About Polypropylene impact copolymer. The base resin meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520(a)(3)(i) and c)3.1a. The adjuvants meet their respective FDA regulations and 21 CFR 177.1520(b). In summary, this resin…

About Moplen HP3175 is a polypropylene homopolymer. Moplen HP3175 is suitable for injection moulding applications and can also be used in technical compounds as a base resin. It has a high melt flow rate and it is supplied in pelletized…

About Ferro PP TPP30AE39BK is a Polypropylene Homopolymer (PP Homopolymer) product filled with 30% talc. It is available in Latin America or North America. Primary characteristic: homopolymer.&& Product Description Supplier Ferro Generic PP homopolymerization Material Status Commercial: Active Features Homopolymer…

About Advanced-PP 1101 R is a propylene homopolymer for the production of bulk continues filament (BCF) & non wovens (NWS) with resistance to gas fading. Application BCF / CF, Non wovens, staple fibres. Regulatory Information: The Grade Advanced-PP 1101R and…

About Provisional – PP Homopolymer for fiber applications PP 518A is a PP homopolymer with broad molecular weight distribution intended for fiber extrusion applications. PP 518A has following features: Consistent processability Good thread line stability Good gas fading resistance Typical…

About COSMOPLENE® SF244 is Polypropylene Homopolymer resin developed for battery separator film application. COSMOPLENE® SF244 is a high purity resin with high isotacticity and low ash content It does not contain slip, antiblock nucleating and antistatic additives. APPLICATIONS: COSMOPLENE® SF244…

About Daelim Po1y® PP-164 is a Polypropylene Homopolymer (PP Homopolymer) product. It can be processed by injection molding and is available in Asia Pacific or Europe. Primary characteristic: food contact acceptable.&& Product Description Generic PP homopolymerization Material Status Commercial: Active…

About KM-004FH is a homo polypropylene for casting film. KM-004FH show good slipperiness and high transparency. Food Contact Application: KM-004FH meets the FDA requirements in the Code of Federal Regulations in CFR 177.1520 for food contact. Characteristics: Good Slipperiness High…

About PP 828-01 Natural is a molding grade impact polypropylene. This material meets the FDA Regulation 177.1520 for fod contact applications.&& Product Description Supplier A. Schulman Generic PP homopolymerization Material Status Commercial: Active Features Good heat aging resistance,Food contact compliance,Impact…

About PP 3480 is a high flow, medium impact copolymer polypropylene suitable for injection molding applications which require a material with the following properties.&& Product Description Supplier A. Schulman Generic PP homopolymerization Material Status Commercial: Active Features High liquidity,Impact copolymer…

About TIPPLEN H 781 F is a homopolymer polypropylene with high molecular weight and very good mechanical properties. The product shows excellent processability in extrusion applications. TIPPLEN H 781 F is recommended for extrusion of sheets, profiles, straps, and small…

About Jampilen HP557N is a medium-high fluidity homopolymer designed for the production of staple fibers and exhibits excellent antigasfading properties. Jampilen HP557N offers high process stability and good thermal-bonding ability. Jampilen HP557N is mainly used for the production of staple…

About Jampilen HP532J is a heat and detergent resistant polypropylene homopolymer. The product is designed for injection molding items which are subject to severe environmental conditions as well as extruded tapes and raffia. Jampilen HP532J offers good processability and finished…

About Product obtained by polymerization of propylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation resistance during PP production, processing and use of PP-made articles. Application: injection molded articles for industrial and household use,…

About Moplen H270F is a Polypropylene Homopolymer (PP Homopolymer) material. It is available in Asia Pacific. Important attributes of Moplen H270F are: Food Contact Acceptable Good Aesthetics Good Processability High Stiffness High Strength Typical applications include: Film Food Contact Applications&&…

About The pellet product is colourless and in the shape of a cylinder with anti-blocking, high anti-static, high light transmittance, good mechanical performance and printability, stress-fracture resistant, excellent chemical stability, as well as fairly good heat-resistance. Scope of Application: Casting…

About CERTENE™   PHM-12 PHM-12 is a certified prime grade Polypropylene designed for injection molding of general purpose applications. PHM-12 combines a good balance of medium-high flow processability with good tensile strength, high stiffness and good contact clarity. PHM-12 applications…

About PP homo Compound, 20% glass bead reinforced&& Product Description Generic PP homopolymerization Material Status Commercial: Active Features Homopolymer Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.02 to 1.06 g/cm³ ISO 1183 Melt Flow Rate 230℃，2.16kg…

About LyondellBasell Australia’s polypropylene grade HP548S is a high flow homopolymer with a modified molecular weight distribution. It is formulated with a general-purpose additive package and nucleant. HP548S has been formulated for use in thin walled packaging containers, caps and…

About H12Z-00 is a nucleated and antistatic polypropylene homopolymer designed for injection molding applications such as caps and closures, consumer products, furniture, housewares, and rigid packaging. The grade benefits from fast cycle times, high stiffness, and low static charge. This…