About Product Description Supplier Idemitsu Generic PP not specified Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of…
About Sindustris PP SH5301 is a Polypropylene material. It is available in Asia Pacific for injection molding. Typical application of Sindustris PP SH5301: Engineering/Industrial Parts&& Product Description Generic PP not specified Material Status Commercial: Active Availabilitys Asia Pacific Process Methods…
About SABIC® PPCOMPOUND 9712 is a mineral filled, impact modified polypropylene TPO. This material combines high impact resistance, scratch resistance, and heat stability with interior automotive UV stability. This material can exhibit ductility at temperatures as low as -30 degrees…
About Material code according to ISO 1043-1: PP Polypropylene with 30 weight percent ash content, long glass fibers reinforced. Impact modified, copolymer. The fibers are chemically coupled to the polypropylene matrix. The pellets are cylindrical and normally as well as…
About Product Description Supplier LG Chemical Generic PP not specified Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer…
About Product Description Generic PP not specified Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…
About Product Description Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Mass flow rate of solution 2.5 g/10min GB/T 3682-2000 THERMAL Nominal value Unit Test method Load deformation temperature 0.45MPa 77 ℃…
About PP-EPDM-T10&& Product Description Supplier Kingfa Generic PP not specified Material Status Commercial: Active Features Good Rigidity,Weather resistance is good,High liquidity,HB Availabilitys Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 0.960 to 1.00…
About Product Description Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 18.8 g/10min Shrinkage rate 1.3 % MECHANICAL Nominal value Unit Test method tensile strength 24 MPa Bending modulus…
About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. Value Product – Glass Fiber – Chemically…
About LNP STAT-KON MD000I is a compound based on Polypropylene resin. Added features of this material include: Electrically Conductive, High Impact.&& Product Description Supplier SABIC Generic PP not specified Material Status Commercial: Active Features High impact resistance,Conductive Availabilitys Europe Process…
About Product Description Supplier LG Chemical Generic PP not specified Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer…
About Product Description Supplier LG Chemical Generic PP not specified Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer…
About Product Description Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt mass flow rate 11.8 g/10min optical performance Nominal value Unit Test method Haze 8.2 % MECHANICAL Nominal value Unit Test…
About Kingfa GFPP-40 is a Polypropylene material filled with 40% glass fiber. It is available in Asia Pacific or North America for injection molding. Important attributes of Kingfa GFPP-40 are: Flame Rated Chemically Coupled Good Aesthetics Good Dimensional Stability Heat…
About Borcom WE007AE is a polypropylene microcomposite intended for injection moulding. The product is available in natural colour. This material has an excellent balance between impact strength and stiffness and gives a good surface quality.&& Product Description Supplier Borealis AG…
About 5003S(+) is low halogen flame retardant PP with phosphorus, nitrogen and bromine as main flame retardant elements. It improves flame retardant efficiency by synergistic effect of solidifying phase and gas-phase mechanism,and accelerating melting and dripping by catalytic mechanism to…
About Daplen EF119AE is a mineral filled elastomer modified polypropylene compound intended for injection moulding. This material has excellent balanced mechanical properties, gives a good surface quality and is easy to process. Applications Daplen EF119AE has been developed especially for…
About Mineral – Flame Retardant – Non-PBB/PBDE&& Product Description Generic PP not specified Material Status Commercial: Negative Features Flame Characteristics,V-0,5VA Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test…
About Kingfa PP-R009是一种聚丙烯材料,。 该产品在北美洲或亚太地区有供货,。 Kingfa PP-R009的主要特性有: 阻燃/额定火焰 Flame Retardant 高流动性 紫外线稳定 Kingfa PP-R009的典型应用领域为:电气/电子应用&& Product Description Supplier Kingfa Generic PP not specified Material Status Commercial: Active Features High liquidity,Flame Characteristics Availabilitys North America,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test…