About DURAFIDE® 6165A7S is a Polyphenylene Sulfide (PPS) product filled with 65% glassmineral. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: chemical resistant.&& Product Description Supplier Polyplastics Generic PPS Material…
About Fortron 1141L4 is a 40% glass-reinforced PPS that has excellent heat and chemical resistance, inherently flame-retardant, high hardness and a good balance of strength and stiffness. This grade exhibits low flash and is typically used in applications with thicker…
About CoolPoly® E5101 is a Polyphenylene Sulfide (PPS) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: rohs compliant.&& Product Description Supplier Celanese Generic PPS Material Status Commercial: Active Features…
About Torelina® A400MX01 is a Polyphenylene Sulfide (PPS) product filled with 60% glassmineral. It is available in Asia Pacific, Europe, or North America. Typical application: Automotive. Characteristics include: Flame Rated High Flow&& Product Description Supplier Toray Material Status Commercial: Active…
About Torelina® A604-X95 is a Polyphenylene Sulfide (PPS) product filled with 40% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application: Electrical/Electronic Applications. Characteristics include: Flame Rated Good Toughness&& Product Description Supplier Toray Generic PPS…
About Good appearance, Low anisotropy&& Product Description Supplier Shunde Hones Generic PPS Material Status Commercial: Active Features V-0 Availabilitys Asia Pacific Technical Data MECHANICAL Nominal value Unit Test method tensile strength 90.0 MPa Internal Method Tensile strain fracture 1.0 %…
About Fitex PPS 1340L is a Polyphenylene Sulfide (PPS) product filled with 40% glass fiber. It is available in Europe or North America. Primary characteristic: flame rated.&& Product Description Supplier Kotec Generic PPS Material Status Commercial: Active Features V-0 Availabilitys…
About Ryton® R-4-242BL 40% glass fiber reinforced polyphenylene sulfide compound complies with United States Food and Drug Administration (FDA) and European Union (EU 10/2011 and 1183/2012) regulations for use as a component of articles intended for repeat use in contact…
About Ryton® QA220N (granular powder) unfilled polyphenylene sulfide exhibits excellent thermal stability and chemical resistance.&& Product Description Supplier Solvay Generic PPS Material Status Commercial: Active Features Solvent resistance,Heat Stabilized,V-0 Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data…
About Fortron® 1131L4是一种聚苯硫醚(PPS)产品,。 它,在北美洲、非洲和中东、拉丁美洲、欧洲或亚太地区有供货。 主要特性为:阻燃/额定火焰。&& Product Description Supplier Celanese Generic PPS Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.56 g/cm³ ISO 1183 Shrinkage rate TD…
About DURAFIDE® 2130A1 is a Polyphenylene Sulfide (PPS) product filled with 30% carbon fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated Conductive Wear Resistant&& Product Description Supplier…
About Fortron 6850L6 offers the lowest warpage available. The easy flowing nature allows this product to be injection molded into thin walled applications. The excellent balance of mineral and glass fibers result in a superior heat resistance and dimensional stability.…
About Product Description Supplier SUQING Material Status Commercial: Negative Technical Data Notes 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com.…
About TEDUR® L 9404-3.2 is a Polyphenylene Sulfide (PPS) product filled with 30% carbon fiber. It is available in Asia Pacific, Europe, or North America. Applications of TEDUR® L 9404-3.2 include automotive and electrical/electronic applications. Characteristics include: Flame Rated RoHS…
About Fortron 6165A6FC is an easier flow version of Fortron 6165A4 for use in food contact applications. It offers similar characteristics to the 6165A4.&& Product Description Supplier Celanese Generic PPS Material Status Commercial: Active Features Good liquidity Availabilitys Africa &…
About Torelina® A515 is a Polyphenylene Sulfide (PPS) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Characteristics include: Flame Rated Wear Resistant&& Product Description Supplier Toray Material Status Commercial: Active Features Good…
About ES-SG301E41 is a 30% glass fiber reinforced PPS & PTFE compound specially formulated to have a low coefficient of friction for use in low surface friction and cost-effective for clients&& Product Description Supplier Sciengy Material Status Commercial: Active Features…
About Low warpage, Good appearance&& Product Description Supplier Shunde Hones Generic PPS Material Status Commercial: Active Features Low warping,V-0 Availabilitys Asia Pacific Technical Data MECHANICAL Nominal value Unit Test method tensile strength 120 MPa Internal Method Tensile strain fracture 1.2…
About Fortron 4184L6 is an easier flow version of Fortron 4184L4. It offers similar characteristics to the 4184L4. This grade is especially used for thin walled parts requiring long flow lengths, stiffness and dimensional control. Applications made of this grade…
About Fortron 6450A6 is a fiberglass reinforced, mineral filled alloy that exhibits improved wear and sliding properties versus standard Fortron compounds.&& Product Description Supplier Celanese Generic PPS Material Status Commercial: Active Features Low coefficient of friction,Good wear resistance Availabilitys Africa…