About Polyphthalamide based on PA 10T VESTAMID HTplus M3000 nc is a natural colored PA 10T-based copolyamide. PA 10T is a polycondensation product of 1,10-decamethylene diamine (10) and terephthalic acid (T). As 1,10-decamethylene diamine is derived from castor oil, VESTAMID…
About Product Description Supplier TBT Generic PPA Material Status Commercial: Active Technical Data IMPACT Nominal value Unit Test method Charpy Notched Impact Strength 9.0 kJ/m² ISO 179/1eA MECHANICAL Nominal value Unit Test method Bending modulus 8545.3 MPa GB/T 1419-1996 tensile…
About AKROMID® T1 GF 50 black (3101) is a 50% glass fibre reinforced polyphthalamide with very high rigidity and strength, as well as high temperature and chemical resistance Parts with tight dimensional tolerances even under high mechanical load.&& Product Description…
About Glass Fiber&& Product Description Generic PPA Material Status Commercial: Negative Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.22 g/cm³ ASTM D792 Shrinkage rate MD：3.2…
About 30% GLASS FIBER REINFORCED PPA&& Product Description Generic PPA Material Status Commercial: Active Features Good Rigidity,Good heat aging resistance,Good flexibility,High impact resistance,Good Dimensional Stability,High liquidity,Fatigue resistance,Heat Resistance, Good,HB Availabilitys North America Technical Data PHYSICAL Nominal value Unit Test method…
About 30% Glass Reinforced, Flame Retardant, Non-Halogenated, PPA, High Performance Polyamide with Improved Reflow Soldering Performance&& Product Description Supplier DuPont Generic PPA Material Status Commercial: Active Features Halogen free,Flame Characteristics Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process…
About AKROMID® T1 GF 40 natural (3463) is a 40% glass fibre reinforced polyphthalamide with high rigidity and strength, as well as high temperature and chemical resistance and light inherent color Parts with tight dimensional tolerances even under high mechanical…
About PTFE Lubricated&& Product Description Generic PPA Material Status Commercial: Negative Features Lubricating,HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.36 g/cm³ ASTM D792 Shrinkage…
About 45% Glass Reinforced, PPA, High Performance Polyamide&& Product Description Supplier Celanese Material Status Commercial: Active Features Heat Stabilized Availabilitys Europe,North America,Africa & Middle East ,Asia Pacific,Latin America Process Methods Injection Molding Technical Data MECHANICAL Nominal value Unit Test method…
About Amodel® A-1130 FW is a 30% glass-fiber reinforced polyphthalamide (PPA) grade containing a solid lubricant. This resin was designed for moderate-pressure, low-velocity friction and wear applications. Black: A-1130 FW BK 324&& Product Description Supplier Solvay Generic PPA Material Status…
About High Temperature Nylon&& Product Description Generic PPA Material Status Commercial: Active Features High impact resistance,Hydrolysis stability,Heat Stabilized,HB Availabilitys North America Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.42 g/cm³ ASTM D792 Shrinkage rate…
About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade.&& Product Description Generic PPA Material Status Commercial:…
About Glass-fiber reinforced polyphthalamide compound especially suitable for plastic and rubber composites. VESTAMID HTplus R1133 is a glass-fiber reinforced (30%), heat-stabilized polyphthalamide compound (PPA) especially suitable for the production of rubber and plastic composites. This process is patented by Evonik…
About Amodel® DW-1130 is a 30% glass-fiber-reinforced resin designed for high strength and stiffness and improved hydrolytic stability. This material has low moisture absorption and a low coefficient of thermal expansion, which means excellent dimensional stability. Creep resistance is also…
About Amodel® ET-1000 HS is an impact modified, heat stabilized polyphthalamide (PPA) that exhibits exceptional impact strength and toughness. Like all Amodel® PPA resins, ET-1000 HS offers high fatigue strength, good chemical resistance and high mechanical property retention over a…
About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. -Preliminary Product Data per RTP Co.-&& Product…
About Amodel® A-1933 HSL is a 33% glass reinforced grade of polyphthalamide (PPA) resin. This grade was developed specifically for improved performance in a 50/50 ethylene glycol and water environment. This material was tested using the aggressive automotive coolant system,…
About NHU-PPA N600 NHU-PPA Polymer is a polyamide-class high temperature nylon resin with high distortion temperature, excellent tenacity and frictional resistance. Featuring good melt flow rate, PPA resin boasts excellent injection molding processibility, acid, alkali and general chemical resistance…
About Unmodified polyphthalamide for creating compounds for injection molding VESTAMID HTplus M1000 is a neat resin for polyphthalamide (PPA) based compounds for injection molding. This base resin is especially suitable for manufacturing parts subjected to high temperature.&& Product Description Supplier…
About Carbon Fiber – PTFE Lubricated&& Product Description Generic PPA Material Status Commercial: Negative Features Lubricating,HB Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.42 g/cm³…