About Product Description Generic PC+ABS Material Status Commercial: Negative Features HB Availabilitys Europe,Asia Pacific,North America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.12 g/cm³ ASTM D792 Melt Flow Rate 240℃，5.0kg 8.6 g/10min ASTM D1238…
About Product Description Generic PC+ABS Material Status Commercial: Negative Features HB Availabilitys Europe,Asia Pacific,North America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.12 g/cm³ ASTM D792 Density 1.12 g/cm³ ISO 1183 Melt Flow Rate…
About Lupoy® GN5001RFG is a Polycarbonate + ABS (PC+ABS) material. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of Lupoy® GN5001RFG are: Flame Rated Flame Retardant Halogen Free Low Shrinkage&& Product…
About Product Description Supplier Yiweiyuan Generic PC+ABS Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Melt index 260℃,5kg 22 g/10min ASTM D1238 Density 23℃ 1.13 g/cm³ ISO 1183 MECHANICAL Nominal value Unit Test method tensile strength…
About Product Description Supplier LG Chemical Generic PC+ABS Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the…
About CYCOLOY CS9610 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) resin is an excellent flammability, low smoke grade that can be injection molded. This non-chlorinated, non-brominated flame retardant PC/ABS has a UL V0 & 5VB flame rating. CYCOLOY CS9610 resin is an excellent…
About Overview PULSE™ 2000EZ is a high-heat PC/ABS resin delivering optimized performance for automotive interior component applications. Benefits Easy flow, reduced scrap, and faster cycle times, while enabling thin wall part design for mass reduction. High-impact strength even at low…
About Description Heat resistance, High Flow, High Impact. Application Automotive (Interior, Exterior), E&E(Housing)&& Product Description Supplier LG Chemical Generic PC+ABS Material Status Commercial: Active Features High impact resistance,High liquidity,High Heat Resistance,HB Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding…
About (PC+ABS)-Blend; flame retardant; high heat resistant injection molding grade; improved chemical resistance and stress cracking behavior compared to KU2-1514; Vicat/B 120 temperature = 136°C; ball indentation temperature >= 125°C; UL recognition 94 V-1 at 1.0 mm; suitable as supporting…
About Infino NH-1024 is a Polycarbonate + ABS (PC+ABS) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Electrical/Electronic Applications. Characteristics include: Flame Rated Flame Retardant&& Product Description Supplier SAMSUNG…
About Product Description Supplier Techno Generic PC+ABS Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method Tensile strength 46 MPa ISO 527 bending strength 66 MPa ISO 178 Bending modulus 1800 MPa ISO 178 Rockwell hardness R104…
About CYCOLOY C2950 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) resin is a standard high heat grade that can be injection molded. This non-chlorinated, non-brominated flame retardant high heat PC/ABS has a UL V0 & 5VB flame rating. CYCOLOY C2950 resin is an…
About Product Description Supplier CHI MEI Generic PC+ABS Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 260℃，5.0kg 13 g/10min ISO 1133 Density 23℃ 1.15 g/cm³ ISO 1183 Flame retardancy 1.5mm…
About Product Description Supplier CHI MEI Generic PC+ABS Material Status Commercial: Active Features High impact resistance Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 260℃，5.0kg 38 g/10min ISO 1133 Mass density 23℃ 1.08 g/cm³…
About Product Description Supplier CHI MEI Generic PC+ABS Material Status Commercial: Active Features Antifreeze,Flame Characteristics Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 260℃，5.0kg 38 g/10min ISO 1133 Mass density 23℃ 1.07 g/cm³ ISO…
About Product Description Supplier CHI MEI Generic PC+ABS Material Status Commercial: Active Features Flame Characteristics Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 260℃，5.0kg 18 g/10min ASTM D1238 Density 23℃ 1.18 g/cm³ ASTM D792…
About Product Description Generic PC+ABS Material Status Commercial: Negative Technical Data Process Conditions Injection Nominal value Unit Test method drying temperature 90 – 110 ℃ Drying time 4 – 6 hrs Maximum moisture content 0.05 % Melting temperature 285 –…
About Product Description Generic PC+ABS Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Density 1.18 g/cm³ ASTM D792 Melt index 300℃，1.2kg 5 g/10min ISO 1133 Forming shrinkage rate 0.4 – 0.6 % ISO 294-4 Water absorption…
About Product Description Supplier SABIC Generic PC+ABS Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method tensile strength fracture 35 MPa ISO 527 fracture 45 MPa ASTM D638 yield 55 MPa ISO 527 yield 58 MPa ASTM…
About Description Heat Resistance, Impact Strength , High Toughness Application Helmet&& Product Description Supplier LG Chemical Generic PC+ABS Material Status Commercial: Active Features Good flexibility,High impact resistance,Heat Resistance, Good Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data…