About A 30% glass bead-filled grade for general injection molding Suitable for parts requiring low warpage, reduced sink marks, and dimensional stability&& Product Description Supplier Korea Engineering Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features Low warping,Good Dimensional Stability,Copolymer,HB Availabilitys…
About Amcel® KP20 is a medium-viscosity, general purpose injection moldable grade. Product Description Supplier Celanese Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features High liquidity,Low Viscosity,Solvent resistance,Heat Stabilized Technical Data PHYSICAL Nominal value Unit Test method Density 1.41 g/cm³ ISO…
About Iupital® F20-54 is an Acetal (POM) Copolymer material. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of Iupital® F20-54 are: Flame Rated Weather Resistant Typical application of Iupital® F20-54: Automotive&& Product Description…
About Kepital® TX-21 A polymer-modified wear-resistance grade (medium viscosity) for general injection molding Suitable for applications requiring reduced wear noise and a strong friction and wear resistance without sacrificing mechanical properties&&Kepital® TX-21 Medium viscosity, lubricant pacakge grade. TX-21…
About TEPCON® M450 NAT is an Acetal (POM) Copolymer product. It is available in Asia Pacific. Characteristics include: Flame Rated Fast Molding Cycle High Flow&& Product Description Supplier Polyplastics Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features High liquidity,Quick molding…
About Kepital® F15-33 A medium-high viscosity grade for general injection molding Features improved toughness and molding cycle time&&Kepital® F15-33 Medium-high viscosity grade for general injection molding. F15-33 provides higher toughness and faster cycle than F20-03.&& Product Description Supplier…
About DURACON® M90-71 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated Heat Resistant&& Product Description…
About SABITAL™ 90GV10 is POM copolymer compounded with glass fibers for injection molding applications, it is reinforced with ca. 10% glass fibers for application requiring high stiffness, strength and thermal property. Product Description Supplier SABIC Generic Copolymer Polyformaldehyde Material Status…
About Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 04-002 POM copolymer Easy flowing Injection molding type like C 13021, but with higher strength, rigidity and hardness over the entire permissible temperature range for HOSTAFORM;…
About Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNS, 02-002 POM copolymer Injection molding type, modified with PTFE; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance…
About Celcon® acetal copolymer grade M270TM is a lower molecular weight, high – flow grade designed for superior moldability in multi-cavity, intricate or hard to fill molds applications. Chemical abbreviation according to ISO 1043-1: POM Please also see Hostaform® C…
About Product Description Generic Copolymer Polyformaldehyde Material Status Commercial: Negative Features High Viscosity Technical Data PHYSICAL Nominal value Unit Test method Density 1.41 g/cm³ ASTM D792 Water absorption rate 23℃，60%RH 0.22 % ASTM D570 Melt Flow Rate 9 g/10min ASTM…
About Product Description Supplier Polyplastics Generic Copolymer Polyformaldehyde Material Status Commercial: Active Availabilitys North America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 190℃，2.16kg 8.9 g/10min ISO 1133 MECHANICAL Nominal value Unit Test method tensile strength…
About Product Description Supplier Polyplastics Generic Copolymer Polyformaldehyde Material Status Commercial: Negative Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the…
About Product Description Supplier Celanese Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features Good Rigidity,Chemical coupling,Copolymer,HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.41 g/cm³ ISO 1183 Melt Volume…
About Medium-low viscosity, high strength, moderate toughness improved grade.F25-03HT is suited for application that is required of moderate toughness or noise reduction.&& Product Description Supplier Korea Engineering Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features Good Rigidity,Good flexibility,Good wear resistance…
About Tenac™-C HC750 is an Acetal (POM) Copolymer product. It is available in Africa & Middle East, Asia Pacific, Europe, or North America. Applications of Tenac™-C HC750 include engineering/industrial parts and housings. Characteristics include: Flame Rated Copolymer Low Viscosity&& Product…
About Kepital® TX-31 A polymer-modified wear-resistance grade (an easy-flow grade) for general injection molding Suitable for applications requiring reduced noise and a strong friction and wear resistance without sacrificing mechanical properties&&Kepital® TX-31 Low viscosity, lubricant pacakge grade. TX-31…
About Product Description Supplier Korea Engineering Generic Copolymer Polyformaldehyde Material Status Commercial: Active Features High impact resistance,Soft Technical Data PHYSICAL Nominal value Unit Test method Density 1.34 g/cm³ ISO 1183 Melt Flow Rate 190℃，2.16kg 5.0 g/10min ISO 1133 Water absorption…
About Kepital® F25-03H A medium-low viscosity grade for general injection molding It has a high stiffness compared to general POM copolymer.&&Kepital® F25-03H Medium-low viscosity grade with higher stiffness and strength than standard KEPITAL maintaining acetal copolymer’s inherent characteristics.&&…