About RTP 900 is a Polysulfone (PSU) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of RTP 900: Flame Rated.&& Product Description Generic PSU Material Status…
About Udel® P-3703 is a high-flow grade of polysulfone intended for injection molding applications with thin walls or long flow lengths. This grade has higher flow than Udel® P-1700 and a slightly greater tendency to stress crack in some aggressive…
About Plaslube® PSU GF20 TL5 is a Polysulfone (PSU) product filled with 20% glass fiber. It can be processed by injection molding and is available in North America. Primary characteristic: lubricated.&& Product Description Generic PSU Material Status Commercial: Active Features…
About PARYLS® PSU F3250GL30 pellets are supplied in cartons lining aluminum foil bag, which can be stored indefinitely, provided the packaging remains undamaged. PARYLS® PSU F3250GL30 pellets absorb moisture very rapidly. Therefore, the pellets need to be dried at least…
About PARYLS® PSU F3250 pellets are supplied in cartons lining aluminum foil bag, which can be stored indefinitely, provided the packaging remains undamaged. PARYLS® PSU F3250 pellets absorb moisture very rapidly. Therefore, the pellets need to be dried at least…
About UNIFONE PSU (Polysulfone) is an amorphous high performance thermoplastic material that has proven performance at elevated temperatures. Good mechanical properties along with thermal stability allow for its use in load bearing applications over broad temperature ranges. Other notable attributes…
About PARYLS® PSU F3150 pellets are supplied in cartons lining aluminum foil bag, which can be stored indefinitely, provided the packaging remains undamaged. PARYLS® PSU F3150 pellets absorb moisture very rapidly. Therefore, the pellets need to be dried at least…
About LNP THERMOCOMP* GF006 is a compound based on Polysulfone resin containing 30% Glass Fiber.&& Product Description Supplier SABIC Generic PSU Material Status Commercial: Active Availabilitys North America,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method…
About PARYLS® PSU F3250GL20 pellets are supplied in cartons lining aluminum foil bag, which can be stored indefinitely, provided the packaging remains undamaged. PARYLS® PSU F3250GL20 pellets absorb moisture very rapidly. Therefore, the pellets need to be dried at least…
About TECASON™S is a transparent engineering plastic known for its chemical resistance, rigidity, high-temperature performance, and its ability to operate in an autoclave environment. TECASON™S is FDA and NSF compliant and holds its excellent mechanical properties over a wide range…
About Made from UDEL® polysulfone resin, these stock shapes remain stable, resisting creep and deformation under continuous load and elevated temperatures. They have high tensile strength and, as temperatures increase, flexural modulus remains high. Thermalux products will withstand exposure to…
About Udel® P-1710 polysulfone (PSU) is a tough, rigid, high-strength thermoplastic that is suitable for continuous use up to 300°F (149°C). The resin is resistant to oxidation and hydrolysis and withstands prolonged exposure to high temperatures and repeated sterilization. Udel®…
About Unreinforced, higher viscosity injection moulding and extrusion grade, tougher, with improved chemical resistance and demolding optimized.&& Product Description Supplier BASF Generic PSU Material Status Commercial: Active Features Good flexibility,Solvent resistance,HB,V-2 Availabilitys Asia Pacific,Europe Process Methods Extrusion Technical Data PHYSICAL…
About Udel® P-1700 LCD polysulfone is especially well suited for the fabrication of porous membranes for filtration applications. The membranes are usually in the form of hollow fibers, but tube, plate or spiral wound forms are also used. The membranes…
About Udel® P-3500 LCD is a very high molecular weight grade of polysulfone, and therefore offers the greatest toughness and chemical resistance of the available grades. It is well-suited for extrusion. The advantages of Udel® P-3500 LCD are attributed to…
About Ultrason S 6010 is a high molecular weight injection molding and extrusion grade with excellent chemical resistance (stress crack resistance) and good solubility in typical solvents (N-methylpyrrolidone, dimethlyacetamide, dicholormethane) used in the production of membranes or coatings. Applications Typical…
About Udel® GF-120, resin is a 20% glass fiber reinforced polysulfone compound. Glass fiber substantially increases the rigidity, tensile strength, creep resistance, dimensional stability and chemical resistance of the polysulfone resin. The high performance properties and attractive price make these…
About Udel® polysulfone is a tough, rigid, high-strength thermoplastic with outstanding hydrolytic resistance. Udel® P-3500 LCD MB series polymers are particularly well suited for the fabrication of porous hollow fiber and flat sheet membranes using a solvent-based process. These high…
About Udel® P-1700 polysulfones are tough, high-strength thermoplastics that are suitable for continuous use up to 300°F (149°C). Udel Film is resistant to oxidation and hydrolysis and withstand prolonged exposure to high temperatures and repeated sterilization. Udel® P-1700 polysulfone films…
About Ultrason S 2010 G4 is a 20% glass reinforced, medium viscosity injection molding PSU grade with high rigidity and strength. Applications Typical applications include circuit braker parts, lamp holders, heat shields, impellers, and printer cartridges.&& Product Description Supplier BASF…