About Polyamide 6 reinforced with 30% glass fibre; flame retardant as per UL 94 V0 at 1.6 mm rating&& Product Description Generic PA6 Material Status Commercial: Active Features Flame Characteristics,V-0 Availabilitys Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal…

About HiFill® PA6 GF35 LE is a Polyamide 6 (Nylon 6) product filled with 35% glass fiber. It can be processed by injection molding and is available in North America. Typical application: Food Contact Applications. Characteristics include: Flame Rated Lubricated&&…

About TECAST™ cast nylon, available in a variety of grades, offers a combination of good mechanical properties, excellent bearing and wear characteristics, and the large-size capabilities of the casting process. Its fatigue resistance, noise damping ability, corrosion resistance, and light…

About Filled Nylon Compound are manufactured by compounding nylon 6 with specially treated chopped glass and modified with additives to make the compound suitable for high mechanical properties, and heat resistance. Good Weathering resistance Excellent chemical resistance. Easy processibility. Fast…

About Only NYLOIL from CAST NYLONS LIMITED offers three grades of self-lubricating Nylon bearing material tailored to meet your specific application. A cast nylon with built-in oil lubrication, NYLOIL provides superior machinability, performance, and durability compared to other plastic and…

About Durethan®   BKV230H3.0 000000 (Dry) PA 6-Copolymer, 30 % glass fibers, injection molding, improved impact strength, heat-aging stabilized&&Durethan®   BKV230H3.0 000000 PA 6-Copolymer, 30 % glass fibers, injection molding, improved impact strength, heat-aging stabilized&&Durethan®   BKV230H3.0 000000 PA 6-Copolymer,…

About HiFill® PA6 GF50 LE is a Polyamide 6 (Nylon 6) product filled with 50% glass fiber. It can be processed by injection molding and is available in North America. Typical application: Food Contact Applications. Primary characteristic: lubricated.&& Product Description…

About TECHNYL® C 52G2 MV25 Grey G 1783 CF is a polyamide 6 based on a non-phosphorous and Non-halogenated flame retardant system, reinforced with 25% of mixed glass fibre and mineral filler, heat stabilized, for injection moulding. This flame retardant…

About Amilan® U141 is a Polyamide 6 (Nylon 6) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: impact resistant.&& Product Description Supplier Toray Generic PA6 Material Status Commercial: Active Features High impact resistance Availabilitys Asia…

About Bergamid™ B65 G/Mi20 UF is a Polyamide 6 (Nylon 6) product filled with 20% glassmineral. It is available in Africa & Middle East, Asia Pacific, or Europe. Characteristics include: Flame Rated RoHS Compliant Flame Retardant Halogen Free&& Product Description…

About Electrafil® PA6 GF20 is a Polyamide 6 (Nylon 6) product filled with filler and 20% glass fiber. It can be processed by injection molding and is available in North America. Characteristics include: Flame Rated Conductive Lubricated&& Product Description Generic…

About Product Description Supplier SH shenma Generic PA6 Material Status Commercial: Active Features Hydrolysis stability Technical Data PHYSICAL Nominal value Unit Test method Density 1.41 g/cm³ ISO 1183 Shrinkage rate 0.3-0.9 % ISO 294/4 MECHANICAL Nominal value Unit Test method…

About Ultramid B3GM35 BKQ649 23220 is a 40% combined glass-fiber and mineral reinforced, pigmented balck injection molding PA6 grade. Applications Typical applications include industrial articles requiring medium rigidity and high dimensional stability.&& Product Description Supplier BASF Generic PA6 Material Status…

About Durethan®   B40F 000000 (Dry) PA 6, non-reinforced, extrusion, high viscosity, no additives, suitable for food-contact&&Durethan®   B40F 000000 PA 6, non-reinforced, extrusion, high viscosity, no additives, suitable for food-contact&&Durethan®   B40F 000000 PA 6, non-reinforced, extrusion, high viscosity,…

About Mineral / Glass Reinforced Nylon Resin (PA6)&& Product Description Supplier Wellman Generic PA6 Material Status Commercial: Active Availabilitys North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.50 g/cm³ ISO 1183 Shrinkage rate   ISO…

About (DOMAMID 6G20ST1UV) Polyamide 6, 20% glass fiber reinforced, improved impact resistance, UV stabilized, for injection moulding.&& Product Description Supplier DOMO Generic PA6 Material Status Commercial: Active Features Weather resistance is good,High impact resistance Availabilitys North America,Asia Pacific,Europe Process Methods…

About Product Description Generic PA6 Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Shrinkage rate 1.2 / 1.5 % ISO 294-4 Density 1.05 g/cm³ ISO 1183 MECHANICAL Nominal value Unit Test method 105 ISO 2039/2 bending…

About NYCOA GR30 V0 is a 30% glass fiber reinforced, flame retardant Nylon 6 resin used for injection molding. This resin complies with ROHS requirements, as it contains a non-halogenated flame retardant package. NYCOA GR30 V0 is listed by Underwriters…

About Since its introduction in 1938, Nylon has become one of the world’s most widely recognized and utilized engineering grade thermoplastics. Nylon’s unique combination of high strength, good toughness, outstanding chemical resistance, and excellent wear and abrasion resistance have made…

About Ultramid B27 N 02 is a light stabilized polyamide 6 grade for the production of bright textiles and carpet fibers.&& Product Description Supplier BASF Generic PA6 Material Status Commercial: Active Features Weather resistance is good,Grease resistance Availabilitys North America…