About LUVOCOM® 1105-7786/L-NAT是一种聚醚醚酮(PEEK)材料,。 该产品在欧洲、非洲和中东、北美洲、拉丁美洲或亚太地区有供货,。 LUVOCOM® 1105-7786/L-NAT的主要特性有: Flame Retardant 抗翘曲 耐化学品 耐磨 润滑 典型应用领域包括: 工程/工业配件 医疗/保健 汽车行业 航空航天 手柄&& Product Description Supplier Lehmann Generic PEEK Material Status Commercial: Active Features Low warping,Hydrolysis stability,Flame Characteristics,Lubricating,Good wear resistance,Solvent resistance Availabilitys Africa & Middle…

About KetaSpire® KT-880 GF15 is a high flow, 15% glass-fiber reinforced grade of polyetheretherketone (PEEK). This resin offers higher strength and stiffness properties relative to unreinforced KetaSpire® PEEK resin. The glass fiber content is optimized to provide a balance of…

About GATONE™ 5630GF is a Polyetheretherketone (PEEK) material filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary attribute of GATONE™ 5630GF: Flame Rated. Typical application of GATONE™ 5630GF: Wire & Cable&& Product Description…

About Glass Fiber – FDA Compliant Ingredients&& Product Description Generic PEEK Material Status Commercial: Negative Features V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.40…

About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. -Preliminary Product Data per RTP Co.-&& Product…

About LUVOCOM® 1105/BL8052是一种聚醚醚酮(PEEK)材料,。 该产品在北美洲、非洲和中东、拉丁美洲、欧洲或亚太地区有供货,。 LUVOCOM® 1105/BL8052的主要特性有: 阻燃/额定火焰 Flame Retardant 具可灭菌性 耐化学品 典型应用领域包括: 纺织/纤维 工程/工业配件 航空航天 汽车行业 医疗/保健&& Product Description Supplier Lehmann Generic PEEK Material Status Commercial: Active Features Steam sterilized,Hydrolysis stability,Flame Characteristics,Solvent resistance,V-0 Availabilitys Africa & Middle East ,North America,Latin…

About Carbon Fiber – High Flow&& Product Description Generic PEEK Material Status Commercial: Negative Features High liquidity,V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.33…

About KETRON® PEEK-CLASSIX LSG white stock shapes are produced from Invibio® PEEK-CLASSIX White resin. This material exhibits a unique combination of mechanical properties, temperature and chemical resistance. The composition of the Invibio PEEK-CLASSIX White resin complies with the regulations that…

About UNITREX CM3801 extruded thermoplastic shapes provide users with improved physical properties compared to standard, unfilled PEEK grades through the addition of a proprietary ceramic filler. Additionally, this material offers Continuous Use Temperature of up to 480 ° F (249…

About Product Description Generic PEEK Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method tensile strength 180 MPa GB/1040 bending strength 260 MPa GB/9341 Bending modulus 1200 MPa GB/9341 Tensile strain 2.5 % GB/1040 friction coefficient 0.35…

About LUVOCOM® 1105-8000是一种聚醚醚酮(PEEK)材料,含有的填充物为碳纤维增强材料。 该产品在亚太地区、北美洲、拉丁美洲、欧洲或非洲和中东有供货,。 LUVOCOM® 1105-8000的主要特性有: 阻燃/额定火焰 Flame Retardant 水解稳定性 润滑 耐化学品 典型应用领域包括: 工程/工业配件 医疗/保健 汽车行业 纺织/纤维 航空航天&& Product Description Supplier Lehmann Generic PEEK Material Status Commercial: Active Features Good Rigidity,Hydrolysis stability,Low coefficient of friction,Flame Characteristics,Self-lubricating,Lubricating,Good wear resistance,Solvent resistance,V-0 Availabilitys…

About Unreinforced, high-viscosity polyether ether ketone fine powder. VESTAKEEP 4000P is an unreinforced, high-viscosity polyether ether ketone fine powder. The product is suitable for the manufacture of compounds or it can be used as scatterpowder for the manufacture of composites.…

About Glass Fiber – High Flow&& Product Description Generic PEEK Material Status Commercial: Negative Features High liquidity,V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.61…

About Long Glass Fiber&& Product Description Generic PEEK Material Status Commercial: Negative Features V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.52 g/cm³ ASTM D792…

About Carbon fiber-reinforced (30%) polyether ether ketone VESTAKEEP 2000 CF30 is a medium-viscosity, carbon fiber-reinforced (30%) polyether ether ketone for injection molding. The semi-crystalline polymer features superior mechanical, thermal, and chemical resistance. Parts made from VESTAKEEP 2000 CF30 are self-extinguishing.…

About Product characteristics High purity USP VI and ISO 10993 tested on semi-finished product Very good sterilisation resistance Product applications Medical engineering Pharmaceutical industry Precision mechanics&& Product Description Generic PEEK Material Status Commercial: Active Features High purity,V-0 Availabilitys North America,Latin…

About Arlon® 1163 is a Polyetheretherketone (PEEK) product filled with glass fiber. It can be processed by injection molding and is available in Europe or North America. Typical application: Military Applications.&& Product Description Generic PEEK Material Status Commercial: Active Availabilitys…

About Excellent chemical resistance Very low moisture absorption Inherently good wear and abrasion resistance Unaffected by continuous exposure to hot water or steam&& Product Description Supplier Quadrant Generic PEEK Material Status Commercial: Active Features Alkali resistant,Ethanol tolerance,Acidproof,Solvent resistance,Hydrocarbons,V-0 Availabilitys North…

About LUVOCOM® 1105-0904/GN2 is a Polyetheretherketone (PEEK) material filled with glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of LUVOCOM® 1105-0904/GN2 are: Flame Rated Biocompatible…

About LUVOCOM® 1105-0918/BL is a Polyetheretherketone (PEEK) material filled with glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of LUVOCOM® 1105-0918/BL are: Flame Rated Chemical…