About PC alloy grade&& Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial: Active Features Flame Characteristics,V-1,5VB,V-0,5VA,HB Availabilitys Africa & Middle East ,North America,Europe,Latin America,Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.19…
About LEXAN ML6411 polycarbonate (PC) siloxane resin, is a high flow opaque injection molding (IM) grade with very low temperature ductility characteristics. This grade offers UL94 V0 @ 1.5mm and 5VA @ 3.0mm flame retardancy based on non-chlorine, non-bromine FR…
About Product Description Generic Polycarbonate Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Density 23℃ 1.2 g/cm³ ISO 1183 Melt Flow Rate 300℃，1.2kg 9 – 11 g/10min ISO 1133 Shrinkage rate 0.5 – 0.7 % ISO…
About CALIBRE™ 201-10 is produced in compliance with the US Food and Drug Administration (FDA) and EU food contact regulations. It provides excellent impact resistance, heat distortion resistance and optical clarity. CALIBRE 201-10 product is formulated with mold release. Govt.…
About Product Description Generic Polycarbonate Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Volume Rate 300℃ 10.4 g/10min ISO 1133 MECHANICAL Nominal value Unit Test method Tensile stress Yield, 50mm/min 54.6 MPa ISO 527 Tensile…
About Highly reflective, light shielding effect, Flame-retardant V-0&& Product Description Supplier Idemitsu Generic Polycarbonate Material Status Commercial: Active Features Flame Characteristics,High reflectivity,V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value…
About Product Description Supplier LG Chemical Generic Polycarbonate Material Status Commercial: Negative Features Flame Characteristics,V-0,High Heat Resistance,Halogen free Availabilitys North America,Asia Pacific,Latin America,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Specific Gravity 1.24 ASTM D792…
About TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and…
About 熔融指数MVR (300 °C kg) 4.0 cm³/10 min，通用；高粘度；紫外线稳定；简易释放；为安全护目镜而研制 Product Description Supplier Covestro Generic Polycarbonate Material Status Commercial: Active Features High Viscosity Technical Data MECHANICAL Nominal value Unit Test method Tensile modulus 1 mm/min 2270 MPa ISO 527-1-2 Yield stress 50…
About Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Negative Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About Lexan® 945W聚碳酸酯（PC）树脂是一种非填充，可注塑成型的牌号。 这种非氯化，非溴化阻燃PC具有UL-94 V0等级，有多种不透明颜色可供选择。 Lexan 945W是一种通用树脂，旨在满足各种应用的需求。 Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active Availabilitys Asia Pacific Technical Data MECHANICAL Nominal value Unit Test method tensile strength fracture 65 MPa ASTM D638 yield 62 MPa ASTM D638…
About ALS01是一种中低流量（MFR13），耐热和紫外线稳定的聚碳酸酯产品，具有脱模设计，适用于汽车 镜头市场。 Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active Features Heat Resistance, Good Availabilitys Africa & Middle East ,North America,Asia Pacific,Europe Technical Data MECHANICAL Nominal value Unit Test method tensile strength Yield, 50 mm/min 63 MPa…
About Product Description Supplier Wanhua Generic Polycarbonate Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 1.2 g/cm³ ASTM D792 Water absorption rate 23℃ 0.2 % ASTM D570 Forming shrinkage rate 0.5-0.7 % ASTM D955 Melt…
About Product Description Generic Polycarbonate Material Status Commercial: Negative Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 300℃，1.2kg 5.8 g/10min ISO 1133 Density 23℃，50%RH 1.192 g/cm³ ISO 1183 MECHANICAL Nominal value Unit Test…
About Product Description Generic Polycarbonate Material Status Commercial: Negative Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 300℃，1.2kg 10 g/10min ISO 1133 Density 23℃，50%RH 1.2 g/cm³ ISO 1183 Shrinkage rate TD 0.5-0.7 %…
About Product Description Generic Polycarbonate Material Status Commercial: Active Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 300℃，1.2kg 15 g/10min ISO 1133 Density 23℃，50%RH 1.2 g/cm³ ISO 1183 Shrinkage rate TD 0.5-0.7 %…
About MVR (300 °C kg) 19 cm³/10 min; general purpose; low viscosity; easy release; injection molding – melt temperature 280 – 320 °C; available in transparent, translucent and opaque colors&& Product Description Supplier Covestro Generic Polycarbonate Material Status Commercial: Active…
About MVR (300 °C kg) 19 cm³/10 min; food contact quality; low viscosity; easy release; injection molding – melt temperature 280 – 320 °C; available in transparent, translucent and opaque colors&& Product Description Supplier Covestro Generic Polycarbonate Material Status Commercial:…
About Med/high flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO and steam sterilizable. Contains mold release.&& Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active Features High liquidity,Steam…