About Lotrène® Q2018 Series are Linear Low Density Polyethylene resins produced in a gas phase reactor using butene (C4) co-monomer. They are designed for blown film applications and can be used in pure form as well as blended with other…
About QAMAR FC21HS is a Linear Low Density Polyethylene material. It is available in Africa & Middle East, Asia Pacific, Europe, or North America for blown film. Important attributes of QAMAR FC21HS are: Antiblock Clarity Slip Typical application of QAMAR…
About This concentrate was specially formulated to maintain the cost and performance balance and can be used in a broad range of applications such as blown film, thermoformed sheet, and injection molding. Suitable Applications: blown film thermoformed sheet injection molding…
About LINATHENE LL120C is a butene linear low density polyethylene(LLDPE) developed for slot cast film extrusion. Films made from LINATHENE LL120C have excellent toughness, tensile strength, elongation, puncture strength and transparency. LINATHENE LL120C is recommended for the manufacture of stretch…
About UF414 is manufactured by Unipol process technology. UF414 has good mechanical properties and good processability.&& Product Description Supplier LOTTE Generic Linear low density polyethylene Material Status Commercial: Active Features Excellent Processability,Smoothness,High anti-blocking,Inoxidizability Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL…
About Product Description Generic Linear low density polyethylene Material Status Commercial: Active Features Good flexibility,Smoothness,High anti-blocking,Machinable,Good Tensile Strength,Low density,Butylene copolymer,Puncture Resistant Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 0.920 g/cm³ ASTM D792 Melt Flow Rate…
About M3804RW and Marvel M10 are linear-low density polyethylene (LLDPE) for rotational molding applications. M10 is a color compounded form, With a balance of impact properties, stiffness, and processability. Both of them are suitable for rotational molding of storage tanks…
About UF317 is manufactured by Unipol process technology. UF317 has good mechanical properties, excellent optical properties and good processability.&& Product Description Supplier LOTTE Generic Linear low density polyethylene Material Status Commercial: Active Features Excellent Processability,Smoothness,Optical performance,High anti-blocking,Inoxidizability Availabilitys North America,Asia…
About EVALENE ® LF20184 is specifically formulated for best performance in thicker films (=50 microns; =0.002″). EVALENE ® LF20184 is suitable for both the lamination and core layers in coextruded films. Films made of EVALENE ® LF20184 are notable for…
About Petrothene GA574200 exhibits excellent flow and impact with good stiffness. Typical applications include lids, closures, containers, housewares and medical items. Without exception, all potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be…
About AXELERON™ GP 6059 BK CPD is a prime quality telephone cable black jacketing compound (“CPD”). It offers improved low temperature and high temperature performance plus excellent environmental stress-cracking resistance, outdoor weatherability, and toughness. Specifications AXELERON™ GP 6059 BK CPD…
About ICORENE® 1060 ESF (Enhanced surface Finish) is a polyethylene specifically developed for rotational moulding. This grade is a specialised grade designed to remove the surface pinholes during processing for applications such hygenic, medical, furniture and design applications.&& Product Description…
About Product Description Generic Linear low density polyethylene Material Status Commercial: Active Features Good flexibility,Smoothness,High anti-blocking,Machinable,Good Tensile Strength,Low density,Butylene copolymer,Puncture Resistant Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 0.920 g/cm³ ASTM D792 Melt Flow Rate…
About Linear Low Density Polyethylene Outstanding tear strength, impact strength and toughness For high performance cast film applications Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a. Complies with Canadian HPFB No Objection (With Limitations) Complies with U.S. FDA-DMF Complies…
About Aramco LLDPE F2122是线性低密度聚乙烯树脂，通常用于流延薄膜应用。 由这种树脂制成的薄膜通常表现出优异的光学性能和良好的拉伸性能。 该产品通常也适合用作电缆混合中的基础树脂。 本产品不含防滑剂和防粘剂。 典型应用 手和托盘拉伸包装，用于复合电缆护套和低压电缆绝缘的基础树脂。 本产品不适用于医疗和制药应用。 Product Description Supplier Aramco Generic Linear low density polyethylene Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt index 2.2 g/10min ASTM D1238 Density 0.921 g/cm³…
About EFDC-7050 is a linear low-density polyethylene (LLDPE) resin for tubular blown film extrusion. Films extruded from EFDC-7050 have good toughness and high tensile strength and puncture resistance. The product offers excellent draw down capability for making thinner gauge films.…
About Asrene® UI 2650 is a Linear Low Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of Asrene® UI 2650 include caps/lids/closures, additive/masterbatch, coating applications and consumer…
About CEFOR 1220P is a butene Linear Low Density Polyethylene for general blown film extrusion film applications. Main Characteristics: Used in Industrial, Food & Specialty Packaging Better optics and processability Better color stability Complies with: U.S. FDA 21 177.1520 (c)…
About Evolue™ SP3010 is a Linear Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific, Europe, or North America. Applications of Evolue™ SP3010 include bags/liners and film. Characteristics include: Fast Molding Cycle…
About POLYCOMPO PE SP0540 is a Linear Low Density Polyethylene product. It can be processed by cast film and is available in Asia Pacific. Typical application: Film.&& Product Description Supplier POLYCOMPO Generic Linear low density polyethylene Material Status Commercial: Active…