About PC5800 resin is a very high flow (MFR = 8.9 at 250C) polycarbonate product designed for use in the optical media market. It is available exclusively at www.sabicpc.com.&& Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active Features…
About LEXAN™ SLX2271T resin Low viscosity PC copolymer blend with enhanced UV stabilization and added release agent. V2 rated. Available in transparent and tinted colors&& Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active Features Weather resistance is…
About Infino SA-1100 is a Polycarbonate (PC) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Electrical/Electronic Applications. Primary characteristic: flame rated.&& Product Description Supplier SAMSUNG Generic Polycarbonate Material Status…
About Product Description Supplier Covestro Generic Polycarbonate Material Status Commercial: Active Availabilitys Latin America,North America,Europe,Africa & Middle East ,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.20 g/cm³ ISO 1183 Apparent density 0.66 g/cm³ ISO 60 Melt…
About Product Description Generic Polycarbonate Material Status Commercial: Active Availabilitys China Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About MVR (300 °C kg) 9.0 cm³/10 min; flame retardant; UL 94V-0 mm and 5VA mm; medium viscosity; easy release; injection molding – melt temperature 280 – 320 °C; available in opaque colors only&& Product Description Supplier Covestro Generic Polycarbonate…
About Hopelex PC-1100U is a medium viscosity, clear polycarbonate, which is suitable for outdoor injection applications. Hopelex PC-1100U have UV stabilized ingredients to prevent degradation of final PC products from lights.&& Product Description Supplier LOTTE Generic Polycarbonate Material Status Commercial:…
About PC-1070U has higher viscosity, impact strength, tensile & flexural strength, and elastic modulus, which can be used in sheet-extrusion and stringent demand such as and goggles etc. Hopelex PC-1070U have UV stabilized ingredients to prevent degradation of final PC…
About LUPOY PC 1301V-10 resin is designed for extrusion and injection molding products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.&& Product Description Supplier LG Chemical Generic Polycarbonate Material Status Commercial: Active Features Good…
About LUPOY PC 1201-15 resin is designed for extrusion and injection molding products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.&& Product Description Supplier LG Chemical Generic Polycarbonate Material Status Commercial: Active Features Good…
About Product Description Generic Polycarbonate Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Density 1.25 g/cm³ ASTM D792 Melt index 300℃，1.2kg 15 g/10min ISO 1133 Forming shrinkage rate 0.3 – 0.6 % ISO 294-4 Water absorption…
About Product Description Generic Polycarbonate Material Status Commercial: Negative Technical Data Process Conditions Injection Nominal value Unit Test method drying temperature 90 – 100 ℃ Drying time 4 – 6 hrs Maximum moisture content 0.05 % Melting temperature 285 –…
About Product Description Generic Polycarbonate Material Status Commercial: Negative Technical Data Process Conditions Injection Nominal value Unit Test method drying temperature 90 – 110 ℃ Drying time 4 – 6 hrs Maximum moisture content 0.05 % Melting temperature 285 –…
About Product Description Generic Polycarbonate Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Density 1.25 g/cm³ ASTM D792 Melt index 300℃，1.2kg 25 g/10min ISO 1133 Forming shrinkage rate 0.3 – 0.6 % ISO 294-4 Water absorption…
About Product Description Generic Polycarbonate Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Density 1.40 g/cm³ ASTM D792 Melt index 300℃，1.2kg 35 g/10min ISO 1133 Forming shrinkage rate 0.2 – 0.4 % ISO 294-4 MECHANICAL Nominal…
About Product Description Generic Polycarbonate Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Density 1.25 g/cm³ ASTM D792 Melt index 300℃，1.2kg 19 g/10min ISO 1133 Forming shrinkage rate 0.3 – 0.6 % ISO 294-4 Water absorption…
About Product Description Supplier Wanhua Generic Polycarbonate Material Status Commercial: Negative Features High liquidity Technical Data PHYSICAL Nominal value Unit Test method Density 1.20 g/cm³ ASTM D792 Water absorption rate 23℃，50%RH 0.2 % ASTM D570 Melt index 300℃，1.2kg 10 g/10min…
About Product Description Generic Polycarbonate Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Density 1.25 g/cm³ ASTM D792 Melt index 300℃，1.2kg 15 g/10min ISO 1133 Forming shrinkage rate 0.3 – 0.6 % ISO 294-4 Water absorption…
About Product Description Supplier Wanhua Generic Polycarbonate Material Status Commercial: Negative Features low-temperature impact resistance Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the…
About Product Description Supplier Wanhua Generic Polycarbonate Material Status Commercial: Negative Features low-temperature impact resistance Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the…