About Carbotex KV-40FD is a Polycarbonate (PC) product. It can be processed by injection molding and is available in Africa & Middle East, Europe, Latin America, or North America. Characteristics include: Food Contact Acceptable Medium Viscosity&& Product Description Supplier Kotec…

About LEXAN 2814R是高粘度、10%玻璃增强、阻燃剂级别的聚碳酸酯树脂，特别为满足CSTB M2的易燃性而开发 Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active Features High Viscosity Availabilitys Africa & Middle East ,Asia Pacific,Europe Technical Data MECHANICAL Nominal value Unit Test method Taber wear and tear CS-17，1kg 11 mg/1000cy ISO…

About Ekalon® 14 E I S is a Polycarbonate (PC) product. It is available in Europe. Primary characteristic: flame rated.&& Product Description Generic Polycarbonate Material Status Commercial: Active Features HB Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method…

About EMERGE™ PC 8701HH Advanced Resin is an ignition-resistant, glass reinforced, polycarbonate resin. This resin contains no bromine, chlorine, or phosphate additives. It is a medium flow PC resin with a mold release system, intended for injection molding applications. EMERGE…

About ALCOM® PWL 10/1 WT41-913LB is a Polycarbonate (PC) product filled with 15% filler. It is available in Asia Pacific, Europe, or North America. Applications of ALCOM® PWL 10/1 WT41-913LB include lighting applications, automotive and reflectors. Characteristics include: Flame Rated…

About CALIBRE™ 300-6 Polycarbonate resins offer exceptional impact resistance, heat distortion resistance, and optical clarity as well as high melt strength for blow molding and sheet applications. The CALIBRE 300-6 series products are available in 4 additive packages: CALIBRE 300:…

About Silicone-based Flame Retardant / Light Reflective Grades&& Product Description Supplier Sumitomo Generic Polycarbonate Material Status Commercial: Active Features Flame Characteristics,High reflectivity Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.29 g/cm³ ISO 1183 Shrinkage rate…

About Description PC UnFilled White Compound Product Applications Electrical/Electronics, Housing Appliance, Industrial, Medical & health care application such as Telecommunication hardware, sunroom, carports, car & truck washes, LCD, sliding doors, window, lab Instrument etc Benefits Good dimensional stability & High…

About Iupilon® EFT2200 is a Polycarbonate (PC) material. It is available in Asia Pacific, Europe, or North America for extrusion or injection molding. Important attributes of Iupilon® EFT2200 are: Flame Rated Flame Retardant Halogen Free&& Product Description Supplier Mitsubishi Generic…

About Kingfa JH710 G10是一种聚碳酸脂合金（PC 合金）材料,含有的填充物为10% 玻璃纤维增强材料。 该产品在北美洲或亚太地区有供货,加工方式为:注射成型。 Kingfa JH710 G10的主要特性有: 阻燃/额定火焰 Flame Retardant 高强度 美观 典型应用领域包括: 电气/电子应用 印刷应用&& Product Description Supplier Kingfa Generic Polycarbonate Material Status Commercial: Active Features Good Rigidity,Good surface appearance,Flame Characteristics,V-0 Availabilitys North America,Asia Pacific Process Methods…

About Medium Viscosity, UV Stabilized Polycarbonate&& Product Description Generic Polycarbonate Material Status Commercial: Active Features Weather resistance is good,V-2 Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 1.20 g/cm³ ASTM D792 Melt Flow Rate 300℃，1.20kg 16…

About PC0800 resin is a low flow (MFR = 8 at 300?C), heat stabilized, polycarbonate product designed for use in the custom compounding market. It does not contain UV stabilizer or mold release. It is available exclusively at www.sabicpc.com. Product…

About Iupilon® EFD2110U is a Polycarbonate (PC) material. It is available in Asia Pacific, Europe, or North America for injection molding. Primary attribute of Iupilon® EFD2110U: Flame Rated.&& Product Description Supplier Mitsubishi Generic Polycarbonate Material Status Commercial: Active Features V-0…

About Product Description Supplier LUXI Generic Polycarbonate Material Status Commercial: Active Features Good Clarity,High impact resistance Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from…

About Sup-tech C706 is a Polycarbonate (PC) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific. Primary characteristic: flame rated.&& Product Description Supplier Suptech Generic Polycarbonate Material Status Commercial: Negative…

About Weather resistance&& Product Description Supplier Idemitsu Generic Polycarbonate Material Status Commercial: Active Features Copolymer,Weather resistance is good Availabilitys Asia Pacific,Europe,Africa & Middle East ,North America,Latin America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density…

About ALCOM® LD2 PC 1000 UV 14019 WT1030-14 is a Polycarbonate (PC) product filled with filler. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of ALCOM® LD2 PC 1000 UV…

About Kangxi® PC-20GF is a Polycarbonate (PC) product filled with 20% glass fiber. It is available in Asia Pacific. Applications of Kangxi® PC-20GF include electrical/electronic applications, automotive, housings and printing applications. Characteristics include: Flame Rated RoHS Compliant Good Aesthetics Good…

About NB-10 and NB-20 are polymers produced from propylene oxide and carbon dioxide. They are amorphous, linear, aliphatic polycarbonate polymers. Carbon dioxide accounts for approximately 40% of the polymer mass. Applications: NB polymers can be used as binders or additives…

About 30% 玻璃增强，优良的机械性能，紫外线稳定，内部脱模剂 Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active Features Good Rigidity,Weather resistance is good,Internal mold release Availabilitys North America Technical Data MECHANICAL Nominal value Unit Test method tensile strength Fracture, Type I, 5 mm/min 133…