About Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial: Active Features Bromine free,weathering resistance,Flame Characteristics Technical Data PHYSICAL Nominal value Unit Test method Density 1.2 g/cm³ ISO 1183 Molding shrinkage Vertical, 4 mm 0.5-0.7 % Internal Method Parallel, 4…

About Panlite®MN-4400 ( QM00352N)和(QM00723N)该两个色号为红外穿透PC。Panlite ® 光传感器用等级、除了拥有 Panlite ® ® 的耐冲击性、耐热性、尺寸稳定性以外，还具有能够吸收波长约 700nm 以下的光线，并且能够透过 700nm 以上近红外光的性质。基于这个特性，该材料可应用于光传感器的外壳部品。 Panlite ® ® 光 传感器用等级的特征 Ⅰ ． 在近红外光领域具有优异的光透过性。 Ⅱ ． 高耐热性，优异的热安定性。 Ⅲ ． 优异的脱模性、流动性 。 Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial: Active Features…

About Transparent Flame Retardant&& Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial: Active Features High liquidity,High infrared light transmittance,V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.20 g/cm³…

About Transparent Flame Retardant&& Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial: Active Features Good Dimensional Stability,V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.20 g/cm³ ISO 1183…

About Product Description Supplier SAMSUNG Generic Polycarbonate Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.24 g/cm³ ASTM D792 Melt Flow Rate 250℃，10kg 23 g/10min ASTM D1238 Shrinkage rate MD 0.3-0.6 % ASTM D955 TD…

About Product Description Supplier SAMSUNG Generic Polycarbonate Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.18 g/cm³ ASTM D792 Melt Flow Rate 300℃，1.20kg 10 g/10min ASTM D1238 250℃，10kg 18 g/10min ASTM D1238 Shrinkage rate MD…

About Iupilon® H-4000 is a Polycarbonate (PC) material. It is available in Asia Pacific, Europe, or North America for injection molding. Typical application of Iupilon® H-4000: Electrical/Electronic Applications&& Product Description Supplier Mitsubishi Generic Polycarbonate Material Status Commercial: Active Availabilitys North…

About LEXAN LUX7636C Polycarbonate (PC) resin is a non-filled, extrudable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating at 1.0 mm / 5VA rating at 3.0mm and is UV stabilized(F1 rating) providing additional weathering capability. LEXAN…

About MVR (330°C) 18 cm³/10 min; easy release; UV stabilized; ‘softening temperature (VST/B 120)=182°C; injection molding – melt temperature 330 – 340°C; Lamp covers; Headlamp lenses&& Product Description Supplier Covestro Generic Polycarbonate Material Status Commercial: Active Features Weather resistance is…

About LEXAN EXL9414 polycarbonate (PC) siloxane copolymer resin is a medium flow, non-chlorinated, non-brominated flame retardant opaque injection molding (IM) grade. This resin offers low temperature ductility, thin wall flame retardant capability, and in combination with excellent processability and release…

About Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial: Negative Features Low anisotropy Availabilitys Latin America,Asia Pacific,Europe,Africa & Middle East ,North America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.53 g/cm³ ISO 1183…

About Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active Features Weather resistance is good,High impact resistance,Heat Stabilized,HB Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 1.33 g/cm³ ASTM D792 Melt Flow Rate   ISO…

About Product Description Supplier Trinseo Generic Polycarbonate Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…

About UV, Steam and Long-term heat resistance, High strength&& Product Description Supplier Idemitsu Generic Polycarbonate Material Status Commercial: Active Features Good Rigidity,Weather resistance is good,Resistance to the steam,V-2 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection…

About Product Description Supplier Mitsubishi Generic Polycarbonate Material Status Commercial: Negative Features High liquidity,Good stability,weathering resistance Availabilitys Asia Pacific,North America,Latin America,Europe,Africa & Middle East Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.2 g/cm³ ISO…

About Infino CF-3104HF is a Polycarbonate (PC) product filled with glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Electrical/Electronic Applications. Characteristics include: Flame Rated RoHS Compliant&& Product Description…

About Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active Features Moderate liquidity,Heat Stabilized,Weather resistance is good Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.20 g/cm³ ASTM D792 Melt Flow Rate 300℃，1.2 kg 22 g/10min…

About Product Description Supplier CHI MEI Generic Polycarbonate Material Status Commercial: Active Features V-0 Technical Data PHYSICAL Nominal value Unit Test method Melt Volume Rate 300℃，1.2kg 10 cm³/10min ISO 1133 Specific Gravity 23℃ 1.2 g/cm³ ISO 1183 Molding shrinkage 0.4-0.6…

About Product Description Supplier LG Chemical Generic Polycarbonate Material Status Commercial: Negative Features Halogen free,Heat Resistance, Good,Flame Characteristics Availabilitys Europe,Asia Pacific,Latin America,North America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Specific Gravity 1.21 g/cm³ ASTM…

About MVR (300 °C kg) 15 cm³/10 min; medical devices; suitable for sterilization with high-energy radiation; biocompatible according to many ISO 10993-1 test requirements; medium viscosity; injection molding – melt temperature 280 – 320 °C; transparent parts for medical devices&&…