About Product Description Generic PP not specified Material Status Commercial: Negative Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 19.0-26.9 g/10min SH/T 1761.1-2008 Isometric index 实测 % SH/T 1761.1-2008 ash content ＜350 mg/kg SH/T 1761.1-2008 Apparent density…

About Value Product – Mineral&& Product Description Generic PP not specified Material Status Commercial: Negative Features HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.05…

About Description General Purpose Application Electrical & Electronic, Automotive Parts&& Product Description Supplier LG Chemical Generic PP not specified Material Status Commercial: Active Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density…

About Armlen® PP SM 20-4UP is a Polypropylene product filled with mineral. It is available in Europe.&& Product Description Generic PP not specified Material Status Commercial: Active Features noise reduction Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method…

About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade.&& Product Description Generic PP not specified Material…

About Medical grade Propylux HS is made from an FDA approved polypropylene resin. Through a unique heat-stabilizing process, the extruded material is able to withstand higher temperatures with less water absorption than standard polypropylene. Recommended sterilization techniques for Propylux HS…

About PP-T20&& Product Description Supplier Kingfa Generic PP not specified Material Status Commercial: Active Features Weather resistance is good,Excellent Processability Availabilitys Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.03 to 1.07 g/cm³…

About Product Description Supplier LG Chemical Generic PP not specified Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer…

About TIPP TI-610是一种用于吹塑应用的聚丙烯，它具有良好的加工性，高透明度，良好的耐化学性。 它可用于透明瓶，洗涤剂和化妆品瓶，文具和食品包装 它是一种“不含邻苯二甲酸盐”的树脂。 Product Description Supplier LOTTE Generic PP not specified Material Status Commercial: Active Features Excellent Processability,Good Clarity,Solvent resistance Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 0.9 g/cm³ ASTM D792 Melt Flow…

About Kingfa HG-168A182 is a Polypropylene material. It is available in Asia Pacific or North America for injection molding. Important attributes of Kingfa HG-168A182 are: Flame Rated Heat Resistant Typical application of Kingfa HG-168A182: Appliances&& Product Description Supplier Kingfa Generic…

About Description General Purpose Application Electrical & Electronic, Automotive Parts&& Product Description Supplier LG Chemical Generic PP not specified Material Status Commercial: Active Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method…

About Description High Impact, Good Weatherability Application Automotive Exterior(Bumper Fascia , Rear Bumper Step)&& Product Description Supplier LG Chemical Generic PP not specified Material Status Commercial: Active Features Weather resistance is good,High impact resistance Availabilitys North America,Latin America,Asia Pacific,Europe Process…

About SABIC® STAMAX 30YM243 is a 30% long glass fiber reinforced UV stabilised grade. The glass fibres are chemically coupled to the PP matrix, resulting in high stiffness and strength.&& Product Description Supplier SABIC Generic PP not specified Material Status…

About Description General Purpose Application Automotive Interior Parts&& Product Description Supplier LG Chemical Generic PP not specified Material Status Commercial: Active Features HB Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method…

About Caltex PP MU42 is a Polypropylene material. It is available in Asia Pacific. Important attributes of Caltex PP MU42 are: Flame Rated Flame Retardant Heat Resistant Typical applications include: Appliances Electrical/Electronic Applications&& Product Description Supplier GS Caltex Generic PP…

About Material code according to ISO 1043-1: PP Polypropylene with 60 weight percent ash content, long glass fibers reinforced The fibers are chemically coupled to the polypropylene matrix. The pellets are cylindrical and normally as well as the embedded fibers…

About TIPP TI-640是一种用于挤出成型的聚丙烯，尤其是薄膜和片材，同时具有优异的透明度和高冲击强度。 它具有良好的加工性，高透明度，优异的冲击强度，良好的耐化学性和抗应力白化性。它可用于一般CPP薄膜，食品包装，蒸煮袋和装饰膜。 它是一种“不含邻苯二甲酸盐”的树脂。 Product Description Supplier LOTTE Generic PP not specified Material Status Commercial: Active Features Excellent Processability,Good Clarity,High impact resistance,Solvent resistance,High ESCR Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 0.9 g/cm³ ASTM…

About Caltex PP HT43 is a Polypropylene material. It is available in Asia Pacific. Important attributes of Caltex PP HT43 are: Flame Rated Flame Retardant Heat Resistant High Gloss High Stiffness Typical applications include: Appliances Automotive Electrical/Electronic Applications&& Product Description…

About AKROLEN® PP GFM 25/15 black (1415) is a 25% glass fibre reinforced, 15% mineral-filled polypropylene with good surface and dimensional stability Thin wall housings for electronic parts in the automotive industry with operation temperatures up to 100°C&& Product Description…

About Globalene® 7520 is a Polypropylene material. It is available in Asia Pacific or North America for injection molding. Primary attribute of Globalene® 7520: High Flow. Typical applications include: Consumer Goods Containers&& Product Description Supplier Lee Chang Yung Generic PP…