About RANPELEN SEP-550是一种聚丙烯无规共聚物树脂，用于可发泡聚丙烯（EPP）珠粒泡沫生产。该等级用于传统的小型颗粒加工，适用于各种EPP产品。 SEP-550在气压成型过程中提供气压，模塑制品提供极佳的热焊接性能和刚度，弹性和高抗冲击性。 Product Description Supplier LOTTE Generic PP not specified Material Status Commercial: Active Features High impact resistance Technical Data PHYSICAL Nominal value Unit Test method Density 0.90 g/cm³ ASTM D792 Melt Flow Rate 7.5 g/10min ASTM D1238…
About SABIC® STAMAX 20YM240 is a 20% long glass fiber reinforced grade. The glass fibres are chemically coupled to the PP matrix, resulting in high stiffness and strength.&& Product Description Supplier SABIC Generic PP not specified Material Status Commercial: Active…
About Product Description Generic PP not specified Material Status Commercial: Active Features Heat Resistance, Good,HB Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 23℃ 1.20 g/cm³ GB/T 1033 Melt Flow Rate 230℃，2.16kg 4 g/10min GB/T 3682…
About Daplen EG134AE is a mineral filled elastomer modified polypropylene compound intended for injection moulding. This material has excellent balanced mechanical properties, gives a good surface quality and is easy to process. Applications Daplen EG134AE has been developed especially for…
About Daicel PP FP994 is a Polypropylene material filled with 25% glass fiber. It is available in Asia Pacific. Primary attribute of Daicel PP FP994: Flame Rated.&& Product Description Supplier Daicel Generic PP not specified Material Status Commercial: Active Features…
About Modified homopolymer PP for injection moulding, chemically reinforced with 30% glass fibre, contains the modifier of mechanical properties. Increased strength in comparison with unfilled PP. Applied in all industry branches. Increased strength, toughness, modulus in tension due to the…
About Product Description Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt flow rate 2.16kg,230℃ 28.7 g/10min GB/T 3682 MECHANICAL Nominal value Unit Test method Tensile yield stress 28 MPa GB/T 1040.2…
About Product Description Supplier LG Chemical Generic PP not specified Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer…
About Product Description Supplier Kolon Generic PP not specified Material Status Commercial: Active Availabilitys North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.31 g/cm³ ASTM D792 Shrinkage rate 0.10 ~ 0.30 % ASTM D955 Fiberglass…
About Description High Gloss Application Electrical & Electronic Parts&& Product Description Supplier LG Chemical Generic PP not specified Material Status Commercial: Active Features Good surface appearance Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value…
About PRE-ELEC® PP 1381 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. PRE-ELEC® PP 1381 contains a high load of carbon black and it can be diluted up to 50% with…
About Product Description Supplier Aramco Generic PP not specified Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of…
About Sindustris PP GP1001FC is a Polypropylene material. It is available in Asia Pacific for injection molding. Important attributes of Sindustris PP GP1001FC are: Flame Rated Flame Retardant Typical applications include: Automotive Electrical/Electronic Applications&& Product Description Generic PP not specified…
About Product Description Supplier YunTianHua Generic PP not specified Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of…
About Product Description Supplier Maoming Generic PP not specified Material Status Commercial: Active Features Good Tensile Strength Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 3 g/10min MECHANICAL Nominal value Unit Test method tensile strength yield 30…
About PP long glass fiber 30%, low emission Applications: injection molding, automotive & electronics&& Product Description Generic PP not specified Material Status Commercial: Active Features Low odor Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value…
About KOPLA PP KPT1020 is a Polypropylene material filled with 20% mineral. It is available in Asia Pacific. Important attributes of KOPLA PP KPT1020 are: Flame Rated Good Dimensional Stability Typical applications include: Automotive Electrical/Electronic Applications Housings&& Product Description Supplier…
About Product Description Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 2.16kg load 3.75 g/10min GB/T 3682 Isometric index 97 GB/T 2412 MECHANICAL Nominal value Unit Test method Tensile…
About RIALENE P 100 SGF20 ST F V-0 natural is a semi-crystalline thermoplastic construction material based on polypropylene (PP), reinforced with 20 % special glass fiber (SGF) which is optimized linked to the polymer matrix. RIALENE P 100 SGF20 ST…
About Product Description Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 230℃，2.16 kg 1500 g/10min ISO 1133-1 Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all…