About Iupital® TC3015 is an Acetal (POM) Copolymer material filled with 15% talc. It is available in Asia Pacific, Europe, or North America for injection molding. Primary attribute of Iupital® TC3015: Flame Rated.&& Product Description Supplier Mitsubishi Generic Copolymer Polyformaldehyde…

About Kocetal WR701 is U.V. stabilized grade suitable for out door applications.&& Product Description Supplier Kolon Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features Weather resistance is good,HB Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL…

About Iupital® FB2025 is an Acetal (POM) Copolymer material filled with glass bead. It is available in Asia Pacific, Europe, or North America for injection molding. Primary attribute of Iupital® FB2025: Flame Rated.&& Product Description Supplier Mitsubishi Generic Copolymer Polyformaldehyde…

About Celcon® acetal copolymer grade M15HP is a creep resistant, high viscosity polymer providing optimum performance in general purpose injection molding. This grade provides overall excellent performance in applications requiring high stiffness. Chemical abbreviation according to ISO 1043-1: POM&& Product…

About TECAFORM® is a semi-crystalline thermoplastic offering high strength, stiffness and toughness. TECAFORM® is resistant to hot water, hydrocarbons and solvents, and it possesses good bearing and wear properties. It is available in natural and black grades. TECAFORM® is commonly…

About Chemical abbreviation according to ISO 1043-1: POM-HI Molding compound ISO 9988- POM-K, M-GNPR, 05-001 POM copolymer, modified Easy flowing, elastomer-containing injection molding type based on HOSTAFORM C 27021 with high toughness, and slightly lower hardness, rigidity and chemical resistance…

About Kepital®   F20-51U A UV-stabilized and impact-improved medium-viscosity grade for general injection molding (black-colored) Suitable for uses requiring strong weather resistance Developed for applications in automotive exteriors and exposed parts&&Kepital®   F20-51U UV resistance with UV carbon black, plus…

About Titacon® GF925UV is an Acetal (POM) Copolymer material filled with 25% glass fiber. It is available in Asia Pacific. Important attributes of Titacon® GF925UV are: Flame Rated High Stiffness High Strength&& Product Description Supplier Titan Generic Copolymer Polyformaldehyde Material…

About Tarnoform® 500 GF8 there is 40% glass fibres reinforced injection-moulding grade with extremely high strength and stiffness and with reduced shrinkage and coefficient of linear thermal expansion, combined with higher flowability during moulding.&& Product Description Generic Copolymer Polyformaldehyde Material…

About Tarnoform® 300 GF3 there is 15% glass fibres reinforced injection-moulding grade with increased strength and stiffness and with reduced shrinkage and coefficient of linear thermal expansion.&& Product Description Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features Good Rigidity,Low contractility,HB…

About Iupital® F20-73R1 is an Acetal (POM) Copolymer material. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of Iupital® F20-73R1 are: Flame Rated Low Emissions&& Product Description Supplier Mitsubishi Generic Copolymer Polyformaldehyde Material…

About Hostaform® acetal copolymer grade SXT90Z-01 XAP is UV stabilized, impact modified material available in a range of colors for automotive interior applications plus meets the typical low emission requirements of the automotive market. Chemical abbreviation according to ISO 1043-1:…

About High Rigidity Application Casings of Pump and Pivot Bearings&& Product Description Supplier LG Chemical Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features HB Availabilitys Asia Pacific,North America,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method…

About Tarnoform® 300 LS is the fast cycling injection-moulding grade, good chemical resistance, modified with soluble light stabilisers improving light resistance.&& Product Description Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features Weather resistance is good,Quick molding cycle,Solvent resistance,HB Availabilitys Africa…

About LUVOCOM® 80-7580 is an Acetal (POM) Copolymer material filled with aramid fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of LUVOCOM® 80-7580 are: High Dimensional…

About Titacon® EX210 is an Acetal (POM) Copolymer material. It is available in Asia Pacific for extrusion. Important attributes of Titacon® EX210 are: Flame Rated Carbon Black&& Product Description Supplier Titan Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features Antistatic…

About Titacon® GF925TF10 is an Acetal (POM) Copolymer material filled with 25% glass fiber. It is available in Asia Pacific. Important attributes of Titacon® GF925TF10 are: Flame Rated Good Dimensional Stability High Stiffness High Strength Lubricated&& Product Description Supplier Titan…

About SABIC® POM 460S is an extremely easy flowing grade suitable for injection molding applications for very thin-walled precision molded parts with critical flow-path-wall thickness relation; the grade permits processing at reduced temperature, shorter cycle times suitable for many parts.…

About POM Copolymer unreinforced, improved fuel resistance&& Product Description Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features Fuel resistance Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.41 g/cm³ ISO…

About Kocetal MS301 is molibdenum disulfide lubricated grade for low friction, wear and noise.&& Product Description Supplier Kolon Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features noise reduction,Low coefficient of friction,Lubricating,Good wear resistance,HB Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods…