About Product Description Supplier ZYPEEK Generic PEEK Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method Tensile strain Fracture, 23 ℃ 15 % ISO 527 Bending modulus 23℃ 4100 MPa ISO 178 bending strength Yield, 23 ℃…
About Carbon Fiber – Electrically Conductive – High Flow&& Product Description Generic PEEK Material Status Commercial: Negative Features High liquidity,Conductive,V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test…
About 30 % carbon fiber reinforced polyetheretherketone, low viscosity&& Product Description Supplier A. Schulman Generic PEEK Material Status Commercial: Active Features V-0 Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.41…
About This bearing grade of extruded Ketron PEEK offers the lowest coefficient of friction and best machinability of all Ketron grades. It is ideal for low wear, high PV parts that require chemical resistance. Excellent chemical resistance Very low moisture…
About Product Description Supplier ZYPEEK Generic PEEK Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method Shore hardness 23℃ 87 D 级 ISO 868 compressive strength 23℃ 250 MPa ISO 604 Tensile strain Fracture, 23 ℃ 2.4…
About High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, fine powder for compression moulding, low flow, FDA food contact compliant, colour natural.&& Product Description Supplier Victrex Material Status Commercial: Active Features Hypocrystalline,Low liquidity,Food contact compliance Availabilitys Latin America,Europe,Africa &…
About Glass Fiber – Low Flow&& Product Description Generic PEEK Material Status Commercial: Negative Features Low liquidity,V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.44…
About The good biocompatibility, processability and the option to pigment make the VESTAKEEP® Care-Grades an ideal material for the fabrication of medical devices with short time contact to human blood, tissue or bone for up to 30 days. Because of…
About HiFill® PEEK GF30 A 2020 is a Polyetheretherketone (PEEK) product filled with 30% glass fiber. It can be processed by injection molding and is available in North America. Primary characteristic: flame rated.&& Product Description Generic PEEK Material Status Commercial:…
About High-viscosity, unreinforced polyether ether ketone VESTAKEEP 5000G is a high-viscosity, unreinforced polyether ether ketone for injection molding and extrusion. The semi-crystalline polymer features superior thermal and chemical resistance. Parts made from VESTAKEEP 5000G are selfextinguishing. VESTAKEEP 5000G can be…
About Aramid Fiber Reinforced – PTFE Lubricated&& Product Description Generic PEEK Material Status Commercial: Negative Features Lubricating,V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.40…
About LNP THERMOCOMP LX03447 is a compound based on Polyetheretherketone containing Proprietary Filler(s).&& Product Description Supplier SABIC Generic PEEK Material Status Commercial: Active Availabilitys North America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.43…
About KetaSpire® KT-880SFP is the high flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural-color super-fine powder form. This super-fine PEEK powder is suitable for water borne coatings, electrostatically driven powder coatings, and resin pre-impregnation of continuous fiber composites.…
About LUVOCOM® 1105-8356 is a Polyetheretherketone (PEEK) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of LUVOCOM® 1105-8356 are: Flame Rated Chemical Resistant Flame Retardant Sterilizable…
About LUVOCOM® 1105-0699 is a Polyetheretherketone (PEEK) material filled with carbon fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of LUVOCOM® 1105-0699 are: Flame Rated Conductive…
About AKROTEK® PEEK GF 50 natural (5100) is a 50% glass fibre reinforced polyetheretherketone with very high stiffness and strength Elements in the automotive-, aeronautical-, industrial- and medical engineering that require high strength in a temperature environment above 150°C&& Product…
About 20% polyetheretherketone + 5% graphite + 75% virgin PTFE&& Product Description Material Status Commercial: Active Availabilitys Asia Pacific,Africa & Middle East ,Latin America,North America,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.93 g/cm³ ASTM D4894 Apparent density…
About Product Description Supplier ZYPEEK Generic PEEK Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density crystallization 1.3 g/cm³ ISO 1183 Amorphous 1.26 g/cm³ ISO 1183 Water absorption rate 0.07 % ISO 62-1 0.4 % ISO…
About Ketron® PEEK 30% GF Compression is a Polyetheretherketone (PEEK) product filled with 30% glass fiber. It can be processed by compression molding and is available in Latin America or North America. Primary characteristic: flame rated.&& Product Description Supplier Quadrant…
About KetaSpire® KT-880FP is the high-flow grade of unreinforced polyetheretherketone (PEEK) supplied in a natural color fine powder form for compression molding and other uses that can benefit from the fine powder form. KetaSpire® PEEK is produced to the highest…