About (ECONAMID 6ST1) Polyamide 6, impact modified, for injection moulding&& Product Description Supplier DOMO Generic PA6 Material Status Commercial: Active Features High impact resistance Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method…
About ALTECH® PA6 A 2025/109 GF25 is a Polyamide 6 (Nylon 6) product filled with 25% glass fiber. It is available in Asia Pacific, Europe, or North America. Characteristics include: Flame Rated RoHS Compliant Fast Molding Cycle Heat Resistant&& Product…
About ARMAMID® PA HC 10 is a Polyamide 6 (Nylon 6) product. It is available in Europe.&& Product Description Generic PA6 Material Status Commercial: Active Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.17 g/cm³ Shrinkage rate…
About Promyde B35 P is a high viscosity Polyamide 6, heat stabilised, nucleated and lubricated. APPLICATIONS Promyde B35 P provides a more resilient alternative to standard viscosity polyamide 6 for the use in applications such as wheels for child push…
About Medium viscosity Polyamide 6, 30% glass fiber reinforced, nanomodified. For moulding parts with high stiffness and good impact resistance.&& Product Description Supplier TER Generic PA6 Material Status Commercial: Active Features Good Rigidity,High impact resistance Availabilitys Europe Process Methods Injection…
About Firestone C212-15C is a Polyamide 6 (Nylon 6) material. It is available in North America for extrusion. Important attributes of Firestone C212-15C are: Heat Stabilizer Lubricated Typical application of Firestone C212-15C: Wire & Cable&& Product Description Generic PA6 Material…
About TECHNYL® C 206F Natural (R) is an unreinforced polyamide PA6, standard for fast injection cycles, for injection moulding. This grade has high fluidity and a good mould release.&& Product Description Supplier DOMO Generic PA6 Material Status Commercial: Negative Features…
About It is 20% mineral reinforced polyamide 6 compound, heat stabilised.&& Product Description Generic PA6 Material Status Commercial: Active Features Heat Stabilized,HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value…
About Product Description Generic PA6 Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.25 g/cm³ ASTM D792 Forming shrinkage rate 1.0-1.5 % ASTM D955 THERMAL Nominal value Unit Test method Hot deformation temperature 1.82Mpa 68…
About PA6 mineral filled 40%, very good dimensional stability, uniform shrinkage in all directions, good surface finish and good mechanical and thermal properties. Available: all colors, UV-stabilized (L), heat-stabilized (H), release agent (W).&& Product Description Generic PA6 Material Status Commercial:…
About Product Description Supplier SH shenma Generic PA6 Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.36 g/cm³ ISO 1183 Shrinkage rate 0.5-1.2 % ISO 294/4 MECHANICAL Nominal value Unit Test method tensile strength 100…
About Product Description Generic PA6 Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com.…
About Polyamide 6 – Mineral Filled, 15% Automotive: Lighting Parts including Head lamp/Tail lamp, Interior Parts Electrical & Electronic: Switch Parts, Lighting, Power connectors&& Product Description Generic PA6 Material Status Commercial: Negative Features Good stripping performance,Good stability,HB Availabilitys North America,Asia…
About High impact resistant&& Product Description Supplier UBE Generic PA6 Material Status Commercial: Active Features High impact resistance Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.07 g/cm³ ISO 1183…
About Product Description Supplier SH shenma Generic PA6 Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.56 g/cm³ ISO 1183 Shrinkage rate 0.3-0.8 % ISO 294/4 MECHANICAL Nominal value Unit Test method tensile strength 220…
About Toughened Polyamide 6&& Product Description Supplier DuPont Generic PA6 Material Status Commercial: Active Features Heat Stabilized Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Film extrusion Technical Data MECHANICAL Nominal value Unit Test method Tensile modulus…
About TECHNYL® C 216 V30 Blue 2234CF is a polyamide 6, reinforced with 30% of glass fibre, for injection moulding. This grade has good mechanical properties and offering an excellent combination between thermal and mechanical properties.&& Product Description Supplier DOMO…
About Prime Nylon 6, 30% Glass Reinforced, Natural Compound.&& Product Description Generic PA6 Material Status Commercial: Active Features HB Availabilitys Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.36 g/cm³ ISO 1183 Shrinkage rate…
About ARMAMID® PA 6-3EK is a Polyamide 6 (Nylon 6) product. It can be processed by extrusion and is available in Europe.&& Product Description Generic PA6 Material Status Commercial: Active Features High elastic Availabilitys Europe Process Methods Extrusion Technical Data…
About PA6 30% glass fiber and mineral filler reinforced injection moulding grade. Heat stabilized. Natural colour. Suitable for parts requiring improved stiffness and dimensional stability, reduced shrinkage and low warpage.&& Product Description Supplier Radici Generic PA6 Material Status Commercial: Active…