About Resin of LTP CT-1200 serials is a kind of engineering plastic with high performance based on PPS. For its outstanding thermal transmittance and insulation ability, life-time service around 180-220°C, the materials are suitable for produce varied shell or capsulation…
About Description Polyphenylene Sulfide Glass Fiber Reinforced Black Compound Product Applications High Performance plactic materials that are used a wide spectrum of applications Appliance, Automotive, Electric/Electronics, industrial & medical Technology etc Benefits Good combination between Mechanical and electrical properties. Exceptional…
About Fortron® 1140L4-T is a Polyphenylene Sulfide (PPS) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.&& Product Description Supplier Celanese Generic PPS Material Status Commercial: Active Availabilitys Africa & Middle East…
About Product Description Generic PPS Material Status Commercial: Active Features Solvent resistance Technical Data PHYSICAL Nominal value Unit Test method Density 1.75 g/cm³ ISO 1183 Water absorption rate 23℃，24 hr 0.02 % ISO 62 Shrinkage rate MD 0.3 % ISO…
About The representative products of G4 series is NHU-PPS G4010F/G4011F PPS. NHU-PPS G4010F/G4011F is 40% glass fiber enhanced linear PPS engineering plastics, compare to the general specification of PPS, they (NHU-PPS G4010F/G4011F) improved flow and reduce flash.&& Product Description Supplier…
About Product Description Material Status Commercial: Active Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes…
About Polyphenylene Sulphide (PPS) based compound. Carbon fibre. Very good chemical resistance. Very good thermal properties. Low smoke density and low toxicity index.&& Product Description Supplier LATI Generic PPS Material Status Commercial: Active Features Halogen free,High Heat Resistance,Solvent resistance,V-0 Availabilitys…
About PPS-hGR40 (natural color) and PPS-hGR41 (black) is glass reinforced PPS compound, which is filled with glass fiber based on the PPS resin. The characteristic of PPS compounds includes good mechanical properties, high creep resistance, high temperature resistance, friction resistance,…
About PPS – (GF30+SD15), 30% glasfibres and PTFE filled tribological injection moulding grade; Low friction and wear at high maximum service temperature&& Product Description Generic PPS Material Status Commercial: Active Features Low coefficient of friction,Heat Stabilized,V-0 Availabilitys Europe Process Methods…
About Nickel-Coated Carbon Fiber – Electrically Conductive – EMI/RFI Shielding&& Product Description Generic PPS Material Status Commercial: Negative Features Conductive,EMI,RFI,V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test…
About LNP* KONDUIT* OX11315 is a thermally conductive, electrically insulative, mineral filled PPS Flame Retardant compound.&& Product Description Supplier SABIC Generic PPS Material Status Commercial: Active Features Flame Characteristics,Thermal conductivity,Insulation,V-0,5VA Availabilitys North America,Asia Pacific Process Methods Injection Molding Technical Data…
About Stand Low flash&& Product Description Supplier Shunde Hones Generic PPS Material Status Commercial: Active Features Low flash,V-0 Availabilitys Asia Pacific Technical Data MECHANICAL Nominal value Unit Test method tensile strength 110 MPa Internal Method Tensile strain fracture 1.4 %…
About Product Description Supplier SUQING Material Status Commercial: Negative Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com.…
About Carbon & Aramid Fiber Reinforced – PTFE Lubricated&& Product Description Generic PPS Material Status Commercial: Negative Features Lubricating,V-0 Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method…
About 0205 is an easy flowing unfilled grade. It demonstrates excellent chemical resistance and thermal stability. Intended for compounding with various fillers. Available standard in pellet (0205P4) and powder (0205B4) form.&& Product Description Supplier Celanese Generic PPS Material Status Commercial:…
About For its high rigidity and excellent combination properties, PPS is ideal materials of automobile for light weight. For varied function of parts, PPS for automobile is required to have high rigidity, high stiffness, high toughness, resistance to abrasion, corrosion…
About LTP 8100 serials is reinforced composite materials with high performance based on polyolefin and PPS, and are extensively applied in injection mold to structure and parts of machine, electric appliance and automobiles. It is used to replace materials of…
About The Poticon series features a potassium titanate micro-filler compounded in thermoplastic resins to provide outstanding micro-reinforcement and dimensional stability. The excellent surface smoothness of these compounds limits friction toward opposing materials, reducing wear and allowing for greaseless applications. Moreover,…
About Lion Idemitsu Composites PPS K531A1 is a Polyphenylene Sulfide (PPS) product filled with 70% glassmineral. It is available in Asia Pacific. Characteristics include: Flame Rated Good Processability&& Product Description Supplier Lion Idemitsu Generic PPS Material Status Commercial: Active Features…
About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade.&& Product Description Generic PPS Material Status Commercial:…