About Product Description Supplier LG Chemical Generic PP not specified Material Status Commercial: Active Features Flame Characteristics Availabilitys North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.0 ASTM D792 Melt Flow Rate 230℃，2.16kg 16 g/10min…

About 高刚性，纵横收缩均匀，表面佳，耐热性，尺寸稳定性。仪表板，内值饰板，排油烟机之边套板，灯罩，家电产品零件。 强化 PP 因具有价格低廉、成形容易、机械强度均衡、电气性质优良、耐水、耐热水性 优良等特性。但是在不同的产品结构设计与肉厚下，强度、配向性、收缩率、产品翘曲 度等影响更需考虑。 Product Description Supplier Nan Ya Generic PP not specified Material Status Commercial: Active Features Good Electrical Properties,Low or no water absorption,Quick molding cycle,Low density,Heat Resistance, Good,Good Rigidity Availabilitys Asia Pacific Technical Data PHYSICAL…

About Product Description Supplier WOTE Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 0.9 g/cm³ ISO 1183 ash content 800-900℃ 150 ppm ISO 3451 Melt Flow Rate 230℃，2.16kg 1450 g/10min ISO…

About TIPP TI-620M是一种新型的无规聚丙烯，具有高冲击强度。 它还具有高光泽度，透明度和出色的铰链性能。 该产品适用于注射拉伸吹塑设备。 它是一种“不含邻苯二甲酸盐”的树脂。 Product Description Supplier LOTTE Generic PP not specified Material Status Commercial: Active Features Good Clarity,Good surface appearance,High impact resistance Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 0.9 g/cm³ ASTM…

About LNP* Verton* Compound MV00ASUV_WH9D703是用50％长纤维单色颗粒填充PP的化合物。 Product Description Supplier SABIC Generic PP not specified Material Status Commercial: Active Features Good Rigidity,Good flexibility,High impact resistance,Good wear resistance Availabilitys North America Technical Data MECHANICAL Nominal value Unit Test method tensile strength Fracture, 5…

About TIPP TI-625是一种用于吹塑成型的聚丙烯，它具有良好的加工性，高透明度，优异的冲击强度，良好的耐化学性和抗应力白化性。 它可用于透明瓶，清洁剂和化妆品瓶，文具和食品包装。 它是一种“不含邻苯二甲酸盐”的树脂。 Product Description Supplier LOTTE Generic PP not specified Material Status Commercial: Active Features Excellent Processability,Good Clarity,High impact resistance,Solvent resistance Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 0.9 g/cm³ ASTM D792…

About SABIC® STAMAX 60YM240 is a 60% long glass fiber reinforced polypropylene concentrate, specially developed for dilution with SABIC®PP homopolymer. The glass fibers are chemically couplied to the PP matrix, resulting in high stiffness and strength. The IMDS is 16501821.&&…

About SABIC® STAMAX 30YM241 is a high heat 30% long glass fiber reinforced grade. The glass fibres are chemically coupled to the PP matrix, resulting in high stiffness and strength.&& Product Description Supplier SABIC Generic PP not specified Material Status…

About Description Low Warpage Application Electrical & Electronic, Automotive Parts&& Product Description Supplier LG Chemical Generic PP not specified Material Status Commercial: Active Features Low warping,HB Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value…

About 20% Mineral reinforced&& Product Description Supplier Ginar Technology Generic PP not specified Material Status Commercial: Negative Features HB Availabilitys Africa & Middle East ,North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density…

About Product Description Supplier LOTTE Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density 0.9±0.01 g/cm³ ISO 1183 Melt Flow Rate 1500±200 g/10min ISO 1133 Notes 【 Disclaimer 】 Guangzhou Soliao Information…

About Product Description Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 230℃，2.16 kg 1500 g/10min GB/T 3682 THERMAL Nominal value Unit Test method melting point 165 ℃ GB/T 19466…

About Product Description Supplier Maoming Generic PP not specified Material Status Commercial: Active Features Good Rigidity,High liquidity Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 25 g/10min MECHANICAL Nominal value Unit Test method tensile strength yield 30…

About Product Description Generic PP not specified Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…

About Description Non-flammable PP, FH44, FH44C, and FH44N, are high heat-resist and non-flammable PP that does not contain Dioxins, which cause environmental problems and harmfulness to human body, and provide excellent and stable non-flammability even with thinking about human and…

About Description General Purpose, Flame Retardant Application Electrical & Electronic, Automotive Parts&& Product Description Supplier LG Chemical Generic PP not specified Material Status Commercial: Active Features Flame Characteristics,V-2 Availabilitys North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test…

About Description General Purpose, Flame Retardant Application Electrical & Electronic, Automotive Parts&& Product Description Supplier LG Chemical Generic PP not specified Material Status Commercial: Active Features Flame Characteristics,V-0 Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL…

About Tekucom SC GF 20 C is a Polypropylene material filled with 20% glass fiber. It is available in Europe. Primary attribute of Tekucom SC GF 20 C: Flame Rated.&& Product Description Generic PP not specified Material Status Commercial: Active…

About Product Description Generic PP not specified Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material…

About Product Description Supplier Aramco Generic PP not specified Material Status Commercial: Active Features Low contractility,Good tear strength Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 230℃，2.16kg 15 g/10min ASTM D1238 Density 0.9 g/cm³…