About OP – PC – Filled 20GF是一种聚碳酸酯（PC）材料,含有的填充物为20% 玻璃纤维增强材料。 该产品在北美洲有供货,加工方式为:注射成型。&& Product Description Generic Polycarbonate Material Status Commercial: Active Availabilitys North America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.35 g/cm³ ASTM D792 Shrinkage rate MD…
About PC, 20% glass fibre filled grade&& Product Description Generic Polycarbonate Material Status Commercial: Active Features V-2,V-1 Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.35 g/cm³ ISO 1183 Melt Flow Rate 300℃，1.20kg 7.0 g/10min ISO 1133…
About LEXAN EXL8134 is a PC/siloxane copolymer resin with high flow, excellent low temperature impact and 30% post consumer recycle content. Limited availability and restricted color only. Higher color variability and contamination risks including black specs needs to be considered…
About 中等粘度，多用途聚碳酸酯树脂，增加了脱模剂，食品接触级的只适用有限的颜色，从2007年1月15日起，这一等级将不再受生物相容性信息的支持，也不应被用于要求生物相容性的医学应用。供替代的选择有 HP3REU。 Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active Features Good stripping performance Availabilitys Africa & Middle East ,Asia Pacific,Europe Technical Data MECHANICAL Nominal value Unit Test method Taber wear and tear CS-17，1 kg 10 mg/1000cy…
About MARCOBLEND AU2000 is an ignition resistant and glass fiber reinforced polycarbonate resin. The resin is Halogen free and compliance with TCO and RoHS certification. The unique characters include superior processability, good stiffness, and excellent dimension stability and suitable for…
About Kingfa JH720-R0G40 is a Polycarbonate (PC) material filled with 40% glass fiber. It is available in Asia Pacific or North America for injection molding. Important attributes of Kingfa JH720-R0G40 are: Flame Rated Flame Retardant Good Aesthetics Good Dimensional Stability…
About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade.&& Product Description Generic Polycarbonate Material Status Commercial:…
About Tuffak® CM-2 is a Polycarbonate (PC) product. It is available in North America.&& Product Description Supplier Arkema Generic Polycarbonate Material Status Commercial: Active Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method Density 1.20 g/cm³ ASTM D792…
About LEXAN MPX2 polycarbonate (PC) siloxane copolymer resin is a injection molding (IM) grade with release properties. This resin offers good low temperature ductility in combination with medium flow characteristics and excellent processability with opportunities for shorter IM cycle times…
About PRL PC-GP3-D-(color)-1 is a Polycarbonate (PC) product. It can be processed by injection molding and is available in North America. Characteristics include: Flame Rated RoHS Compliant Good Mold Release High Flow Mold Release Agent&& Product Description Generic Polycarbonate Material…
About Glass fiber reinforced grades-10% Glass fiber, Isotropy grade&& Product Description Supplier TEIJIN Generic Polycarbonate Material Status Commercial: Active Features Good Isotropy,V-2 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value…
About TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and…
About Nemcon™ H-series products are designed for use in high performance electronic assemblies where heat removal is critical to system performance. Nemcon™ H PC DP105/X3 BK is a black colored, thermally conductive polycarbonate compound, combining excellent thermal conductivity with high…
About Sindustris PC SC1005A is a Polycarbonate (PC) material. It is available in Asia Pacific for injection molding. Important attributes of Sindustris PC SC1005A are: Flame Rated Impact Resistant Chemical Resistant Heat Resistant Typical applications include: Electrical/Electronic Applications Housings&& Product…
About Velvet/Matte Environmental, excellent flame retardance, excellent insulating&& Product Description Supplier OMAY Generic Polycarbonate Material Status Commercial: Active Features Flame Characteristics Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.25…
About Injection Molding Grade, Medical Device Applications, Suitable for EtO and Steam Sterilization at 121°C, w/Mold Release, FDA and RoHS Complaint NC230 = To Be Assigned 5 Digit Number Indicating Clear, or Opaque Custom Color. Contact Enviroplas Regarding UL Recognized…
About Product Description Supplier YOUHUA Generic Polycarbonate Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Shrinkage rate 0.5-0.7 % ASTM D955 Density 1.2 g/cm³ ASTM D792 Melt Flow Rate 12 g/10min ASTM D1238…
About ALCOM® PC 740/4 GY1177-05LD is a Polycarbonate (PC) product filled with filler. It is available in Asia Pacific, Europe, or North America. Applications of ALCOM® PC 740/4 GY1177-05LD include automotive, decorative parts and lighting applications. Characteristics include: Flame Rated…
About Product Description Supplier SAMSUNG Generic Polycarbonate Material Status Commercial: Active Features V-2 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density – 1.20 g/cm³ ASTM D792 Water absorption rate 23℃…
About LEXAN EXL1890T polycarbonate (PC) siloxane copolymer resin is a transparent injection molding grade for food contact applications. This resin offers cold temperature (0 °C) ductility in combination with very high flow characteristics and excellent processability with opportunities for shorter…