About UL rated HB as of 10 200 series recommended when V-2 rating required. Nonhalogenated. 7.0 MFR, for thicker sections without sinks. UV stabilized for outdoor and lighting.&& Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active Features Weather…
About Integra™ PC 5017 R is a Polycarbonate (PC) material. It is available in North America. Primary attribute of Integra™ PC 5017 R: Flame Rated.&& Product Description Generic Polycarbonate Material Status Commercial: Active Availabilitys North America Technical Data PHYSICAL Nominal…
About CALIBRE™ 200-6 polycarbonate resins are produced in compliance with the US Food and Drug Administration (FDA) and EU food contact regulations. They provide excellent impact resistance, heat distortion resistance and optical clarity as well as high melt strength for…
About Iupilon® GS2030MN1 is a Polycarbonate (PC) material filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of Iupilon® GS2030MN1 are: Flame Rated Flame Retardant&& Product Description Supplier Mitsubishi…
About 10％玻纤增强，易脱模，高模量和冲击强度。 Product Description Supplier LOTTE Generic Polycarbonate Material Status Commercial: Active Features High impact resistance,Good stripping performance,Glass fiber reinforced,High modulus Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.26 g/cm³ ASTM D792 Shrinkage rate 0.2~0.4…
About MVR (300 °C kg) 6.0 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 °C; biocompatible according to many ISO 10993-1 test requirements; high viscosity; easy release; injection molding – melt temperature 280 – 320 °C;…
About TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and…
About Sindustris PC GP2103 is a Polycarbonate (PC) material filled with 10% glass fiber. It is available in Asia Pacific for injection molding. Important attributes of Sindustris PC GP2103 are: Flame Rated Chemical Resistant Good Toughness Typical application of Sindustris…
About LEXAN 263F is a medium viscosity multi purpose UV stabilized grade with improved release performance. This grade is UL94-V2 at 0.8 mm approved.&& Product Description Supplier SABIC Generic Polycarbonate Material Status Commercial: Active Features Weather resistance is good,V-2,V-0 Availabilitys…
About Description General Purpose, Light Diffusion Application IT/OA Housing and Components&& Product Description Supplier LG Chemical Generic Polycarbonate Material Status Commercial: Active Features HB Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test…
About Polycarbonate, Standard Grade, Low Viscosity, Lubricated and UV Stabilized for Injection Molding Grade&& Product Description Generic Polycarbonate Material Status Commercial: Active Features Weather resistance is good,Low Viscosity,Lubricating,V-2 Availabilitys Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit…
About NOVAREX® M7027U is a Polycarbonate (PC) material. It is available in Asia Pacific, Europe, or North America.&& Product Description Supplier Mitsubishi Generic Polycarbonate Material Status Commercial: Active Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method…
About Iupilon® CLV1000 is a Polycarbonate (PC) material. It is available in Asia Pacific, Europe, or North America for injection molding. Primary attribute of Iupilon® CLV1000: High Viscosity. Typical applications include: Medical/Healthcare Optics/Lenses&& Product Description Supplier Mitsubishi Generic Polycarbonate Material…
About Med/high flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO and steam sterilizable. Contains a higher amount of release than HP2EU.&& Product Description Supplier SABIC Generic Polycarbonate Material Status…
About ZELUX® SD-P (Static-dissipative Polycarbonate) Carbon-powder-filled material with resistivity levels in the 1E7 – 1E11 range with high flexural strength and good thermal stability to 270° F. UL94 V-O rated at 0.030 in, this material is thermoformable in 0.010″ –…
About LEXAN GLX resin is a medium viscosity grade which is an excellent candidate for applications with high optical quality requirements, such as automotive glazing applications. Available in transparent clear (automotive glazing colors under development).&& Product Description Supplier SABIC Generic…
About TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and…
About Polycarbonate low viscosity, good flow for low thickness walls. UL94 V2 approved all colors at 1,6 mm Available: in natural, trasparent and opaque colors.&& Product Description Generic Polycarbonate Material Status Commercial: Active Features Good liquidity,Low Viscosity,V-2 Availabilitys Europe Process…
About LNP Thermocomp compound DX14354X is an improved flow, colorable compound based on PC copolymer resin developed for applications that require Laser Direct Structuring (LDS) for antenna, or electronic circuit manufacturing. Thermocomp compound DX14354X helps customers to improve productivity with…
About LNP* LUBRICOMP* DFL22ER is a compound based on Polycarbonate resin containing 10% Glass Fiber and 10% PTFE. Added features of this material include: Wear Resistant, Easy Molding, Mold Release. Also known as: LNP* LUBRICOMP* Compound DFL-4022 EM MR Product…