About PA 6 for injection moulding, chemically reinforced with 30% glass fibre, with nonhalogen flame retardant. Main features: flammability in accordance with UL 94 V0 at 1.6 mm, glow wire at 960°C, CTI 500. Application for the electrical industry: protectors,…
About (ECONAMID 6FLH) Polyamide 6, heat stabilized, for injection moulding&& Product Description Supplier DOMO Generic PA6 Material Status Commercial: Active Features Heat Stabilized Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density…
About Tislamid® PA6 PA6 30 GBR is a Polyamide 6 (Nylon 6) material filled with 30% glass bead. It is available in Africa & Middle East or Europe for injection molding. Primary attribute of Tislamid® PA6 PA6 30 GBR: Flame…
About Medium viscosity polyamide 6 with 30% glass fibre reinforcement. For moulding parts with high rigidity and good impact strength.&& Product Description Supplier TER Generic PA6 Material Status Commercial: Active Features Good Rigidity,High impact resistance Availabilitys Europe Process Methods Injection…
About LubriOne™ Lubricated and Wear-Resistant Compounds have been specifically formulated to be self-lubricating materials, offering low coefficient of friction and improved wear resistance properties. LubriOne compounds have been demonstrated to reduce friction, noise, vibration, heat buildup and improve product durability.&&…
About TECHNYL® C 236SI V30 Natural is a polyamide 6 reinforced with 30% of glass fiber, with improved impact resistance, for injection moulding. This grade offers high impact strength and good mechanical properties.&& Product Description Supplier DOMO Generic PA6 Material…
About Kingfa PA6-G35 HSNC101 is a Polyamide 6 (Nylon 6) material filled with 35% glass fiber. It is available in Asia Pacific or North America for injection molding. Important attributes of Kingfa PA6-G35 HSNC101 are: Flame Rated Good Aesthetics Good…
About Durethan® BKV 30 N1 000000 (干燥 ) PA 6, 30 % glass fibers, injection molding, flame retardant&&Durethan® BKV 30 N1 000000 PA 6, 30 % glass fibers, injection molding, flame retardant&& Product Description Supplier LANXESS Generic PA6…
About GERMAMID 6 EX is a Polyamide 6 (Nylon 6) material. It is available in Europe for extrusion.&& Product Description Generic PA6 Material Status Commercial: Active Availabilitys Europe Process Methods Extrusion Technical Data PHYSICAL Nominal value Unit Test method Density…
About Nylon 6, 15% Mineral / 15% Glass Filled&& Product Description Generic PA6 Material Status Commercial: Active Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 1.36 g/cm³ ISO 1183 Shrinkage rate MD：3.2 mm 0.30 to 0.60…
About Polyamide 6, reinforced with 40% of glass fiber, heat stabilized, lubricated for injection moulding. Eplamid 6 GFR 40 is used in all sectors of industry, offering a perfect balance of thermal and mechanical properties. This material is available in…
About High mechanical strength and stiffness High thermal stability High toughness at low temperatures Excellent sliding friction behavior Optimal flow characteristics for challenging applications Suitable for low-warpage injection molding parts Also “cross-linkable” available Typical Applications Automotive: Radiator grills, exterior door…
About Thermal conductive material, Flame Retardant, Heat Stabilized&& Product Description Supplier DSM Generic PA6 Material Status Commercial: Active Features Flame Characteristics,Thermal conductivity,Heat Stabilized Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal…
About Grilon® EB 50 H is a Polyamide 6 (Nylon 6) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for blow molding or extrusion. Important attributes of Grilon® EB 50 H…
About TECAST™ cast nylon, available in a variety of grades, offers a combination of good mechanical properties, excellent bearing and wear characteristics, and the large-size capabilities of the casting process. Its fatigue resistance, noise damping ability, corrosion resistance, and light…
About 6016178 Product Description Supplier Polyone Generic PA6 Material Status Commercial: Active Features Good Rigidity,Good surface appearance Availabilitys Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.36 g/cm³ ISO 1183 MECHANICAL Nominal value…
About 15% Glass Reinforced, Heat Stabilized, Polyamide 6&& Product Description Supplier DuPont Generic PA6 Material Status Commercial: Active Features Heat Stabilized Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data MECHANICAL Nominal value Unit Test method Tensile modulus…
About LIHAN® B801 is a Polyamide 6 (Nylon 6) product. It can be processed by injection molding and is available in Asia Pacific. Primary characteristic: flame rated.&& Product Description Supplier Lihan Generic PA6 Material Status Commercial: Active Availabilitys Asia Pacific…
About 4MID 9B21030 H is a Standard Flow 30% Mineral Filled Heat Stabilised PA6&& Product Description Generic PA6 Material Status Commercial: Active Features Heat Stabilized,HB Availabilitys Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density…
About TECHNYL® C 52G4 MZ25 Grey R7035 is a polyamide 6 based on a non-phosphorous and Non-halogenated flame retardant system, reinforced with 25% of mineral filler, heat stabilized, for injection moulding. This grade offers a robust glow wire resistance, combined…