About ALTECH® PA6 A 2030/109 GF30 BK1132-07LS is a Polyamide 6 (Nylon 6) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application: Housings. Characteristics include: Flame Rated RoHS Compliant Fast Molding…
About 50% Glass Reinforced, High Flow Special Features: Good or high flow Akulon® is our family of high performance polyamide 6 and polyamide 66 materials, used by customers across the world in applications ranging from automotive, electronics & electrical, to…
About (DOMAMID A1-002-V15-B) Polyamide 6, 15% glass fiber reinforced, for injection moulding, black&& Product Description Supplier DOMO Generic PA6 Material Status Commercial: Active Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density…
About Film Extrusion, High Viscosity&& Product Description Supplier DSM Generic PA6 Material Status Commercial: Active Features High Viscosity Availabilitys Europe Process Methods Film extrusion Technical Data MECHANICAL Nominal value Unit Test method friction coefficient ISO 8295 Dynamic, cast thin…
About Promyde B30 P2 U0 is a UL certified unfilled injection moulding Polyamide 6 flame retardant (Halogen free), heat stabilized. CHARACTERISTICS Promyde B30 P2 U0 is a polyamide 6 with high mechanical strength, heat stabilized, lubricated and nucleated for injection…
About Product Description Supplier Daicel Generic PA6 Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 23 ℃, in water 1.35 g/cm³ ASTM D792 Shrinkage rate Contest Lufa 0.1~0.5 % ash content 800℃ 30 % D5630…
About Durethan® B 31 SK 000000 (干燥 ) PA 6, non-reinforced, injection molding&&Durethan® B 31 SK 000000 PA 6, non-reinforced, injection molding&& Product Description Supplier LANXESS Generic PA6 Material Status Commercial: Active Features V-2 Availabilitys Africa & Middle…
About UNITIKA Nylon 6 A1030GFL is a Polyamide 6 (Nylon 6) material filled with 30% glass fabric. It is available in Asia Pacific or North America. Primary attribute of UNITIKA Nylon 6 A1030GFL: Flame Rated. Typical applications include: Automotive Construction…
About ADDINYL® B2 G30 is a Polyamide 6 (Nylon 6) material filled with 30% glass bead. It is available in Africa & Middle East, Asia Pacific, Europe, or Latin America. Important attributes of ADDINYL® B2 G30 are: Good Dimensional Stability…
About 6016178&& Product Description Supplier Polyone Generic PA6 Material Status Commercial: Active Features Good Rigidity,Good surface appearance,Good Dimensional Stability,Halogen free,Flame Characteristics,V-0 Availabilitys Africa & Middle East ,North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test…
About Product Description Supplier SH shenma Generic PA6 Material Status Commercial: Active Features Glass fiber reinforced toughening Technical Data PHYSICAL Nominal value Unit Test method Density 1.33 g/cm³ ISO 1183 Shrinkage rate 0.2-0.7 % ISO 294/4 MECHANICAL Nominal value Unit…
About Staramide BST03 is an Impact Modified Polyamide 6 Injection Molding Resin&& Product Description Generic PA6 Material Status Commercial: Active Features High impact resistance,HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL…
About Promyde B30 P2 G30 MI is a Polyamide 6 injection moulding grade with 30% glass fibre, impact modified and heat stabilized. CHARACTERISTICS This material is distinguished by high mechanical strength and impact resistance. Parts made from Promyde B30 P2…
About High thermal conductivity product based on Polyamide 6 (PA6). Glass fibres / Mineral filler. UL94 V-0 classified, free of halogens-based flame retardants and red phosphorous.&& Product Description Supplier LATI Generic PA6 Material Status Commercial: Active Features Halogen free,Low to…
About FRIANYL® B3 GF30 V0XI is a Polyamide 6 (Nylon 6) compound, 30% glass fiber reinforced, flame retardant with halogens, free from PBB and PBDE, UL listed V0. This compound is intended for injection molding. FRIANYL® B3 GF30 V0XI is…
About ALCOM® PA6 900 GF10 MR20是一种聚酰胺6（尼龙6）产品,含有的填充物为10% 玻璃纤维增强材料 和 20% 矿物填料。 它可以通过注射成型进行加工,在亚太地区、北美洲或欧洲有供货。 ALCOM® PA6 900 GF10 MR20的应用领域包括工程/工业配件、房屋 和 汽车行业。 特性包括: 符合 REACH 标准 通过 ROHS 认证 抗翘曲 热稳定剂 美观&& Product Description Supplier ALBIS Generic PA6 Material Status Commercial: Active Features Low…
About Grilon® XE 5051 (BGZ-40 FC) is a Polyamide 6 (Nylon 6) material filled with 40% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of…
About ADDINYL® B2 E is a Polyamide 6 (Nylon 6) material. It is available in Africa & Middle East, Asia Pacific, Europe, or Latin America. Important attributes of ADDINYL® B2 E are: Flame Rated Flame Retardant Halogen Free Typical applications…
About 45% long glass fiber reinforced polyamide 6. High Stiffness & superior mechanical balanced.&& Product Description Generic PA6 Material Status Commercial: Active Features Good Rigidity,HB Availabilitys Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method…
About Descriptions: DESLON™ DSC124GM is one of the brands which made by Polyamide6 that filled Glass Fiber & Mineral Filler 40%. It provides good mechanical property and heat resistance property. Applications: DESLON™ DSC124GM is one of the most-used resin for…