About LUVOCOM® 1301-0824 is a Polyphenylene Sulfide (PPS) material filled with carbon fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of LUVOCOM® 1301-0824 are: Flame Rated…
About Product Description Generic PPS Material Status Commercial: Active Features High liquidity,Solvent resistance Technical Data PHYSICAL Nominal value Unit Test method Density 1.62 g/cm³ ISO 1183 Water absorption rate 23℃，24 hr 0.02 % ISO 62 Shrinkage rate MD 0.3 %…
About Warning: The status of this material is ‘Commercial: Limited Issue’ The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade.&& Product Description Generic PPS Material Status Commercial:…
About Resin of LTP ZW-3000 serials is crystal whisker reinforced materials with wear-resisting property based on high molecular weight linear PPS. Its characteristics are as following: (1)elevated temperature property: long run under 180-220°C; (2)self-lubricating property: work for long time without…
About ZENITE® SEA20N is a 40% mineral filled grade. It offers excellent surface appearance, low warpage, and excellent dimensional stability. Application for this grade is compact camera module, and other thin, small electronic parts&& Product Description Supplier Celanese Generic PPS…
About LNP* LUBRICOMP* OCP36 is a compound based on Polyphenylene Sulfide resin containing 30% Carbon Fiber, 15% PTFE Added features of this grade include: Internally Lubricated, Bearing Grade, Electrically Conductive.&& Product Description Supplier SABIC Generic PPS Material Status Commercial: Active…
About Ryton® QA200N (granular powder) unfilled polyphenylene sulfide exhibits excellent thermal stability and chemical resistance.&& Product Description Supplier Solvay Generic PPS Material Status Commercial: Active Features Solvent resistance,Heat Stabilized,V-0 Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data…
About PPS-SGM501T65 PPS is a 50% glass fiber and mineral reinforced linear polyphenylene sulfide compound developed to provide good engineering properties.&& Product Description Supplier Sciengy Generic PPS Material Status Commercial: Active Features Linear polymer structure Availabilitys Asia Pacific,Europe Process Methods…
About PPS-GF30, 30% glass fibres reinforced injection moulding grade&& Product Description Generic PPS Material Status Commercial: Active Features V-0 Availabilitys Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.52 g/cm³ ISO 1183 MECHANICAL Nominal…
About Fortron® MT9115L0 DW is a 15% fiberglass-reinforced grade of polyphenylene sulfide with high melt strength suitable for blow molding and extrusion applications.&& Product Description Supplier Celanese Generic PPS Material Status Commercial: Active Features Good melt strength Availabilitys Africa &…
About Glass fiber and mineral filled / Standard grade&& Product Description Supplier TOSOH Generic PPS Material Status Commercial: Active Features Good flexibility,V-0 Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.94…
About Product Description Supplier DIC Corporation Generic PPS Material Status Commercial: Active Features High impact resistance,Low odor,low-temperature impact resistance Availabilitys North America,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.67 g/cm³ ISO 1183 Water absorption rate 23℃，24hr…
About Product Description Supplier DIC Corporation Generic PPS Material Status Commercial: Active Features Good flexibility,High impact resistance,Low odor,low-temperature impact resistance Availabilitys North America,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.65 g/cm³ ISO 1183 Water absorption rate…
About Product Description Supplier Kotec Generic PPS Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 300℃，5kg 200-500 g/min melting point 270-280 ℃ volatility 150℃，1hr 0.02-0.03 % Heating reduction 370℃，1hr 0.6-0.3 % Ash Content…
About Product Description Supplier SUQING Material Status Commercial: Negative Features V-0 Technical Data PHYSICAL Nominal value Unit Test method Density 1.52 g/cm³ ISO 1183 Shrinkage rate Internal Method TD：3.0 mm 0.85 % Internal Method MD：3.0 mm 0.20 % Internal…
About DURAFIDE® 1130A64是一种聚苯硫醚(PPS)产品,含有的填充物为30% 玻璃纤维增强材料。 它,在北美洲、欧洲或亚太地区有供货。 主要特性为:阻燃/额定火焰。&& Product Description Supplier Polyplastics Generic PPS Material Status Commercial: Active Features Low flash Availabilitys North America,Asia Pacific,Europe Technical Data FLAME CHARACTERISTICS Nominal value Unit Test method Flame retardant level 0.38 mm V-0 UL 94…
About Product Description Supplier SUQING Material Status Commercial: Active Technical Data PHYSICAL Nominal value Unit Test method Density MECHANICAL Nominal value Unit Test method tensile strength Tensile strain fracture bending strength Bending modulus Notes 【 Disclaimer 】 Guangzhou Soliao Information…
About DURAFIDE® 3130A1 is a Polyphenylene Sulfide (PPS) product filled with 30% mineral. It is available in Africa & Middle East, Asia Pacific, Latin America, or North America. Characteristics include: Flame Rated Wear Resistant&& Product Description Supplier Polyplastics Generic PPS…
About Ryton® R-7-220BL glass fiber and mineral filled polyphenylene sulfide compound provides enhanced mechanical strength after constant or repeated exposure to high temperature water.&& Product Description Supplier Solvay Generic PPS Material Status Commercial: Active Features Good Rigidity Availabilitys North America,Latin…
About DIC.PPS FZ-1130 is a Polyphenylene Sulfide (PPS) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific or North America. Primary characteristic: flame rated.&& Product Description Supplier DIC Corporation Generic…