About Novamid®是高质量的聚酰胺，这条特殊的生产线主要是为满足日本客户的要求而设立的。Novamid®应用地域广，行业宽，种类多。从汽车到包装，Novamid®背后都有经验丰富的专家队伍进行支持。 Product Description Supplier DSM Generic PA6 Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.54 g/cm³ ISO 1183 Shrinkage rate TD 0.3 % ISO 294-4 Shrinkage rate MD 1.1 % ISO 294-4 MECHANICAL…
About Ultramid B3S FC R01 is a general purpose, PA6 resin for injection molding. Applications Intended for food contact applications&& Product Description Supplier BASF Generic PA6 Material Status Commercial: Active Features Food contact compliance Availabilitys North America Process Methods Injection…
About Product Description Supplier SH shenma Generic PA6 Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.14 g/cm³ ISO 1183 Shrinkage rate 1.4-2.0 % ISO 294/4 MECHANICAL Nominal value Unit Test method tensile strength 80…
About Product Description Supplier DOMO Generic PA6 Material Status Commercial: Active Features Heat Stabilized,Ductility,High Viscosity Availabilitys Europe,Africa & Middle East Technical Data MECHANICAL Nominal value Unit Test method Tensile modulus 1830 MPa ISO 527-2/1A tensile strength ISO 527-2/1A yield 46.0…
About Glass Sphere Reinforced Nylon Resin (PA6)&& Product Description Supplier Wellman Generic PA6 Material Status Commercial: Active Features HB Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.44 g/cm³ ISO…
About Product Description Supplier Radici Generic PA6 Material Status Commercial: Active Features Lubricating,Heat Stabilized,V-2 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.14 g/cm³ ISO 1183 Water absorption rate Saturation,…
About Grilon® BGZ-30/2 is a Polyamide 6 (Nylon 6) material filled with 30% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of Grilon® BGZ-30/2 are:…
About (DOMAMID 6G30UV) Polyamide 6, 30% glass fiber reinforced, UV stabilized, for injection moulding&& Product Description Supplier DOMO Generic PA6 Material Status Commercial: Active Features Weather resistance is good Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL…
About 40% Mineral/Glass-Reinforced Nylon Resin (PA6)&& Product Description Supplier Wellman Generic PA6 Material Status Commercial: Active Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.50 g/cm³ ISO 1183 Shrinkage rate…
About Descriptions: DESLON™ DSC102G6 is one of the brands which made by Polyamide6 that filled Glass Fiber 30% and reinforces goods. It provides good mechanical property, excellent injection molding property and fluidity property. Applications:DESLON™ DSC102G6 is one of the most-used…
About Ultramid 8233G HS BK-106 is a heat stabilized, weather resistant, 33% glass fiber reinforced PA6 injection molding compound offering excellent strength, stiffness, high temperature performance and dimensional stability. This balance of engineering properties in combination with excellent processability make…
About Kepamid 1525SM3 is mineral filler 25% reinforced and impact modified polyamide-6. Good thermal property and impact strength with low warpage. It is applicable to automotive, electrical, electronic, and industrial parts.&& Product Description Supplier Korea Engineering Generic PA6 Material Status…
About NYLOY® KF-0030N 311WT is a Polyamide 6 (Nylon 6) material. It is available in Asia Pacific or North America. Primary attribute of NYLOY® KF-0030N 311WT: Flame Rated.&& Product Description Supplier Nytex Generic PA6 Material Status Commercial: Negative Features V-0…
About Description PA6 Mineral Reinforced Filled Black Compound Product Applications Automotive Industries, power train/Engine Such as Engine hood, wheel cover, Lamp housing etc Benefits Good Dimensional stability and low warpage&& Product Description Generic PA6 Material Status Commercial: Active Features Low…
About Kingfa PA6-C100 is a Polyamide 6 (Nylon 6) material. It is available in Asia Pacific or North America for injection molding. Primary attribute of Kingfa PA6-C100: Flame Rated. Typical applications include: Appliances Electrical/Electronic Applications&& Product Description Supplier Kingfa Generic…
About 聚合物、热塑性塑料、尼龙、尼龙610、尼龙610、玻璃增强30%,干燥 Product Description Supplier BASF Generic PA6 Material Status Commercial: Active Features Corrosion Resistant Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.31 g/cm³ ISO 1183 Water absorption rate 2.0 – 2.6 % ISO 62 Balanced…
About High Viscosity, Lubricated&& Product Description Supplier DSM Generic PA6 Material Status Commercial: Active Features High Viscosity,Lubricating,HB Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.13 g/cm³ ISO 1183 Water absorption rate Saturation, 23 ℃ 9.5 %…
About TECHNYL STAR® S 218 V35 Natural is based on a patented high flow polyamide 6 resin (TechnylStar), heat stabilized, reinforced with 35% of glass fibre, for injection moulding. Due to its outstanding flow caracteristics, this grade provides a significant…
About This is a black colored cast nylon type 6 that exhibits more UV resistance than TECAST® T Natural, and is therefore much better suited for outdoor applications than our other standard grade formulations. The material has good wear and…
About Ultramid B3Z is an impact-modified, unreinforced PA6 for injection molding. Applications Typical applications include impact-resistant articles, e.g.dowels.&& Product Description Supplier BASF Generic PA6 Material Status Commercial: Active Features High impact resistance,Grease resistance,HB Availabilitys North America Process Methods Injection Molding…