About Fortron 1140L6FC is an easier flow version of Fortron 1140L4 made for food contact applications. It offers essentially the same characteristics of 1140L4. Especially used for thin walled parts with long flow lengths. Applications made of this grade include…
About A very easy flowing unfilled grade. This grade demonstrates excellent chemical resistance and thermal stability. Intended for extrusion applications that do not require high melt strength and for compounding with various fillers. Available as Fortron 0203B6 (granular powder), 0203P6…
About DURAFIDE® 6165A7 is a Polyphenylene Sulfide (PPS) product filled with 60% glassmineral. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated Good Dimensional Stability&& Product Description Supplier Polyplastics…
About Product Description Generic PPS Material Status Commercial: Active Features Solvent resistance Technical Data PHYSICAL Nominal value Unit Test method Density 1.67 g/cm³ ISO 1183 Water absorption rate 23℃，24 hr 0.02 % ISO 62 Shrinkage rate MD 0.3 % ISO…
About DIC.PPS FZ-820-DEFZ-820-DE是玻纤增强的冲击改性PPS复合材料，具有优异的与环氧树脂粘合性，耐冷热冲击性和良好的薄壁流动性。 Product Description Supplier DIC Corporation Generic PPS Material Status Commercial: Active Features High impact resistance Availabilitys North America,Asia Pacific Technical Data PHYSICAL Nominal value Unit Test method Density 1.42 g/cm³ ISO 1183 Water absorption rate 23℃，24hr 0.07…
About Product Description Supplier TOSOH Material Status Commercial: Negative Features Lubricating,Good Rigidity Technical Data THERMAL Nominal value Unit Test method Hot deformation temperature 0.45 MPa >260 ℃ ISO 75 1.8 MPa >260 ℃ ISO 75 TD 3.2 ISO 11359 MD…
About Product Description Supplier SUQING Material Status Commercial: Active Features High modulus,High strength Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.65 ASTM D792 Shrinkage rate MD 0.1-0.2 % ASTM D955 TD 0.1-0.2 % ASTM…
About CoolPoly D series of thermally conductive plastics transfers heat, a characteristic previously unavailable in injection molding grade polymers. CoolPoly is lightweight, netshape moldable and allows design freedom in applications previously restricted to metals. The D series is electrically non-conductive…
About Fortron® 1115L0 is a 15% fiberglass-reinforced grade of polyphenylene sulfide with high melt strength suitable for blow molding and extrusion applications. The recommended processing conditions are similar to those of our standard grades, except drying conditions are somewhat milder…
About Description General Purpose Application Pump, Motor Unit, Electric/Electronic Units, etc.&& Product Description Supplier LG Chemical Generic PPS Material Status Commercial: Active Availabilitys North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density…
About Ryton® BR42B 40% glass fiber reinforced polyphenylene sulfide compound is specially formulated to provide low coefficient of friction and reduced wear rate for use in applications requiring low surface friction and/or wear.&& Product Description Supplier Solvay Generic PPS Material…
About DURAFIDE® 6465A62 is a Polyphenylene Sulfide (PPS) product filled with 60% glass beadglass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated High Gloss Warp Resistant&& Product…
About Low flash, Excellent size accuracy&& Product Description Supplier Shunde Hones Generic PPS Material Status Commercial: Active Features Low flash,V-0 Availabilitys Asia Pacific Technical Data MECHANICAL Nominal value Unit Test method tensile strength 120 MPa Internal Method Tensile strain fracture…
About Product Description Supplier Kotec Material Status Commercial: Active Technical Data MECHANICAL Nominal value Unit Test method Tensile Strength Broken BRK 135 MPa ASTM D638 Flexural Strength 165 MPa ASTM D790 Flexural Modulus 10000 MPa ASTM D790 Rockwell hardness R-level…
About DURAFIDE® 6565A7 is a Polyphenylene Sulfide (PPS) product filled with 60% glassmineral. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated Good Adhesion&& Product Description Supplier Polyplastics Generic…
About Outline: CZL-2000 is a pitch based carbon fiber and poly tetra fluoro ethylene filled PPS compound that has excellent self lubricant performance with low wear, and low friction properties. Color: Black&& Product Description Supplier DIC Corporation Generic PPS Material…
About Fortron 4332L6 is a glass fiber/mineral filled injection molding grade, which is intended for applications requiring improved tensile and flexural properties, when compared to other GF/MIN reinforced PPS grades. The recommended processing parameters are similar to the standard grades.&&…
About 0320 exhibits a high melt strength for extrusion processes. The material demonstrates excellent heat and chemical resistance. The intended use of this product is for extruding monofilament/fibers, rod and slab. Available standard in powder (0320B0), pellet (0320P0) and crystallized…
About DURAFIDE® 6150T6 is a Polyphenylene Sulfide (PPS) product filled with 50% glassmineral. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: impact resistant.&& Product Description Supplier Polyplastics Generic PPS Material…
About 30% Glass Reinforced, Enhanced Mechanical Strength&& Product Description Supplier DSM Generic PPS Material Status Commercial: Active Features Good Rigidity Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test…