the production of medium/high voltage power cable insulation, blown film extrusion. ICORENE® N2100 is characterized by a good balance between processability, mechanical and optical properties.&& Product Description Generic LDPE…

About Modified&& Product Description Supplier Quadrant Generic LDPE Material Status Commercial: Active Features Machinable,HB Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 0.920 g/cm³ ASTM D792 Water absorption rate   ASTM D570 24hr < 0.010 %…

About Lupolen 2421 F is an additivated, low density polyethylene. It contains an antioxidant and is delivered in pellet form. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use…

About GOST / TU: GOST 16337-77 LDPE is produced by means of polymerization of ethyiene under high pressure in tubular or stirred reactorwith the use of radical type initiator. LDPE is used for manufacturing of pipes, fittings, articles contacting with…

About Microthene F polyolefin powders are ultra-fine, sperically shaped particles with narrow size distribution suitable for use in a broad range of specialty applications. Microthene F powders combine the unique properties of a polyolefin resin with a microfine particle size.&&…

About SUMIKATHENE® L405 is a Low Density Polyethylene material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion. Important attributes of SUMIKATHENE® L405 are: Heat Resistant Low Moisture Vapor Transmission Typical…

About LUTENE FB0800 is mainly intended for the extrusion of blown film with high mechanical property for the manufacture of greenhouse film. LUTENE FB0800 have the excellent mechanical properties and optical properties make suitable for manufacture of greenhouse films. LUTENE…

About Polifil ® RP-LDPE is a soft, tough material with good clarity and high chemical resistance. LDPE remains flexible and retains impact strength at very low temperatures. High melt flow (low viscosity) grades are injection molded into products such as…

About Main Features: high mechanical properties Main Applications: unidoses, multilayer films for blisters&& Product Description Generic LDPE Material Status Commercial: Active Features Low density Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test…

About Riblene FM 34 E is a low density polyethylene (LDPE), additivated with slip (erucamide) and antiblocking agent, suitable for blown film extrusion. Riblene FM 34 E is characterised by a good balance between processability, mechanical and optical properties. Films…

About PAXOTHENE NA205-15 (LDPE) is specially developed for extrusion coating on various substrates such as paper, cellophane, aluminum foil, polyolefin film, polyester film and nylon film. NA205-15 also possesses excellent adhesion to a variety of porous substrates such as paper…

About InnoPlus LD2426F is produced by high pressure tubular process, a technology licensed by LyondellBasell. This grade offers excellent processability for increased extruder outputs, good balance of mechanical and optical properties, exceptional clarity and gloss. Typical Applications : InnoPlus LD2426F…

About HANWHA LDPE 963 is manufactured by autoclave process and designed for variety of extrusion coating application such as paper and Tarpaulin coating etc. LDPE 963 is well known for its excellent processability and high quality assurance.&& Product Description Supplier…

About Good processability, high fluidity, flexibility and mechanical strength. It does not contain additives. Application: Injection molding and blends with EVA for foams.&& Product Description Supplier Braskem Generic LDPE Material Status Commercial: Active Features Good Rigidity,Excellent Processability,Good flexibility,High liquidity,Food contact…

About LDPE FE 8004 is a low density polyethylene produced by a high pressure autoclave process. LDPE FE 8004 is a slip and anti-block formulated grade, which is particularly suitable for transparent thin film. LDPE FE 8004 is suited to…

About Aceso® PEM 1870 is a low density polyethylene made by a high pressure autoclave process without antioxidant. This grade is particularly suitable for the coating of paper, paperboard or aluminium as well as for the injection moulding process. Aceso®…

About ALCUDIA® 2805F is a low density polyethylene grade, produced by high pressure autoclave technology, suitable for blown film applications. This material offers easy processability and an excellent balance of mechanical and optical properties. It contains antioxidant. TYPICAL APPLICATIONS Shrink…

About Product Description HP2022 series resins are Low Density Polyethylene grades suitable for general purpose packaging. They exhibit better draw down, good opticals and mechanical properties. Typical Applications Thin shrink film, lamination film, produce bags, textile packaging, soft goods packaging,…