About Product Description Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 90-110 g/10min GB/T 3682-2000 ash content ≤0.025 % GB/T 9345.1-2008 Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology…
About Product Description Generic PP not specified Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density THERMAL Nominal value Unit Test method MECHANICAL Nominal value Unit Test method Electrical performance Nominal value Unit Test method Notes…
About Modified homopolymer PP for injection moulding with the content of 20% mineral filling. Increased rigidity, strength and thermal use up to 130°C depending on the talc content. Decreased shrinkage. General application in all industry branches – packing material, garden…
About Sindustris PP H7412 is a Polypropylene material. It is available in Asia Pacific. Typical applications include: Fabrics/Fibers Yarn&& Product Description Generic PP not specified Material Status Commercial: Active Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method…
About SABIC® PPcompound G1120U is a 20% short glass fiber reinforced and UV stabilized Polypropylene. The base material is a PP homopolymer optimized for good creep resistance. The glass fibres are hydrolytically stable and are chemically coupled to the PP…
About Product Description Generic PP not specified Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method Izod notched impact strength 优级｜一级｜合格≥17.0｜≥17.0｜≥17.0 J/m Tensile yield strength 优级｜一级｜合格≥31｜≥30｜≥28 MPa Rockwell hardness 优级｜一级｜合格≥95｜≥95｜≥95 R标尺 THERMAL Nominal value Unit Test method…
About Hostacom TYS1365NC NH533 BLK is a high melt flow, unfilled, UV stabilised, flexible olefin compound. The product has been developed for industrial and automotive applications where a combination of good processability and excellent softness is required. This grade is…
About Extron 3011 HS is a 45% glass fibre reinforced coupled polypropylene compound. It is a medium to high flow injection moulding grade developed for components requiring excellent creep resistance with high heat deflection temperatures, very high rigidity and good…
About TECHLEN ST900 is a Polypropylene material. It is available in Asia Pacific. Primary attribute of TECHLEN ST900: Scratch Resistant. Typical application of TECHLEN ST900: Automotive&& Product Description Generic PP not specified Material Status Commercial: Active Features High scratch resistance…
About SABIC® PPcompound 2500/4 is a mineral filled modified polypropylene. Typical material properties include high flow, very high impact, good stiffness, low shrinkage and CLTE. Typical applications of this grade are in automotive exterior such as automotive bumpers. It can…
About Caltex PP MT42FC is a Polypropylene material. It is available in Asia Pacific.&& Product Description Supplier GS Caltex Generic PP not specified Material Status Commercial: Active Features Sprayable Availabilitys Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method…
About LNP VERTON* MV00AS is a compound based on Polypropylene resin containing Long Glass. Added features of this material include: Chemically Coupled.&& Product Description Supplier SABIC Generic PP not specified Material Status Commercial: Active Features Chemical coupling Availabilitys Europe Process…
About ECOGRAN® PP 50/50 is a Polypropylene material. It is available in Europe for injection molding. Primary attribute of ECOGRAN® PP 50/50: Good Processability.&& Product Description Generic PP not specified Material Status Commercial: Active Features Excellent Processability Availabilitys Europe Process…
About Talc&& Product Description Generic PP not specified Material Status Commercial: Negative Features HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 0.980 g/cm³ ASTM D792…
About Advanced Composites ATX913-2 is a Polypropylene product. It is available in North America. Characteristics include: Impact Resistant Scratch Resistant&& Product Description Generic PP not specified Material Status Commercial: Active Features High impact resistance,High scratch resistance Availabilitys North America Technical…
About Wondel® P PG8 is a Polypropylene material filled with 40% glass fiber. It is available in Asia Pacific. Primary attribute of Wondel® P PG8: Flame Rated. Typical application of Wondel® P PG8: Automotive&& Product Description Supplier Julong Generic PP…
About Fibremod GD301FE is a 30 % chemically coupled high performance glass fibre reinforced polypropylene compound intended for injection moulding. This material shows excellent mechanical properties also at elevated temperatures. The product is available in standard black 9502. Applications Fibremod…
About COPOLYMER POLYPROPYLENE&& Product Description Supplier EnCom Generic PP not specified Material Status Commercial: Active Features Copolymer Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Extrusion Technical Data PHYSICAL Nominal value Unit Test method Density 0.898 g/cm³…
About Caltex PP MT62CS is a Polypropylene material. It is available in Asia Pacific. Primary attribute of Caltex PP MT62CS: Scratch Resistant. Typical application of Caltex PP MT62CS: Engineering/Industrial Parts&& Product Description Supplier GS Caltex Generic PP not specified Material…
About HiPrene® MT42IN is a 20% mineral filled, elastomer modified polypropylene compound suitable for injection moulding. This material has very good impact/stiffness balance and it’s easy to process. This material is paintable and is primarily designed to automotive interior parts…