About VESTAMID®Care ML grades cover a range of polyamide 12 resins of different viscosity for processing via extrusion or injection molding. The VESTAMID®Care ML product range consists of unstabilized base resins as well as stabilized or reinforced compounds. VESTAMID® Care…
About Reinforced, filled and flame-retardant VESTAMID® polyamide 12 compounds Characterization: 15% chopped strands, medium viscosity, heat stabilized with processing aid Applications: gear box housing for electrical car window lifters In general, it can be said that long-chain, semi-crystalline polyamides absorb…
About Polyamide 12 fluidized bed coating powder VESTOSINT 1111 colored is a polyamide 12 powder suitable for all-purpose fluidized bed coating.&& Product Description Supplier Evonik Generic PA12 Material Status Commercial: Active Availabilitys North America,Europe Technical Data PHYSICAL Nominal value Unit…
About Powder for coating systems VESTOSINT 1164 white respectively 1174 white are nylon 12 fine powders which are specially developed for the minicoat process of small articles, e.g. corsetry or ferrit rings. VESTOSINT 1164 white and 1174 white are used…
About Grilamid® L 20A HL NZ nat is a Polyamide 12 (Nylon 12) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion or injection molding. Important attributes of Grilamid® L…
About By selecting specific monomers, one can achieve a crystallizable and permanently transparent polyamide: TROGAMID® CX. The crystallites are so small that they do not scatter visible light, and the material appears transparent to the human eye—a property known as…
About Grilamid® LKN-5H is a Polyamide 12 (Nylon 12) material filled with 50% glass bead. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of Grilamid® LKN-5H are:…
About Grilamid® LV-30H FWA nat is a Polyamide 12 (Nylon 12) material filled with 30% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of Grilamid®…
About Product Description Generic PA12 Material Status Commercial: Active Features High impact resistance,Ultra high toughness,Solvent resistance Availabilitys Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 23℃ 1.03 g/cm³ GB/T1033-1986 Water absorption rate 24…
About Reinforced, filled and flame-retardant VESTAMID® polyamide 12 compounds Characterization: low viscosity, with flame retardant, halogen and phosphorus-free, UL94-V0/V2, with processing aid Applications: wire insulation In general, it can be said that long-chain, semi-crystalline polyamides absorb little water, are resistant…
About Powder for fluidized bed coating, minicoat and liquid coating and composites VESTOSINT 2157 is a polyamide 12 fine powder for the use in liquid coating systems. It is used as an additive for instance in coil coating systems, to…
About Grilamid® L 20 nat is a Polyamide 12 (Nylon 12) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for cast film, extrusion, film extrusion, or injection molding. Important attributes of…
About VESTAMID®Care ML grades cover a range of polyamide 12 resins of different viscosity for processing via extrusion or injection molding. The VESTAMID®Care ML product range consists of unstabilized base resins as well as stabilized or reinforced compounds. VESTAMID® Care…
About Grilamid® L 25 LM is a Polyamide 12 (Nylon 12) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion. Important attributes of Grilamid® L 25 LM are: Flame Rated…
About VESTAMID®Care ML grades cover a range of polyamide 12 resins of different viscosity for processing via extrusion or injection molding. The VESTAMID®Care ML product range consists of unstabilized base resins as well as stabilized or reinforced compounds. VESTAMID® Care…
About PrimePart® PLUS (PA 2221) is a refresh optimised polyamide 12 powder for processing in laser sintering systems. Therefore the need for new powder is considerably reduced, making PrimePart® PLUS economically very attractive. Laser sintered parts from PrimePart® PLUS are…
About Grilamid® XE 3997 nat is a Polyamide 12 (Nylon 12) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for blow molding, extrusion, or injection stretch blow molding. Important attributes of…
About Grilamid® L 25A NZ是一种聚酰胺12（尼龙12）材料,。 该产品在北美洲、非洲和中东、拉丁美洲、欧洲或亚太地区有供货,加工方式为:挤出或注射成型。 Grilamid® L 25A NZ的主要特性有: 阻燃/额定火焰 通过 ROHS 认证 高粘度 耐冲击 典型应用领域包括: 汽车行业 电气/电子应用 电线电缆 工业应用 软管&& Product Description Supplier EMS-GRIVORY Generic PA12 Material Status Commercial: Active Features High impact resistance,High Viscosity,Hydrolysis stability Availabilitys Africa…
About Product Description Supplier EMS-GRIVORY Generic PA12 Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About Grilamid® LV-50H FWA nat是一种聚酰胺12（尼龙12）材料,含有的填充物为50% 玻璃纤维增强材料。 该产品在北美洲、非洲和中东、拉丁美洲、欧洲或亚太地区有供货,加工方式为:注射成型。 Grilamid® LV-50H FWA nat的主要特性有: 阻燃/额定火焰 通过 ROHS 认证 可接触食品 热稳定剂 典型应用领域包括: 水管/管道/饮用水 食品接触应用 工业应用 家庭应用 生活消费品&& Product Description Supplier EMS-GRIVORY Generic PA12 Material Status Commercial: Active Features Hydrolysis stability,Food contact compliance,Heat Stabilized Availabilitys…