About 4002EPG(+) flame retardant PA66 is halogen free environmental polyamide material with nitrogen and phosphorus as flame retardant elements, with 30% glass filled. Carbonize, expansion and physical cooling mechanism play the flame retardant performance. 4002EPG(+) halogen free flame retardant PA66…
About LubriOne™ Lubricated and Wear-Resistant Compounds have been specifically formulated to be self-lubricating materials, offering low coefficient of friction and improved wear resistance properties.&& Product Description Supplier Polyone Generic PA66 Material Status Commercial: Active Features Lubricating Availabilitys Asia Pacific Technical…
About Polyamide 66 (PA66) based compound. Heat stabilised. Glass fibres. UL94 V-0 classified, free of halogens-based flame retardants and red phosphorous.&& Product Description Supplier LATI Generic PA66 Material Status Commercial: Active Features Flame Characteristics,Low to no phosphorus content,Halogenated,Heat Stabilized,V-0 Availabilitys…
About Product Description Supplier DOMO Generic PA66 Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About Product Description Supplier DOMO Generic PA66 Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About Dynacom 304-G15 is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific. Primary attribute of Dynacom 304-G15: Flame Rated.&& Product Description Supplier Dynachem Generic PA66 Material Status Commercial: Active Features V-0 Availabilitys Asia Pacific Technical Data…
About Nylon 66, 13% Glass Filled, Black&& Product Description Generic PA66 Material Status Commercial: Active Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 1.23 g/cm³ ISO 1183 Shrinkage rate MD：3.2 mm 0.60 to 0.90 % ISO…
About LCA® N66-ST801 Type is a Polyamide 66 (Nylon 66) material. It is available in North America for injection molding. Important attributes of LCA® N66-ST801 Type are: Good Toughness Impact Modified Lubricated&& Product Description Generic PA66 Material Status Commercial: Active…
About 25% glass fiber reinforced, impact modified and heat stabilized, recycled grade&& Product Description Supplier A. Schulman Generic PA66 Material Status Commercial: Active Features High impact resistance Availabilitys Europe Process Methods Extrusion Technical Data PHYSICAL Nominal value Unit Test method…
About Staramide AS3 is 15 % Glass Bead Reinforced Polyamide 66 Injection Molding Resin&& Product Description Generic PA66 Material Status Commercial: Active Features HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL…
About TORZEN® G4000HSL NC01 is a 40% glass reinforced, heat stabilized, natural, PA66 resin suitable for many injection molding applications where high tensile strength and dimensional stability are needed.&& Product Description Supplier INVISTA Generic PA66 Material Status Commercial: Active Features…
About POLYNIL® P36/4 is an unreiforced Polyamide 66 (Nylon 66) for compounding and alloying. This general pourpose 2.4 viscosity Polyamide 66 resin is FDA compliant. POLYNIL® P36/4 has moisture content lower than 0.4%.&& Product Description Supplier Nilit Generic PA66 Material…
About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade.&& Product Description Generic PA66 Material Status Commercial:…
About KOPA® KN333HRN is a Polyamide 66 (Nylon 66) product. It can be processed by injection molding and is available in Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated RoHS Compliant Heat Resistant Medium Viscosity&& Product…
About PLUSTEK PA103NT is Natural, Low Viscocity POLYAMIDE 66, Extrusion u0026amp; Injection Molding Applications Product Description Supplier Ram-On Generic PA66 Material Status Commercial: Active Features Low Viscosity Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding…
About Product Description Supplier BASF Generic PA66 Material Status Commercial: Active Features Heat Stabilized Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data Process Conditions Injection Nominal value Unit Test method drying temperature 80.0…
About KOPLA PA66 KDT1020 is a Polyamide 66 (Nylon 66) material filled with 20% mineral. It is available in Asia Pacific. Important attributes of KOPLA PA66 KDT1020 are: Flame Rated Good Dimensional Stability Warp Resistant Typical applications include: Automotive Electrical/Electronic…
About Star L PA66 D91 is a PTFE lubricated, Aramid Fiber Reinforced , Polyamide 66 Injection Molding Resin&& Product Description Generic PA66 Material Status Commercial: Active Features Lubricating Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection…
About Product Description Generic PA66 Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.1 g/cm³ ASTM D792 Forming shrinkage rate 1.4-1.8 % ASTM D955 THERMAL Nominal value Unit Test method Hot deformation temperature 1.82Mpa 75…
About Standard Polyamide 6.6 Characteristics General purpose, natural color PA66 resin suitable for compouding, injection molding, and extrusion applications where ease of processing, good set of mechanical properties, high tenacity and elongation, good set of thermal properties good color and…